My BEST TIPS for AWESOME 3D Prints! | Arranging Various Props in Ultimaker Cura
ฝัง
- เผยแพร่เมื่อ 15 พ.ค. 2024
- In this video, I'm going to show you how I set up my 3D prints for success in Ultimaker Cura. Some of these tips can even save you TIME and MONEY! I hope you find this video helpful, and please let me know in the comments if there is anything that you would like me to go into more detail on in another video!
▼ MENTIONED IN THIS VIDEO
Ultimaker Cura | ultimaker.com/software/ultima...
MK 85 Helmet | bit.ly/3lipZUj
Red Hood Helmet | bit.ly/3DjfBBH
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
Mandalorian Helmet | bit.ly/3FuG2Xk
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
Black Panther Helmet | bit.ly/2ZUPWkr
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
Nova Helmet | bit.ly/3ajlqTe
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | Frankly_Built
TikTok | tiktok.com/@frankly_built
Twitter | frankly_built
Facebook | franklybuilt
Reddit | reddit.com/user/njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | www.patreon.com/FranklyBuilt
Frankly Built Merch | TeeSpring.com/FranklyBuilt
▼AFFILIATE AND DISCOUNT CODES!
CREALITY | bit.ly/3gV8iIo
☞ Visit Creality for my favorite FDM 3D printers, from entry
level to advanced!
EPAX 3D | epax3d.com?ref=25
☞ Visit EPAX 3D for my favorite resin 3D printers!
Use code “franklybuilt” for 10% off of E10 Series Resin Printer
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
AMAZON | www.amazon.com/shop/franklybuilt
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
PRINT BED FILAMENT | www.printbed.com
☞ Use Code “Frank” at checkout for $4 off a roll of filament!
NIKKO INDUSTRIES| www.nikkoindustries.com/
☞ Use Code “Franklybuilt” at checkout for 20% off awesome files!
▼TIME STAMPS!
0:00 - Welcome!
1:07 - Printing Multi-Part Helmets (MK 85)
4:04 - Finding (or making) a Flat Edge (Nova’s Star)
5:30 - Printing a Dome (MK 85)
9:04 - Support Settings to Save Time and Materials (Nova)
11:03 - Printing One-Piece Helmets (Red Hood)
12:41 - Printing Detailed Helmets (Black Panther)
Disclaimer- This video is NOT sponsored by any of the brands mentioned above or throughout this video. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me! - บันเทิง
![ตรงที่เดิม - ฝน พรสุดา [ต้นฉบับ :เบส ขวางหวัน]](http://i.ytimg.com/vi/c5YnbGEztI8/mqdefault.jpg)
Frank: This isn't a one size fits all
Me after a successful print: I'M NEVER CHANGING ANYTHING EVER!!!
Frank, this was a massive help, I've been struggling with removing supports and the support density has helped me no end, yesterday eas the first time I printed with a raft and used the support density that you described and the supports came of sooooooo easy and didn't leave a massive mess. Thank you
Wonderful video, Frank! I'm loving these Cura tutorials; they've made my life SO much easier!
your the man dude, thanks for the help. I picked up a new Ender 3 S1 Plus with the intention of printing helmets. Print orientation has been a real concern of mine since it drastically changes print time and materials used. Thank you for sharing your experience and wisdom. Stay blessed!
dude this is amazing, i used to jump from video to video in your channel just to find the info i needed and now you put everything i need into just one of them, youre awesome man
Another awesome video tutorial. Thanks Frank. As you know, I’m just starting my 3D print journey. My first print is Mjollnir, currently on my Voxelab. All your tips have helped me a ton. Cheers brotha 👌🏼
This video was so helpful! I kinda want to start on printing things myself and im trying to learn as much as possible before actually buying a 3d printer and this and many of your videos help me a lot :)
Great Video!!! ill defiantly put this is my "3D print important" folder!! You always have great info to share... thanks Frank!!
On my first 3D printed prop, a scorpion mask, I wanted to save some time, because it was my first prop and I didn't know Prince usually took so much time. I positioned it forward, and all of the cracks and crevices were just filled with support material it took blood sweat and tears to get that all out, and I learned a valuable lesson lol
This really helped us out, that answered a lot of my questions about files and with how to use it, thank you
Brilliant video love that black panther helmet I hope we get to see it finished in the future 🙏
Another strategy for preserving fine details at the bottom of a model is to turn off the "Automatically drop models to the build plate" setting (Preferences > Configure Cura> General) and raising the model a millimeter or two off the build plate so that everything at the bottom is on supports regardless of orientation. Z-clearance permitting you may also be able to print more vertically, potentially reducing print time and support material. In some cases, though, doing so may just raise some features that require support, like the eyes on the mask at the beginning, making for taller supports without really reducing material used. It's also a good idea to keep *some* tilt for tall prints to make sure they don't topple over before they finish. So it may not always be the best option, but it's shaved between 30 minutes and 1 1/2 hours off of a few prints for me.
Its amazing how much 3d printing has improved. I've seen some printers in the affordable $200-500 range. Tempted after watching this video! Thanks for sharing
YES, THANK YOU omg I have been looking for a update on this tutorial, thank you
I just took the plunge, tonight I purchased a creality Ender 3 pro. I have been practicing with cura . Thank you for great advice.
First time printing the iron man helmet on my ender 3 pro. I cut the top in half to fit and printed both parts upside down to cut time, supports, and they came out great. Thanks!
Puh, deine Support beim mk3 Helm sehen aus wie bei mir, hab die nur mit nem drehmel abbekommen so fest waren die.
Thx für deine phantastischen Videos, du bist eine große Inspiration und ganz großes Danke das du mir dieses klasse Hobby so nahe bringst.
My bro. Aloha. Great videos as always. Haven't got to printing the nova yet but ironman, black panther, iron spider,, predator and others done on the ender 3 was a mission and a half. Thanks for the information and inspiration 👊🤙
Fantastic video! Thst support density and infill percentage setting gets a lot of people.
Great video, we really like some of your layouts and I hope it helps us make some cooler helmets in the future
Frank thank you I wasn’t shore how to place my prop without you sing many supports
Keep this amazing content coming and keep inspiring others!
Thank you, thank you, thank you for the Black Panther orientation explanation. I've had so many issues trying to print this file.
This has been a huge help. Thank you!
Thank you so much for this videos frank
Thank you for the video. I didn't know support blocker was a thing. Everything else was indeed awesome!
Your devotion towards others is out of this world!
True
Seriously, I love how he explain and share knowledge, even answer random questions on instagram
I'll decrease my Support Interface Density too. I find that it can be a real pain to sand off at times. I also take advantage of using just a brim, which saves time and filament, but like you said it's not one size fits all.
DUDE! You helped me soooo much! thank you!
Great video! Really informative!
Just looking at the data, making just a few adjustments I can save %10 time, but up to %30 filament. Thanks for the tips. My first print of the Iron Man helmet waas a disaster, but one that you can look and and learn from (which you've mentioned on other videos) I did order an extender kit for my 3D printer to take it to 400x400 so piecing and welding should be eliminated.
This helped a lot, thank you
Thx for teaching us this, ur a really good teacher may i say :)
I know that this was a year ago but this has helped me a lot i didnt know i was supost to make the infill density to 2 it has helped me print things so much better,
and Thank you Frank. :p
Awesome work,as always 👍🏽🔥🎃🔥👍🏽
I've watched so many of your videos I found myself humming your intro theme song this morning. Great video yet again
No way!
very good video
i started printing only a few months ago
it has given me the move i needed to get a new hobby and will say it is worth and its lot of fun to do
anyone thinking about it try it
P.S if you don't want to spend time making your own most likely someone has done it this is a good way to start as well XD
Great info.
Good info man thanks ,go a cr10 v2pro at work and was wondering at what speed i could print and how to save time on prints , we tend to print stuff with alot of supports ,this really helps
First time watching you. Subscribed...'nuff said.
Really helpful video. Thanks man! I've already printed a few helmets. Black Panther being one of them but I need a better one as mine doesn't fit together with magnets and the fit isnt great. Took days too like you said. I will definitely be trying out your tips on printing dome side down for a Mando helmet. I want to print a full suite but I haven't quite got to grips with Armoursmith yet for sizing...
Awesome background!!!!!
the 4k is cleannn
Thanks Frank!
Great content here!
Waiting on that PR helmet. Using do3d models the backs print fine in one piece, but I haven't found a way to orient the front that don't use a ton of support and end up cutting them in half somewhere above the visor.
Very informative video for helping me work on how to go about printing a clone trooper helmet. One question though in regard to supports. Are you using the gyroid pattern on those as well as the helmet, and if not what have you found to be the best option? Thank you.
Great video
can u do a video on how to weather spray paint on your prints??
In one of your previous scaling vids i noticed we have the same size head (well like 99% the same) what do you scale your mk85 helmet from cgtrader to? Save me printing test rings, love the channel your the reason im making a suit!!
I can't find your video about direct drive parts. 😢 Thanks for the videos I've seen so far
Very well done. I learned quite a bit.
Do you use Acura exclusively? Or have you worked with any other slicers?
Hello, I was wondering what your favorite beginner/budget friendly 3D printer would be. I know you have made the videos and streams but I was wondering now if you have an updated version. I was wondering this because of your solov sv 03 video. Do you still recommend that over the creality ender 3?
Thanks for the Sunlu discount, 10 rolls of PLA incoming :)
Nice to know I’m making a Batman mask hopefully today and it was gonnna take 5 days now it gonna take less so I can work on the rest of the suit faster
Can you show a video on how YOU fuse and or glue the iron man helmets together
Love content
This was a great guide! (But you forgot your etsy link in the description! )
Ooof
Thank you for the info, I am trying to 3d print the Star Boost whole suit and i am having problems with the Helmet...I am not a small guy 6'4" about 270 and i have a CR10V2, and i need to cut the helmet and use less filament.
Besides lowering support density, you can also switch the support fill to concentric, and usually save a lot of plastic by dialing in just enough space between the lines to minimize the time spent building support.
Frank where can we go to get a headscan for a 3d printing. PLEASE LET US KNOW.
can you share that raft setting to come off that easy and cleanly
I wanted to let you know about the project I had I was talking about it before and I used the lawn the dark filament with some graphite powder and it still glows in the dark check it out do-it-yourself it's pretty cool
Hi, what filament did you use? I have problems with eco-pla filament. I would like to try with the filament you used to print the ironman helmet
What size nozzle are you using to print and are they the settings you use with that nozzle great video this week thanks for showing us how you are doing it
I use the same settings in this video lol it would just be a repeat of this
@@FranklyBuilt so it doesn’t matter what size nozzle you used I am printing with a size 4 on my CR10 V2 and on the Ender 3Pro I was just wondering if I needed to change the nozzles up to a size 6 to use the settings you are using thank you for your help
I love the mando helmet in red and gold colors. Where did you get the silver colored visor?
I made it. Chrome window tint
Support density....UBER important!!!!! I didn't know the magnet holes have been added!! Genius! Dude. Your PC is amazingly fast!! What are you using to run Cura?? My laptop freezes up SOOOO bad! I absolutely LOVE these tutorials!!! Keep em coming....maybe a Starlord helmet? 😁
Well…the video is ya know. Edited haha
@@FranklyBuilt 😂😂
I have never managed to print that bloody star on the nova helmet
When printing a full head helmet, would you use PLA or PETG?
What about nozzle size and print quality, I bought one model, rocketeer helmet that in the description says to print with a .8 nozzle, Im using the standard .4 as I don't want to change to a larger nozzle, I know that will increase print time but do I then max out my print quality to .4 or leave it at .15 or .2? Can you go over those settings?
Im trying to figure out the orientation of a master chief helmet to print on one shot on my n3m
I’ve been trying to figure out my supports and how much is needed a couple weeks now to reduce my time and mats use; support blocker. Had no clue
Hello friend, what a great video. Next week I want to print (for the first time) a Deadpool helmet. What would you advise me regarding speed, infill, overhangs, and temperature? I have an Ender 3 Neo Max and I'm a beginner. Thanks. I hope it's clear, English is not my native language.
Amazing vid. What glue do you use?
Cyanoacrylate
@@FranklyBuilt Thanks!
Are you selling his helmet (iron man mark 85 helmet)from thingevers
Frank, how do you size a helmet to fit your head?
What do recommend for over hang. I got everything dialed in but im having over hang issues.
Please show us how to orient other iron man parts! The back and chest look daunting!
Hello I'm looking to start 3d printing what printer do you use for the anime swords
Lmao the short iron man in the back😂
I have been having problem with glue..plz. What is a good glue to use for PLA?
Do you think these settings would work for an Uber Jason X mask on CR10-V3?
What are your setting on your ender?
You should make a doom slayer outfit!
Hey sir I have a ender 3 so can you suggest and first' prop for ender 3
Looks great. Link for stl?
By taking out all the supports in the middle of a Mando helmet won’t it fall apart? It’s almost printing in mid air! Or is the over lay good enough?
Hey Frank, I love the video! Question on the black panther helmet. With having that much detail, did you print that at a higher quality, or just standard?
Yep! I printed at a dynamic I think 🤔 whatever .16mm is
@@FranklyBuilt thanks! I’ve been wanting print this one so I’m glad you went over it in this video and I might give it a shot now!
Frank, I am having trouble printing the Cod/ Crotch piece for the Mark 85 Iron Man suit on my Creality CR-10S. I have failed printing several times. May I have some advice?
Uhhhh cut it into smaller parts and print it
Hey where do you get support blockers for cura?
When you block off the center of the helmet around @11:00 does it not need that support in the middle of the helmet? I want to do a mando one soon and would love to save the extra hours and resources if possible.
…no lol that’s why I said and showed it doesn’t need it haha 😆 I also cover it in my mando tutorial
like Ur videos, question I'm new to this 3d thing when I got machine it printed fine in center of bed but when i downloaded Cura it started to print in front left corner of plate. need help how do i get it to print in center again.
can i use your cura settings on ender 3v2 ?
Have a question for you. Can I use my i pad pro for this printer?
I’m working on making Loki horns at my school but I have to drop the STL onto Cura because we use onshape and it doesn’t do much :/
I have a neptune 3 max. Im trying to do figures. And its in pieces. They are about 3 to 5 inches a piece. But they are taking daysssss to print.. can you help me please with settings. Its making me nuts.
Frank, have you encountered problems with your extruder (nozzle) colliding with a print? Ender 5 Plus, I've started having issues with the extruder hitting the print and knocking it over. Everything runs fine, excellent in fact....80-90-100mm+ , then at some point (not identical) the nozzle collides with the print and knocks it over. I suspect the z-axis is binding, but running the bed up/down by itself reveals no issue. Have not had this issue prior, it just started with an Ahsoka Tano costume part, and has repeated the problem 4 times...I video recorded it so I could see what happened by not the actual cause of the issue.
Hmm I’m not sure my dude maybe try posting up in the discord?
@@FranklyBuilt will do bud. Many thx, love your channel.
I increased my z hop so it would go up over parts....
Snow Wolves Productions did that. Not fixed. Printing on a raft so it's not warping either. Happens on two different PLA+ filaments, speed change is no effect. Part print quality looks great all the way until it hits. Weird thing is it was fine for weeks until now. Bed leveled, z axis is identical on both lead screws. So am going to take that apart, clean an lube it, upgrade the couplers, and swap build plates with an identical glass plate, then level, mesh, z offset, and print five towers one each in the corners and one in the middle to see how that does.
What 3d printer do you reccomened for beginers??
I got a question, do you alway have to use supports for large prints? I recently printed a 1/6 scale 2018 dodge Durango and it took 32 days because of the supports, which took 4 1/2 filaments. So do I necessary need supports?
You need supports to supports impossible to print areas
I'm getting a haze on my paint. Not sure why... used sandable dupli-color then dupli-color metal cast red. Haze, then used Krypton fusion paint and primer, then red again...same problem...