Hi Brad. You can actually select the whole drawing at once - by going to the Models and selecting the Sketch or the Body, which will select everything. This makes complicated sketches like the flower pattern much more workable :-) HTH, Danny
@Wannageering- Ah, man! Yes, you are correct. I keep forgetting that you can do this! I definitely am going to add this to my "What I've learned from the Community, again!" LiveStream
Brad, the "measure" tip at 18:30 is going to be sooo useful! Thank you! One issue that I could use help with is tips on fixing (avoiding) yellow warnings. Redefining sketch plane is easy, but sometimes I can't figure out how to fix the yellow points in the sketch. Maybe I've been abusing "project"?!
Hi, any chance you could explain how to move an imported SVG after it's been imported ? It seems locked into place. I found an old post on F360 forum about breaking a link from a purple geometry but I can't see it. Thanks edit : ok I found out how > edit the sketch it created, select all parts of the sketch, and clic "fix/unfix" at the top
do you think it would be a lot handier if when using the scale arrows to scale the svg that the numbers appear to aid a person instead of scaling by eye without typing in the precise measurement by hand.. its just one of my peeves :)
Great video Brad but how would I do this if I wanted to make the reverse of the coffee design, that is if I wanted to make a square frame with the outline of the cup inside? Thanks
Brad, you mentioned already in several videos that you have a CNC machine. can you share more information about it? what brand is it? what are its pros and cons ? dimensions? is it your first CNC? would you recommend it as a first machine?
Brad two tips, dump the screen keyboard as it gets in the way and it is kinda useless. I know you asked for opinions on this in a previous video but I waited on commenting until I saw a "regular" video. The other tip is unless you model the text or the graphics, don't make a solid at all in design. Instead when you create your setup use a fixed sized box of your liking ( something like 6x24x.75). For your tool path mirror use an (YZ?) offset plane right to the edge of your graphic that you want to mirror. And if the setup stock isn't big enough after your mirror, just resize the stock in the setup. The mirror works the same.
Hi Brad, Great tutorial, i'm looking into a Buffalo CNC for adding details to hobby projects and storage drawer faces they say it needs to be usde in conjuction with fusion. this tutorial explains perfectly how to use SVG's the way i needed to know. any thanks for sharing. Al'
Teacher, it would be great to explain how to make graphs of mathematical functions with Fusion 360, also how to intersect these graphs in space and to calculate volumes of solids with triple integrals Excellent videos
Created my own SVG file and Fusion would not take my "save as SVG" I had to select "save as plain SVG" file. That allowed me to get it into fusion without error. Once in I was able to scale it down to fit on my sketch plane. When I moved the SVG file the computer was lagging by about 4-10 seconds. Then it just gave up and never recovered will have to shutdown fusion cause nothing seems to work under the menu items. Is there something I am doing incorrectly?
Hi Brad. Out of topic of this video but i'm trying to combine a f3d file (or a step file) with a stl file but all the times i try that the system crash. The stl file is more or less 2k triangles, so not so big amount. There is a way to solve this issue ?
Please do some 5 axis stuff. Along with a Multi holding fixture like the Raptor Multi fixture and program one part and use the Pattern feature to do the other parts on the Raptor Multi fixtures. A bit adavanced but would make an awesome viewed video.
@Darren- I mentioned in one of my previous LiveStreams that one of my team members, Angelo, is going to start doing CAM LiveStreams. He's WAAAAAY more knowledgeable in CAM than I am, so I can't wait to see what he's going to be doing.
Abram- You can create your own custom tools in the Manufacture workspace. I recommend watching this video to learn more about that: th-cam.com/video/2e4MTgqiztk/w-d-xo.html
![LEARN FUSION 360 FAST! A Beginner Tutorial [step by step instructions, no prior knowledge required]](http://i.ytimg.com/vi/mK60ROb2RKI/mqdefault.jpg)
Hi Brad. You can actually select the whole drawing at once - by going to the Models and selecting the Sketch or the Body, which will select everything. This makes complicated sketches like the flower pattern much more workable :-) HTH, Danny
@Wannageering- Ah, man! Yes, you are correct. I keep forgetting that you can do this! I definitely am going to add this to my "What I've learned from the Community, again!" LiveStream
Some tips are wonderfull. This is one. THANKS BRAD.
Brad, the "measure" tip at 18:30 is going to be sooo useful! Thank you!
One issue that I could use help with is tips on fixing (avoiding) yellow warnings. Redefining sketch plane is easy, but sometimes I can't figure out how to fix the yellow points in the sketch. Maybe I've been abusing "project"?!
Hi, any chance you could explain how to move an imported SVG after it's been imported ? It seems locked into place. I found an old post on F360 forum about breaking a link from a purple geometry but I can't see it. Thanks
edit : ok I found out how > edit the sketch it created, select all parts of the sketch, and clic "fix/unfix" at the top
do you think it would be a lot handier if when using the scale arrows to scale the svg that the numbers appear to aid a person instead of scaling by eye without typing in the precise measurement by hand.. its just one of my peeves :)
Thank you , great information.
Great video Brad but how would I do this if I wanted to make the reverse of the coffee design, that is if I wanted to make a square frame with the outline of the cup inside? Thanks
Brad, you mentioned already in several videos that you have a CNC machine. can you share more information about it? what brand is it? what are its pros and cons ? dimensions? is it your first CNC? would you recommend it as a first machine?
Brad two tips, dump the screen keyboard as it gets in the way and it is kinda useless. I know you asked for opinions on this in a previous video but I waited on commenting until I saw a "regular" video. The other tip is unless you model the text or the graphics, don't make a solid at all in design. Instead when you create your setup use a fixed sized box of your liking ( something like 6x24x.75). For your tool path mirror use an (YZ?) offset plane right to the edge of your graphic that you want to mirror. And if the setup stock isn't big enough after your mirror, just resize the stock in the setup. The mirror works the same.
Thanks for the tip. I missed this one.
pro tip : watch series at flixzone. Been using them for watching loads of movies during the lockdown.
@Titus Terrence yup, been watching on Flixzone for since november myself :D
Thanks Brad that read very informative
If you are importing a technical drawing in SVG and you need the drawing to be a certain exact size ¿can this be done inside FUSION?
Thank you for tutorial
Wow that's great, my brain wen't into create mode. Thanks!
Hi Brad,
Great tutorial, i'm looking into a Buffalo CNC for adding details to hobby projects and storage drawer faces they say it needs to be usde in conjuction with fusion. this tutorial explains perfectly how to use SVG's the way i needed to know. any thanks for sharing. Al'
Teacher, it would be great to explain how to make graphs of mathematical functions with Fusion 360, also how to intersect these graphs in space and to calculate volumes of solids with triple integrals
Excellent videos
@Emerson- Unfortunately, that is way above my knowledge level... :)
How can you center an imported SVG to your work plane? something like a center constraint.
Created my own SVG file and Fusion would not take my "save as SVG" I had to select "save as plain SVG" file. That allowed me to get it into fusion without error. Once in I was able to scale it down to fit on my sketch plane. When I moved the SVG file the computer was lagging by about 4-10 seconds. Then it just gave up and never recovered will have to shutdown fusion cause nothing seems to work under the menu items. Is there something I am doing incorrectly?
Hi Brad. Out of topic of this video but i'm trying to combine a f3d file (or a step file) with a stl file but all the times i try that the system crash. The stl file is more or less 2k triangles, so not so big amount. There is a way to solve this issue ?
Please do some 5 axis stuff. Along with a Multi holding fixture like the Raptor Multi fixture and program one part and use the Pattern feature to do the other parts on the Raptor Multi fixtures. A bit adavanced but would make an awesome viewed video.
@Darren- I mentioned in one of my previous LiveStreams that one of my team members, Angelo, is going to start doing CAM LiveStreams. He's WAAAAAY more knowledgeable in CAM than I am, so I can't wait to see what he's going to be doing.
Hello Brad how can I get v bit tool's into Fusoin 360
Abram- You can create your own custom tools in the Manufacture workspace. I recommend watching this video to learn more about that: th-cam.com/video/2e4MTgqiztk/w-d-xo.html
This tip no longer works, well not for me
Which tip are you specifically talking about?