I challenge you to show us installing a battery and then running the truck. Talking about how easy it is, and then actually doing it are two different things.
I bought the RTR version. 2 things: why are the standard powercables so short (try soldering other connectors to those cables and switch batteries. 2nd: why do none of the portals nor difs have Andy lubricant in them? They were bone dry in my Capra. Have to check the gearbox. That is not RTR in my book...
What are the literal dimensions of the first battery you guys looked at in the video, This battery DYNB37353. The 11.1V 3700mAh 3S 50C Reaction 2 LiPo Battery: EC3 . The dimensions on the website always seem to be off either by a little, or a lot. If I could get the literal Length/width/height, I would appreciate it!
Love my new Capra RTR! Could also mention there are adjustment screws at the bottom of the battery tray. Stock i think they're opened up all the way but it's good to check just in case they're not. Could also probably make the slot longer and get a couple mm more room. I would have liked to see each of the batteries installed and hood put down and latched. That's what is great about videos, you can SHOW it being done! I have been running old FPV racing drone batteries and they work great. 3S 1500 seems to be about the biggest i can fit. Bonka 3s 1600mah. Also running 3s 1300mah packs.
I agree I waited a long time to get the recommended dynamite Reaction2 2S 4000mAh batteries. I've tried several ways to get the battery installed without putting stress on the wires out of the hard case. I see no way to make these batteries work in this vehicle. If anyone has gotten these to work, do you have any suggestions for me?
Just got the new 4ws capra on order but have 3s and 2s batteries at home already. Can I run both one after the other without changing anything in esc? Is it auto switching to the 2s&3s?
bought my capra a month ago & ive yet to see the thing actually move. first battery would not fit, wait another 2 weeks for the 2nd to arrive & it has to be stuffed rather tightly inside due to no space for the wires. pretty unhappy with this huge waste of money due to a crappy design
My dig servo went out in a week, amazon said I could send back the truck or they would refund half my money back! I ain't no fool took the money.But that's not why I'm here I have been getting about 45 minutes run time with smart 30c 3s 11.1v 1300mah very lightweight batt.Sweet deal for me anyway has anyone else tried this?
This video gives wrong informations. With Spektrum batteries, even if the Low Profile Bullett Connector is used (which, moreover, obliges the use of a soldering iron, cables, connectors, and leaves the terminals uncovered, with a high risk of short circuit), there is not enough space left in the battery compartment of the Axial Capra to accommodate the internal connector connected to the ESC. Be careful before buying!
My kit .. I use the ProTek RC 3S 120C Si-Graphene + HV Shorty LiPo Battery (11.4V/4100mAh) .. perfect size and fit :) - but good to know there are other options out there.
Why overlook the smart 1300mah 30C 3S 45 minute run time cheap as hell & you don't even have to pin the hood.Please give it a try you will love your capra with this battery.They don't ALL fit I know
Yeah but where is the battery plug with the bullet style pack? Inside the car. Which means you have to take the side panel off to connect the battery, and even getting the pack in and out of the tray is a chore. PITA.
I think the designer of capra make some minor mistake. I’ve tried myselft to fit the battery in the capra and its not so easy. With shorty pack sometime the cable a bit difficult to fit in. Why can’t they make it simple as others RC car? Just throw in the battery and its fit right away even toddler can install it
As you can imagine our products are very popular right now and our shipping and service teams are working very hard to get to your requests as quickly as possible. We appreciate your patience and loyalty.
I challenge you to show us installing a battery and then running the truck. Talking about how easy it is, and then actually doing it are two different things.
I bought the RTR version.
2 things: why are the standard powercables so short (try soldering other connectors to those cables and switch batteries.
2nd: why do none of the portals nor difs have Andy lubricant in them? They were bone dry in my Capra. Have to check the gearbox.
That is not RTR in my book...
What wheels are those on the orange axial Capra?
What are the literal dimensions of the first battery you guys looked at in the video, This battery DYNB37353. The 11.1V 3700mAh 3S 50C Reaction 2 LiPo Battery: EC3
. The dimensions on the website always seem to be off either by a little, or a lot. If I could get the literal Length/width/height, I would appreciate it!
Love my new Capra RTR! Could also mention there are adjustment screws at the bottom of the battery tray. Stock i think they're opened up all the way but it's good to check just in case they're not. Could also probably make the slot longer and get a couple mm more room.
I would have liked to see each of the batteries installed and hood put down and latched. That's what is great about videos, you can SHOW it being done!
I have been running old FPV racing drone batteries and they work great. 3S 1500 seems to be about the biggest i can fit. Bonka 3s 1600mah. Also running 3s 1300mah packs.
I agree I waited a long time to get the recommended dynamite Reaction2 2S 4000mAh batteries. I've tried several ways to get the battery installed without putting stress on the wires out of the hard case. I see no way to make these batteries work in this vehicle. If anyone has gotten these to work, do you have any suggestions for me?
Just got the new 4ws capra on order but have 3s and 2s batteries at home already. Can I run both one after the other without changing anything in esc? Is it auto switching to the 2s&3s?
bought my capra a month ago & ive yet to see the thing actually move. first battery would not fit, wait another 2 weeks for the 2nd to arrive & it has to be stuffed rather tightly inside due to no space for the wires. pretty unhappy with this huge waste of money due to a crappy design
😢
All super heavy. Also, It was super dirty of you guys to not include the little piece that goes on the dig servo.
My dig servo went out in a week, amazon said I could send back the truck or they would refund half my money back! I ain't no fool took the money.But that's not why I'm here I have been getting about 45 minutes run time with smart 30c 3s 11.1v 1300mah very lightweight batt.Sweet deal for me anyway has anyone else tried this?
Does the axial Capria come set to run Lipo batteries from the factory or do I have to change that?
This video gives wrong informations. With Spektrum batteries, even if the Low Profile Bullett Connector is used
(which, moreover, obliges the use of a soldering iron, cables, connectors, and leaves the terminals uncovered, with a high risk of short circuit), there is not enough space left in the battery compartment of the Axial Capra to accommodate the internal connector connected to the ESC. Be careful before buying!
My kit .. I use the ProTek RC 3S 120C Si-Graphene + HV Shorty LiPo Battery (11.4V/4100mAh) .. perfect size and fit :) - but good to know there are other options out there.
How long to these batteries last?
Depends on the motor and drive style
Why overlook the smart 1300mah 30C 3S 45 minute run time cheap as hell & you don't even have to pin the hood.Please give it a try you will love your capra with this battery.They don't ALL fit I know
Thanks Kyle & Brad very informative was still wondering if Spectrum makes a 3s that will fit my brushless Bomber? 😉👍
Yeah but where is the battery plug with the bullet style pack? Inside the car. Which means you have to take the side panel off to connect the battery, and even getting the pack in and out of the tray is a chore. PITA.
the battery compartment is a joke. and will cause me to immediately sell this turd
I think the designer of capra make some minor mistake. I’ve tried myselft to fit the battery in the capra and its not so easy. With shorty pack sometime the cable a bit difficult to fit in. Why can’t they make it simple as others RC car? Just throw in the battery and its fit right away even toddler can install it
these guys are crooks - nothing fits - nothing in stock - ill never buy axial again - what a nightmare
As you can imagine our products are very popular right now and our
shipping and service teams are working very hard to get to your requests as quickly as possible. We appreciate your patience and loyalty.
😢
I'm using my 1/10 buggy shorty pack :-) Fits perfect.
green shirt bro did this video with covid. props !
2 shorty goldbat battery on Amazon 32 your all welcome now stop complaining and go drive something
wrong connections
wow
My like.