This is the most entertaining test video ever. John seems like such a chill comical guy. The narration when he’s crawling has me in stitches hahaha I love it 😎 just a opinion 🇨🇦
I do a lot of real life crawling and width is your friend. I run 42" on my rig and there is not much I cannot get over. I have been wanting an R/C crawler for a while now, and this is the one. It almost looks like mine in real life.
I love that you threw the old Skool AX3 remote in for a twist. I just put your 3300kv Puller Pro stubby sensored and Mamba X in my OG SCX10 Rubicon with same radio. Lol! Awesome!!!
What we have ihe is some happy rock crawling! GREAT VIDEO! I've used your products for many years now! I have a kit coming and can't wait to put my favorite brushed esc in it. The brxl! Keep up the good work. Happy trails
Love the video John! Lots of good information and I love the paint job. Looks cool man. Can't wait to get all my Holmes electronics in mine when I get time to build it lol. Work has been so busy and working late has cut in on my play time lol. Me and my dad own a tire/mechanic shop so my work seems to never end lol.
I've had mine for about 2 weeks. i've been using a revolver 540 v2 1800kv with the sidewinder 4. i absolutely love it. it runs great, has awesome low speed control, and tons of torque.
Great video as always John! Awesome honest review of the Capra. Florida rip rap crawler here. We definitely have plenty of it. I find Hyrax to be a great tire on our rocks. Hope to one day get to shake your hand. Keep producing your awesome products! Maybe one day I can step up from the Trailmaster sport and get one of your higher end motors.
I am running the Ottsix KLR/m gold with chains in the Snow on my Axe. Took it out at the start of the blizzard the other day, by the time I was at my crawl spot there was an inch of snow on the ground. I climbed up a hill that on loose pack soil running the Hyrax Predators was a challenge this Fall, the Snowy Chained VooDoos climbed like it was on level ground, I was smiling ear to ear in surprise.
I like the Capra. Started with big power and 2.2 tires...changed to a Revolver 1800 kv , 11 tooth pinion and 1.9 in like it even better...all powered by Castle Mamba X ....I do like the self righting of the Capra ..you got to get the dig working you'll like the additional capabilities....I live in Tucson, AZ. Here we have a great deal of river rock in the low land in the desert areas great deal of jagged rocks hard on tires and cut them up pretty good...I did find Gens Ace Adventure 3600 and 4300 battery that will fit....I have been using a 1800 Protec battery I like it but with the 1800 kv it runs down quick...
Texas Crawler here. KLR voodoos are grat on smoother terrain, but the hyrax provide a little more clearance for the belly and high centers less. The Front wheel drive dig function helps lean it over.
Kent Vanderploeg, So far, so great! I actually have a brand new 13t CrawlMaster Expert that I could have used but I chose not to due to the stock gearing. With the stock gearing, 10t pinion and 20 turn motor it has plenty of wheel speed.
@@fight4uthisway Glad to hear it! I'm betting with the stock 14T it should still have plenty of wheel speed, but I'd rather be crawling. Wheel speed only for tricky spots.
G'day from Australia 🤟 I work in a quarry so I see rocks all day every day 😏. I have a scx10ii and a umg10 both very capable, next will definitely be a Capra, your video sold me so just waiting for it to come out over here👍
From Maine and N.H border. I live on the edges of the White Mountain national forest. I cannot wait for the snow to melt to get on the rocks on the Saco river.
Central Montana guy here. Waiting for my Capra to show up. It’ll have Hyraxs to start with .225 SLW hubs on some VP Methods. I’ll be running a BXR ESC with a Reedy Radon 16T motor and a Shift RC servo.
Very informative review JRH, thanks for putting it out. I tried reaching out on FB messenger, but I have a sneaking suspicion you don't use that! Note on the Dig, you can install the spacer and lock the Dig without zip ties.
I recently installed HH motors in my nephew's trucks. A trailmaster sport / hw 1080 in the deadbolt and a 380 revolver / micro x crawler edition in the Barrage Gen 2. I have been running Tekin RX4 / Roc412 setups in my deadbolt and VS4-10. After getting my first taste of the HH motors, they will be my go to motors from now on. Now just have to wait for the Magnums to be back in stock.
We really had a run on magnums suddenly, what would normally last a few months got bought out in a week. Caught with my pants down, it will be a few months until we get more inventory.
What Foams are you running with the VooDoos. I tries some Stock foams from some Proline tires but I don't think they have enough volume for the Ottsix tire. Drove them in the Snow, and a couple days later noticed 2 tires had flat spotted. When I took the wheel apart and pulled the foams I noticed they were damp. I think the evaporating moisture was causing a vacuum and flattening the tire, because as soon as they were off the wheels they bounced right back to shape.
Behind the curve, was thinking of getting a Lasernut, but the drive train issues have me waiting. So i have decided to go for a Capra build then re-evaluate a rock racer in the Spring.
On the front I done the 13-22t by hot racing in the front portals ad a few more goodies on mine running everything else stock or than brass in the front also gonna put some in the rear but not as much. I have the blue/green rtr version. Love it so far
I'm here in South Florida. Yes we do have some rip rap here, mostly under bridges as you said. It's all good. Portals shine in the rip rap vs. a straight axle rig.
You would pop a blood vessel if you see what I do to these things.. I have a 30+ mph yeti and am looking to do the same with the Capra. Though the carpra looks like it will need quite a bit of modifications. But don't get it wrong I have crazy low end smooth torque as well for crawling where it needs to. Anyways, love the video, your a very knowledgeable fella just subbed. Thank you! And yeah 2.2's look like it would definitely benefit this rig
Working on my build now and have the 1400kv revolver motor with a sw3. With some RC4WD wranglers with crawler innovations foams. love your motors I have a pile of 550 cans that i use in all my brushed builds.
HolmesHobbies hey thanks for the reply brotha! Love the products and vids man. Thinking about getting the RTR version they just released. Looks like a great RTR seems to have all the same high quality components as the kit. Hopefully the days are gone where the RTR is a lesser product 👍🏻 same links shocks lights metal insert servo, everything. Keep up with the great work on the vids and products man.
I love my Capra! I pre-ordered through my LHS and ended up having to gut another rig to get this up and running. Out of the box it was very good. I swapped out shocks (100mm Desert Lizards w/50wt oil) and like how it sits (level links) and can articulate better than with the stock shocks. Still tuning and testing. I currently run Rock Beast 4.55, but have some Ottsix KLR/M in 4.75 on the way. I did go with an Axe 2300k (since that was in my other rig). I'll be replacing what I took with a Holmes motor (as I have in my other crawlers).
Hey John. I live in Overland Park, Kansas and I just realized that my new Capra RTR is super fun to drive in snow. I can't imagine how well it would do with 2.2s on it.
Tires: Hyrax Preds and TRX Canyons (cut, they're pretty good actually) Rocks: Live in Phx, AZ. I've got some legit spots within a mile of my house. Motor: 16t 540 (as of right now) Work: Program and run 2 plasma tables and do R&D work for new products to help grow the business I work for.
I would be really interested to see a comparison between the Capra and the RR10, since they have comparable ground clearance achieved through different design choices.
Using an axe syatem in mine, but would like to go to a 3 gear system with the vader skid and hobbywing fusion to get the C of G lower. Right now there is simply too much weight sitting high up in my cab.
Trying to run 2.2s on my capra with potentially a brushed motor but open to other options. What do you recommend? I want high torque and controlled slow crawling as well
What do you think of the mamba x and the 1406 2280kv slate motor with a proteck 370tbl servo for an electronics set up.. any unforeseeable complications I am new to rc rock crawling and this is my first rig
Hi john, I have a Capra with 55T and 10p , I am also using 2.2 tires with beadlock but the fome is from 1.9 wheels, That gives me more real look as a low pressure tire I like it , also I would like to set up my dig but I have no idea how to do it, Can you make a video and how to do that thank you and be safe
Hi! I wait for you opinion from a while... What I don't like on this rig it's that fact you can't fit an 550 motor! Atherwais is awesome! I like the Deep whods tires, especially 2,2 and I'm truck driver... From Spain. Nice and informative video, like always, thank you!
16T CM Pro with 12T pinion, HV500V2 & BRXL here. Trying PL BFG Krawler KX to start. Did go to a shorter internal spring shock. Def. curious about the firmware update. Great paint work!
Not sure if anyone has mentioned it, but I was able to get to a 9t pinion on my Capra. No cutting or hacking and can't be done with the stock motor. Motor needs to have holes next to one another. X o O (motor shaft) X o X=screws So now my Capra is around 48-49:1. Hopefully the diagram translates in the comments. And the gear mesh is excellent.
Great video, Am a new sub. I have a Capra and it is amazing, I made a few videos of it for my channel and during those runs I have come to really like how it works. I think this may be Axial's best release in a long time. I have not found the width to be too much of a problem yet, but i have not had it in super tight spots.
I'm currently running a hobbywing axe 2300 with the 14t pinion on a lihv 3s. My only complaint is the size of the axe esc. I love the power and the controllability is there for me.
Hey John, I think that you've said in the past that there is a 15-20% increase in power/torque going from the Crawlmaster Expert to the Pro. What is the power difference between the Sport and the Expert? Thank You!
I had no idea all the levels of motors you offer, I just put on my first Holmes motor(30t expert). I like it alot, it has great low end control, but wanting a little more power/speed. Considering the revolver for my next option
John, how can you isolate the voltage for the steering servo and dig servo? I'd like to run a bec for steering but wont that send the same voltage to the dig servo? Thx!!
I've got those same 3s 850mah Nano-Techs! LOL I swear to you, the most versatile battery around! They were on "special" so I grabbed a bunch. I've used those things for everything from a park flyer foamy, transmitter pack, 10th scale crawler, BEC pack on my non electric Losi etc etc. Just a perfect size and output to have around. As for the Capra...meh, I don't know. I'm waiting around a bit. I'm sure I'll have one eventually, it's just not something I feel like paying "new release" dollars for. I have enough axles, transmissions, links, motors etc and chassis/cages lying around to build something similar in an afternoon. A piece of me wishes they did an SCX-10.3 type thing and take it to the TRX4, Gen8 etc. They need a newer, relevant trail rig. I don't think retrofitting portals to an SCX-10.2 is going to be enough. Oh, and I'm in Southern New England - CT. Nothing but some of the most beautiful forested land with rock outcrops and granite ledge!
Im about a mile from horizon hobby, in Champaign, IL. It's hard to find more than 2 rocks close to one another around here... Missing Memphis and the river bottoms..
Just got one! I'm pretty excited about this build. Any suggestions for a newbie like me? Much respect, i have a 16T holmes motor sport. I noticed you said to get a ten tooth pinion on the motor. I hit that sub botton! Cheers!
First things first. Just want to let you know that I appreciate your knowledge and the time it take to put out good content. I'm thinking about getting an axial Capra kit but I want to put something brushless in it that can crawl smoothly at lower RPM but also have enough power to jump me over an obstacle if necessary. Is that possible? If so what would be the best ESC motor combo to pick up?
I bought a new axial Capra and it was tore up right out of the box so I haven't got to play with it at all yet but I did get some new graphics on it and got some new parts on the way home so I'll be Twenty-One turn new steering servo I got two sets of 2.2 to go on it
John is like the Bob Ross of RC!!
My thoughts exactly
no way, i just said the same thing!
Lol good one! Iloveyour moves john
I'm not the only one who thought that.
I was thinking the Sham-wow guy after that into.
This is the most entertaining test video ever. John seems like such a chill comical guy. The narration when he’s crawling has me in stitches hahaha I love it 😎 just a opinion 🇨🇦
Wow, great video. Had no idea what you were talking about in the beginning, but love the Capra. Saving hard at the mo. Thanks for sharing. John
watch your video brighten up my mood! love your positive energy!
Love this guy! Hah, awesome personality.
I just ordered a Capra RTR and I plan on putting a Holmes Hobby Trailmaster in there.
Probably the best guy that talks well through testing the rc cars talks sense
thank you sir!
This is the most undramatic and calm run through the rockpile i’ve seen you do in awhile👌🏼😅 ap ap! There you go pop’n😄
I do a lot of real life crawling and width is your friend. I run 42" on my rig and there is not much I cannot get over. I have been wanting an R/C crawler for a while now, and this is the one. It almost looks like mine in real life.
How do you like your Capra now I love mine
I love that you threw the old Skool AX3 remote in for a twist. I just put your 3300kv Puller Pro stubby sensored and Mamba X in my OG SCX10 Rubicon with same radio. Lol! Awesome!!!
Picked up the Capra as my very 1st RC ever and I couldn’t be happier!!! Absolutely amazing vehicle, extremely well built.
Great video and review John. Big fan of your product line. Look forward to your next video.
What we have ihe is some happy rock crawling! GREAT VIDEO! I've used your products for many years now! I have a kit coming and can't wait to put my favorite brushed esc in it. The brxl! Keep up the good work. Happy trails
Best rig I ever owned. I want them to make a larger and smaller scale. Possibly more models like it
I like your review. Very professional. I so have the Capra in my sights. Subbed
I just otdered your sport in 16t into mine with the 2n1 spektrum 40a. So far works great with 1.6hrs on 2200mah 1.2 on 1800mah . Love it
I’m in Tampa Florida. Lots of bridge rock crawling. Just picked up my 3rd HH motor for my new Capra! Can’t wait.
Love the video John! Lots of good information and I love the paint job. Looks cool man. Can't wait to get all my Holmes electronics in mine when I get time to build it lol. Work has been so busy and working late has cut in on my play time lol. Me and my dad own a tire/mechanic shop so my work seems to never end lol.
I'm really digging my Capra so far. Running a Mamba micro with a 1500kv outrunner and a 12t pinion.
I've had mine for about 2 weeks. i've been using a revolver 540 v2 1800kv with the sidewinder 4. i absolutely love it. it runs great, has awesome low speed control, and tons of torque.
Hello from Fl. Thanks for the tips as my wife is building her first rc kit (Capra). Have a good idea of electronics now. God Bless Ya Dave & Tammy
Great video as always John! Awesome honest review of the Capra. Florida rip rap crawler here. We definitely have plenty of it. I find Hyrax to be a great tire on our rocks. Hope to one day get to shake your hand. Keep producing your awesome products! Maybe one day I can step up from the Trailmaster sport and get one of your higher end motors.
I am running the Ottsix KLR/m gold with chains in the Snow on my Axe. Took it out at the start of the blizzard the other day, by the time I was at my crawl spot there was an inch of snow on the ground. I climbed up a hill that on loose pack soil running the Hyrax Predators was a challenge this Fall, the Snowy Chained VooDoos climbed like it was on level ground, I was smiling ear to ear in surprise.
I like the Capra. Started with big power and 2.2 tires...changed to a Revolver 1800 kv , 11 tooth pinion and 1.9 in like it even better...all powered by Castle Mamba X ....I do like the self righting of the Capra ..you got to get the dig working you'll like the additional capabilities....I live in Tucson, AZ. Here we have a great deal of river rock in the low land in the desert areas great deal of jagged rocks hard on tires and cut them up pretty good...I did find Gens Ace Adventure 3600 and 4300 battery that will fit....I have been using a 1800 Protec battery I like it but with the 1800 kv it runs down quick...
Texas Crawler here. KLR voodoos are grat on smoother terrain, but the hyrax provide a little more clearance for the belly and high centers less. The Front wheel drive dig function helps lean it over.
Hey John,
In my Capra I’m running a 20t Crawlmaster Sport and a 10 tooth pinion on 3s and so far so great!
sounds like an excellent combo!
Seems a lot of guys are going for a 13T, but I think the 20T would be a better way to go for this rig. How is the 20T working out for ya?
Kent Vanderploeg, So far, so great! I actually have a brand new 13t CrawlMaster Expert that I could have used but I chose not to due to the stock gearing. With the stock gearing, 10t pinion and 20 turn motor it has plenty of wheel speed.
@@fight4uthisway Glad to hear it! I'm betting with the stock 14T it should still have plenty of wheel speed, but I'd rather be crawling. Wheel speed only for tricky spots.
G'day from Australia 🤟
I work in a quarry so I see rocks all day every day 😏. I have a scx10ii and a umg10 both very capable, next will definitely be a Capra, your video sold me so just waiting for it to come out over here👍
I don't own a Capra, but a buddy let me have a go on his today and I might just have to pick one up! Definitely an impressive rig.
convinced me to go ahead and pull the trigger on one.
BoomRacing Hustlers for me.
Your videos are exceptional. So glad I found you! Subbed! :)
From Maine and N.H border. I live on the edges of the White Mountain national forest. I cannot wait for the snow to melt to get on the rocks on the Saco river.
Central Montana guy here. Waiting for my Capra to show up. It’ll have Hyraxs to start with .225 SLW hubs on some VP Methods. I’ll be running a BXR ESC with a Reedy Radon 16T motor and a Shift RC servo.
Very informative review JRH, thanks for putting it out. I tried reaching out on FB messenger, but I have a sneaking suspicion you don't use that! Note on the Dig, you can install the spacer and lock the Dig without zip ties.
I don't use messenger normally. i"ll take a look and see if I can find
I don't know your "real" name, don't know what to look for
@@HolmesHobbies Matthew Kett
I recently installed HH motors in my nephew's trucks. A trailmaster sport / hw 1080 in the deadbolt and a 380 revolver / micro x crawler edition in the Barrage Gen 2. I have been running Tekin RX4 / Roc412 setups in my deadbolt and VS4-10. After getting my first taste of the HH motors, they will be my go to motors from now on. Now just have to wait for the Magnums to be back in stock.
We really had a run on magnums suddenly, what would normally last a few months got bought out in a week. Caught with my pants down, it will be a few months until we get more inventory.
@@HolmesHobbies May have to start with a 16T CM Expert if I can't wait for the Magnum. What do you suggest for motor timing?
tips for getting rid of the massive torque twist in the RTR version of the Capra?
Thanks John.. I'm a motor snob now!! 5 slot all the way!
Hello, i am from Belgium.
Il love Capra ! It Will be my next Crawler.
I have my own spot that i bild .
Thanks for your vidéos.
Olivier
I love your videos......great job man..
What Foams are you running with the VooDoos.
I tries some Stock foams from some Proline tires but I don't think they have enough volume for the Ottsix tire. Drove them in the Snow, and a couple days later noticed 2 tires had flat spotted. When I took the wheel apart and pulled the foams I noticed they were damp. I think the evaporating moisture was causing a vacuum and flattening the tire, because as soon as they were off the wheels they bounced right back to shape.
Behind the curve, was thinking of getting a Lasernut, but the drive train issues have me waiting. So i have decided to go for a Capra build then re-evaluate a rock racer in the Spring.
I bought mine yesterday n planing on putting my first holmes hobby electronics in it
How did that turn out?
this will most likely be my first crawler next spring, unless I get the new scx24 first to play with indoors this winter.
On the front I done the 13-22t by hot racing in the front portals ad a few more goodies on mine running everything else stock or than brass in the front also gonna put some in the rear but not as much. I have the blue/green rtr version. Love it so far
I'm here in South Florida. Yes we do have some rip rap here, mostly under bridges as you said. It's all good. Portals shine in the rip rap vs. a straight axle rig.
Yep :) Crawling riprap is still better than no crawling!
You would pop a blood vessel if you see what I do to these things.. I have a 30+ mph yeti and am looking to do the same with the Capra. Though the carpra looks like it will need quite a bit of modifications. But don't get it wrong I have crazy low end smooth torque as well for crawling where it needs to. Anyways, love the video, your a very knowledgeable fella just subbed. Thank you!
And yeah 2.2's look like it would definitely benefit this rig
That is an awesome paint job, looks great very professional.
What would you recommend for 2.2 tires? Have you changed your opinion since video?
Working on my build now and have the 1400kv revolver motor with a sw3. With some RC4WD wranglers with crawler innovations foams. love your motors I have a pile of 550 cans that i use in all my brushed builds.
Be sure to use the torque limit function on the sw3 for nice and slow startup.
how do you think this would perform with 2.2s? Or maybe the tall proline 1.9 boggers?
pretty good, probably need a little lower stance though
HolmesHobbies hey thanks for the reply brotha! Love the products and vids man. Thinking about getting the RTR version they just released. Looks like a great RTR seems to have all the same high quality components as the kit. Hopefully the days are gone where the RTR is a lesser product 👍🏻 same links shocks lights metal insert servo, everything. Keep up with the great work on the vids and products man.
I know this is months old, but I run the 1.9 boggers on mine and it's awesome!
Tim Needs A Hobby nice! Still appreciate the reply!
Florida here, definitely familiar with boulder crawling...the infamous “Sanford Bridge”.
I love my Capra! I pre-ordered through my LHS and ended up having to gut another rig to get this up and running. Out of the box it was very good. I swapped out shocks (100mm Desert Lizards w/50wt oil) and like how it sits (level links) and can articulate better than with the stock shocks. Still tuning and testing. I currently run Rock Beast 4.55, but have some Ottsix KLR/M in 4.75 on the way. I did go with an Axe 2300k (since that was in my other rig). I'll be replacing what I took with a Holmes motor (as I have in my other crawlers).
Hey John. I live in Overland Park, Kansas and I just realized that my new Capra RTR is super fun to drive in snow. I can't imagine how well it would do with 2.2s on it.
Just picked up a rtr Capra. Any suggestions on first mods ? Budget is not a problem
Tires: Hyrax Preds and TRX Canyons (cut, they're pretty good actually)
Rocks: Live in Phx, AZ. I've got some legit spots within a mile of my house.
Motor: 16t 540 (as of right now)
Work: Program and run 2 plasma tables and do R&D work for new products to help grow the business I work for.
running plasma tables sounds fun!
God damn his voice is soothing and easy to understand.
I would be really interested to see a comparison between the Capra and the RR10, since they have comparable ground clearance achieved through different design choices.
Hope you get a gate keeper would like to hear your thoughts
Any tips on that paint job ? Patten looks cool 😎
The dig is the best party trick though!
REALLY DIGGING THE CAPRA , AWESOME JOB AS ALWAYS BROTHER / FLORIDA HERE SPACE COAST AREA
great review, that paint scheme looks so good.
That rig is just too cool! Awesome video! I need to get one and check out Holmes Hobbies!!!👍😎👍
Planning to pick up some of those new Crawlmaster Sports!
Worth it.
Cincinnati, Ohio for most of our area , to get rocks involves creeks and such. Have to have a motor that can live in dirty waters.
Using an axe syatem in mine, but would like to go to a 3 gear system with the vader skid and hobbywing fusion to get the C of G lower. Right now there is simply too much weight sitting high up in my cab.
Trying to run 2.2s on my capra with potentially a brushed motor but open to other options. What do you recommend? I want high torque and controlled slow crawling as well
What do you think of the mamba x and the 1406 2280kv slate motor with a proteck 370tbl servo for an electronics set up.. any unforeseeable complications I am new to rc rock crawling and this is my first rig
We have quite a few good bridge base crawl sites here in PA not as sunny as Florida but then you are under a solid bridge :)
Hi john, I have a Capra with 55T and 10p , I am also using 2.2 tires with beadlock but the fome is from 1.9 wheels, That gives me more real look as a low pressure tire I like it , also I would like to set up my dig but I have no idea how to do it, Can you make a video and how to do that thank you and be safe
Very nice vehicle hope you have a video comparisson to RGT Rock Hammer
Great video 👍👍
Glad you enjoyed it
i have capra with crawlmaster pro 16 t would you leave stock pinion or go smaller
I would LOVE a Capra....
But as the broken record goes, I can't afford it. 😭 Someday hopefully.
Carmine ✈🚂🚙
Hi!
I wait for you opinion from a while...
What I don't like on this rig it's that fact you can't fit an 550 motor! Atherwais is awesome!
I like the Deep whods tires, especially 2,2 and I'm truck driver... From Spain.
Nice and informative video, like always, thank you!
Same here, wish a 550 would fit for lower cost performance with Sport motors, but it's such a compact rig that there is no way it could fit.
16T CM Pro with 12T pinion, HV500V2 & BRXL here. Trying PL BFG Krawler KX to start. Did go to a shorter internal spring shock. Def. curious about the firmware update. Great paint work!
What would be awesome would be some hh tire pattern rock crawler tires
Not sure if anyone has mentioned it, but I was able to get to a 9t pinion on my Capra. No cutting or hacking and can't be done with the stock motor. Motor needs to have holes next to one another.
X o
O (motor shaft)
X o
X=screws
So now my Capra is around 48-49:1. Hopefully the diagram translates in the comments. And the gear mesh is excellent.
Great video, Am a new sub. I have a Capra and it is amazing, I made a few videos of it for my channel and during those runs I have come to really like how it works. I think this may be Axial's best release in a long time. I have not found the width to be too much of a problem yet, but i have not had it in super tight spots.
Wow you got it all.!!!!!!
I'm currently running a hobbywing axe 2300 with the 14t pinion on a lihv 3s. My only complaint is the size of the axe esc. I love the power and the controllability is there for me.
The size of the esc doesn't bug me nearly as much as the size of the sensor wire plug, which is nearly as big.
Are the portals geared down also and if so is the final drive ratio with that included?
When I first seen the capra it blew me away how wide the stance was. Will you get the new Axial Ryft hill climber coming out? Have a great week! 😎👊🤘
I'm running an SC-10 scorpion still. Upgraded some from stock but nothing like these new rigs out of the box
will Crawl Master Pro 540 16T work good with capra rtr
Hey John, I think that you've said in the past that there is a 15-20% increase in power/torque going from the Crawlmaster Expert to the Pro. What is the power difference between the Sport and the Expert? Thank You!
about 50%, its the biggest jump within the brand lines going from sport to expert
@@HolmesHobbies thank you!
I had no idea all the levels of motors you offer, I just put on my first Holmes motor(30t expert). I like it alot, it has great low end control, but wanting a little more power/speed. Considering the revolver for my next option
Springhill Florida here
John, how can you isolate the voltage for the steering servo and dig servo? I'd like to run a bec for steering but wont that send the same voltage to the dig servo? Thx!!
I've got those same 3s 850mah Nano-Techs! LOL I swear to you, the most versatile battery around! They were on "special" so I grabbed a bunch. I've used those things for everything from a park flyer foamy, transmitter pack, 10th scale crawler, BEC pack on my non electric Losi etc etc. Just a perfect size and output to have around.
As for the Capra...meh, I don't know. I'm waiting around a bit. I'm sure I'll have one eventually, it's just not something I feel like paying "new release" dollars for. I have enough axles, transmissions, links, motors etc and chassis/cages lying around to build something similar in an afternoon. A piece of me wishes they did an SCX-10.3 type thing and take it to the TRX4, Gen8 etc. They need a newer, relevant trail rig. I don't think retrofitting portals to an SCX-10.2 is going to be enough.
Oh, and I'm in Southern New England - CT. Nothing but some of the most beautiful forested land with rock outcrops and granite ledge!
Im about a mile from horizon hobby, in Champaign, IL. It's hard to find more than 2 rocks close to one another around here... Missing Memphis and the river bottoms..
My family is from Champaign. Used to have the Holmes Angus farm there until Grandaddy Holmes passed.
Work at an agricultural lab in town. I would love to get on at horizon in the QA Dept. Here's hoping!! The first farm aid was here in Champaign!
Just got one! I'm pretty excited about this build. Any suggestions for a newbie like me? Much respect, i have a 16T holmes motor sport. I noticed you said to get a ten tooth pinion on the motor. I hit that sub botton! Cheers!
So like a bob Ross. I love it
The revolver works great in this rig!
Also very efficient. I get really good battery life on 3s.
John do you think adding extended wheelbase is messing with the geometry too much?
Mr holmes what size pinon should I run in my capra with the 16 turn crawlmaster? I might have missed you saying!
Is it me or dose this resemble the bomber maybe I don't have great detail eyes but other than portal axles.
First things first. Just want to let you know that I appreciate your knowledge and the time it take to put out good content. I'm thinking about getting an axial Capra kit but I want to put something brushless in it that can crawl smoothly at lower RPM but also have enough power to jump me over an obstacle if necessary. Is that possible? If so what would be the best ESC motor combo to pick up?
I’m a little late to the party, but I’m currently building a 4-wheel steer Capra. Probably going with a Crawlmaster Sport 540 16T.
I bought a new axial Capra and it was tore up right out of the box so I haven't got to play with it at all yet but I did get some new graphics on it and got some new parts on the way home so I'll be Twenty-One turn new steering servo I got two sets of 2.2 to go on it
If your running 2.2 wheels and tires. What motor ang pinion gear would you suggest? Thanks
How bad do you think a 2.2 5 3/4 tire set up would hurt it?
with a 10t pinion would be fine
Hi John what wheels do you on the capra? I like them