Super Satisfying Decorative Sign Carving and Epoxy Fill | Indianapolis Colts Wood Sign w/ CNC Router

This is a gift I made and I thought others might like to see the process in timelapse form. I carved the design using a CNC router and filled it with epoxy
Items used:
cnc router: amzn.to/3Nc9mpg
router bit: amzn.to/36EwnAc
finishing oil: amzn.to/3N9QSpk
Epoxy: amzn.to/3qnYXwX
Mica Powder (Epoxy Mix): amzn.to/36dDgcd
Song:
Unconditionally by Broken Elegance / brokenelegance Creative Commons - Attribution 3.0 Unported - CC BY 3.0 creativecommons.org/licenses/b... Music promoted by Audio Library • Unconditionally - Brok...
#cncrouter #woodworking #Epoxy

[@rogerharris1561]

Are you located in the Indianapolis area?

[@paulstrange8607]

Love it,
Is resin ok for outdoors

[@paulstrange8607]

Hi love your work but what sort of sandpaper are you using and what oil.
Thanks

[@erikcramer]

How come the wood and epoxy dont "bleed" did you prep it before ?

[@darrellsaturnbigfoot]

Not sure but did you just use a v carving bit to do the pockets ???

[@GonzaMX5]

What kind of wood did you use? Looks great

[@TechCreations]

Thank you! It's teak wood

[@katrinaobryan7531]

What is your sanding and finishing technique?

[@TechCreations]

I use an orbital sander starting with 40 grit sandpaper and incrementally work up to 200 grit. Then for the finishing I use odie's oil and buff it in

[@derekd289]

Did you use any other bit, or just the vbit.

[@TechCreations]

Just the vbit. It took a bit longer, but it was worth it for the convenience of not having to do a two step carve

[@derekd289]

@@TechCreations did you just set a final depth,ro keep it from Ving to the bottom

[@TechCreations]

@@derekd289 Yep! I set a max depth so once it hit that it just leveled out

[@nickwstp]

Why do you sand it off like that? Why not just use a flattening file design and shave 0.3 mm from the whole piece?