Also there is protective film over some of the gauges so make sure you peel those off. Also make sure you set your dip switch and your volts I had to call them to figure this out because I was not that knowledgeable on that
@@DentsideAddict84 I don’t think I one focused on that. I have the American auto wire harness so the wiring would have been different than the factory ford harness anyway.
Im doing a custom dash because when I bought my gauges they did not have this set. So is your truck 4x4? If so , can you tell me how you did the VSS. I cant get mine to go into my np205
ismael g was about $400. Which seemed high to be at the time but after I got it together I felt it was worth it. It’ll look great once it’s instilled. I’m also doing the American autowire harness update and the holly sniper kit.
Ray nice lmk how it goes!!. I’m currently doing rust repair almost done. Will be putting in an order on Friday for dash kit, wire harness and LED light all around
ismael g awesome 👍🏻 the new harness is a must in these trucks. I recommend the American autowire harness. Every wire is labeled and it’s pretty easy to install. You will have to build all your plugs and do a little soldering but it’s pretty easy. I’ll have a video up on that too once it’s done. Good luck on your project!
@@TheYaneus The a few leds went out in the temp gauge and the “brights” indicator light is annoyingly bright when it’s dark. Other than that it’s been great. I’m sure intellitronix would helped with the gauge issue but I didn’t want to take it all apart if they wanted me to send it back.
Great job on the update and video. The digital cluster looks amazing.
Also there is protective film over some of the gauges so make sure you peel those off. Also make sure you set your dip switch and your volts I had to call them to figure this out because I was not that knowledgeable on that
Just got mine 3 weeks later nice though 👍🏾👍🏾
I just got mine today .. they were out of stock. Make sure you order MPH if you are in the U.S
Can you make video to how to connect digital speedster cable
Because I’ve had my cluster for about 2 months but I haven’t installed it since I have no clue how to and I don’t wanna mess anything up
Dónde puedo conseguir de una f150 82?
Dose the gauge bezel come with it?
Looks good!
Who’s got an actual video of them installing and putting the wires together?
Juan I’ll cover that in my next video. Coming soon!
Ray thank you man, you are a life saver 🙏🏾
@@RustyRaysGaragedid you ever make a video installing it?
@@DentsideAddict84 I don’t think I one focused on that. I have the American auto wire harness so the wiring would have been different than the factory ford harness anyway.
@ I’m going to do the American auto wire as well. I’ll go watch that one!
Do you have the install videos
Im doing a custom dash because when I bought my gauges they did not have this set. So is your truck 4x4? If so , can you tell me how you did the VSS. I cant get mine to go into my np205
I am going to do this to my 79 f350. How much did it cost
ismael g was about $400. Which seemed high to be at the time but after I got it together I felt it was worth it. It’ll look great once it’s instilled. I’m also doing the American autowire harness update and the holly sniper kit.
Ray nice lmk how it goes!!. I’m currently doing rust repair almost done. Will be putting in an order on Friday for dash kit, wire harness and LED light all around
ismael g awesome 👍🏻 the new harness is a must in these trucks. I recommend the American autowire harness. Every wire is labeled and it’s pretty easy to install. You will have to build all your plugs and do a little soldering but it’s pretty easy. I’ll have a video up on that too once it’s done. Good luck on your project!
Nice part you have installed in you truck ready?
How does the speedometer work ?
It seems to work ok. Occasionally it seems to lag but only for a second.
@@RustyRaysGarage and how does it work and what's Your opinion after 2years ?
@@TheYaneus The a few leds went out in the temp gauge and the “brights” indicator light is annoyingly bright when it’s dark. Other than that it’s been great. I’m sure intellitronix would helped with the gauge issue but I didn’t want to take it all apart if they wanted me to send it back.
@@RustyRaysGarage Thanks for replying. Much appreciated.
Just installed it after looking for 5 months for someone to install it
And just realized it’s kph and Celsius 🤦🏽♂️