Hey Jem.., they are usually a pain when it gets to this stage .,, the centre spacers at this point has been completely obliterated and the top part of the DMF goes out of alignment and seizes itself together
@@WMCS Yes, I had a good idea that that was the problem when I saw the bolts out of alignment with the holes through to access them. I also noticed the small lift you gave the car, with the planks you used under the wheels to help with the lifting of the car, you know to reach the height you needed to stop having to use the jack, to then get the jack right under to the the most central position giving you the best point of lift at the sub-frame, right at the very end of the video, TOP TIP!! :)
Hi Kevin. Gave you a thumbs up. Do these motors also have a pilot ball bearing on the motor side, behind the flywheel, or it’s not the case here? If there is, they say it should also be replaced with this occasion. Also many would argue that since your at it, one should use the opportunity to also change the gasket on the crankshaft. What’s your take on this? Would very much appreciate a somewhat thorough answer. 10X.
3 year old video still doing its thing watched this on my first clutch change ever 4k miles since. ive changed most things that you have to take off before but other than the box and clutch i didnt have a clue about now doing one on a astra and tring to find out if i have to take sub frame out or not 🤣
No probs at all northernman..🍻🍻.,, I’ve been doing it for nearly 8 years now. The first 5 years I used to do two a day Monday to Saturday .,, but I had to start really early 05:00am and finish late about 07:00pm. Since I’m now in my mid 40’s I only do one a day Monday to Saturday., So I leave home about 08:00am and usually back by 2-3pm.., How about yourself. I take it you’re in the trade 🍻🍻🎄✨
Great video, and respect for doing this type of work on customer's driveways in the rain! What do you think of the DMF design? Do you avoid solid wheel replacements?
Carl I’ve told you this is where it’s at 😁😆.,, all the action is out here.,, a unit is for when I retire and drink cups of tea🎄✨🍺🍺.,, have a great Christmas and new year .,,
Just finished a complete clutch change on my 2008 Polo Cross 1.9 diesel using this video. Drove it and it works perfectly. Bought the clutch on Autodoc and paid 250€. Asked a workshop what they would charge me for a clutch change and they said around 1500€😳😳 So thanks man you are a true inspiration and make amazing videos with perfect angels.
Honestly. It was great reading your review. As that’s the main reason i shoot the videos. To help others with minimal skill to have a go. Glad it went well. 🍻🍻🍻
Best mechanic I ever seen in my life. That aside, Audi is my favorite vehicle and it ever will be but now I know that i did not made a mistake by buying A6 instead of A3, he had to dissasemble whole fucking vehicle to get to the clutch, what a shit to work on damn.
is that same type of job done on the 1.9 pd engine ? as i have got a leon mk1 pd150 also try AC90 its better than wd40 the same person who brought wd40 ages back owns action that do Ac90 have a look, good gear like there other products.
All the best fella, on the ground is 10 time's harder than using a 2 poster ramp, I been in the game 30 years and I wouldn't do it on the floor. Luckily you're power tooling mostly. Charge well your body won't last.
Another quality job Kev I’ve been using one of those clutch alignment tools for a good few years now they work every time nothing worse than struggling with a heavy box and having to put it down again because of miss alignment.
Dude you are a monster I did one flywheel on audi took me 4 week's no lie had all the tools every second bolt was troublesome getting in in was harder than getting it out now I never cleaned down like you did I like that extra touch what is in that spray bottle you use?
3 ปีที่แล้ว +1
You can review my garage page, your work is beautiful
wow! that clutch was in a bad state, great idea for getting at the bolts on the DMF, had a similar problem on a ford ranger, but luckily there was two of us, my mate managed to wrench the face plate around while I got the socket in to undo the bolts, a big problem on your own but you got round that easily. Brill job keep 'em coming...
Before I graduated onto the grinder. I used to hammer it back round with a chisel. It does move but about an hour of constant hammering. It’s always great to get feedbacks from someone that’s done the job and know what it’s like.
hey please i have a question on bloc engine its marked the bore cylinder class , for example "abac" can i use piston classe "B 71.98" if the cylinder classe "a 72.00" is worn but still in the limit of classe b lets say 72.02" ? the mix is possible ? cause the workshop says that if classe "a" exced the limit , rebore the cylinder 0.1 and use oversize 0.1 piston Cylinder "A" 72,00-72.01 /// Piston "A" 71,965-71,97 Cylinder "B" 72.01-72.02 /// Piston "B" 71,97-71,98 Cylinder "C" 72.02-72.03 /// Piston "C" 71,98-71,99 over size cylinder "A" 72.10-72.11 /// over size piston "A" 72,065-72,07 over size cylinder "B" 72.11-72.12 /// over size piston "B" 72,07-72,08 over size cylinder "C" 72.12-72.13 /// over size piston "C" 72,08-72,09
Innocuous observation but when I’m working on my car in the drive I have a creeper size mat that I lie on ,I’m always having to move around and shuffle about and it annoys me so much, never thought to just use garage flooring to cover the whole area.
Very good one! Our clutch ninja carves the stars to throw directly from a flywheel! Do these flywheels use to have that bad condition? I am impressed. Is it a kind of fuse? Thanks for the video!!!
Yes. The flywheel had turned from dual mass to solid and seized itself.,, it happens when the DMF goes and you carry on driving on it., if it goes off centre there’s a good chance the spinning force will crack the bell housing.
I have this car with same engine, my dmf is a little bit noisy when idling in neutral with clutch out, the clutch plates were replaced at one stage, but the mechanic never replaced the dmf when he was doing it, will it cause damage eventually? thanks
Fair play to you buddy. Hard enough job todo in a warm work shop with vehicle on lift an people too help. Nice to see a grinder with no guard on it being used . 10/10
@@WMCS ive built cars an motorcycles the last 35 years, never had a guard on a grinder in my life. No serious bodily injuries from it either, a few battle scars lol nothing super glue with reactor spray can't fix. I must say my days of working on the pavement like yourself are over. People have no idea the extra difficulties it creates. Ask new young mechanics todo a gearbox on the pavement and they will not even have axle stands. I did build myself a set of portable ramps that split in half for back of van. Lifts the vehicle up just under 3 feet level by using a trolly jack. Ive retired but have enough cars and bikes to tinker on round the house. Mostly my work was bodywork and fabrication along with paint. I find people try to haggle to much now, want the best mirror finish but are not willing to pay for the extra hours it takes. I am very impressed by the level of work you show while making videos also, thats impressive buddy as I'd get confused and mess things up lol
It was a still a nice repair. You know they’re my favourite them VAG gearboxes. 😁., I wouldn’t say anything bad about them ✨🍻😆.,, have a merry Christmas and great new year. Thanks for being a great support to the channel .,,
Another top job ive just asked milwaukee. Tools to send you a new impact gun as a good will gesture as in all your videos your promoting there tools and sales must of gone up 😀👍
I have an audi a3 tdi. Its 55 reg. The first gear doesn't go in smoothly. Does that mean the clutch on its way plus the clutch pedal is a bit stiff too
Awesome work, I always service my car and bike brakes etc, would love to be able to do clutch’s and cambelts etc, Just a bit of a big job and don’t have much space or time, but would like to do it 😀, anyway keep up the good work👍👍
Thst was a gnarly flywheel. Someone took the interpretation of "sports" to a new level.
One of life’s super mechanics! Seriously impressive.
Hello, kevin, I really appreciate you. Thank you so much for giving us these opportunities in this cold weather.
Glad you’re enjoying the videos. It is a bit cold out here. 😁💫
Excellent and clean Job , Kevin!! Also very well filmed.
Thank you for the feedback and for your support towards the channel.
I can tell this wasn't the first time. excellent job. subed
Thank you 🎄✨✨🍻
ah. so that's what a slipped flywheel looks like? great job! i keep learning a lot when i watch your videos. thanks a lot.
Hey Jem.., they are usually a pain when it gets to this stage .,, the centre spacers at this point has been completely obliterated and the top part of the DMF goes out of alignment and seizes itself together
@@WMCS Yes, I had a good idea that that was the problem when I saw the bolts out of alignment with the holes through to access them. I also noticed the small lift you gave the car, with the planks you used under the wheels to help with the lifting of the car, you know to reach the height you needed to stop having to use the jack, to then get the jack right under to the the most central position giving you the best point of lift at the sub-frame, right at the very end of the video, TOP TIP!! :)
Master.... gran operación gratituded por tus videos
Thanks
Excellent job man, I really salute you. Stay safe and well!!
✨🍺🍺🍺🍺🎄🎄
The best mechanic in UK ! Thanks for sharing ! Respect man ! Have a good day !
Shut up
Monster! What ever rain or snow or cold air..... Kevin-Albert Williams makes your clutch brand new at your home)
You got that one right ., I’ll even work in the dark if there’s enough coins in the gearbox..,, 🍻
Best video for clutch replacement
Hi Kevin. Gave you a thumbs up. Do these motors also have a pilot ball bearing on the motor side, behind the flywheel, or it’s not the case here? If there is, they say it should also be replaced with this occasion. Also many would argue that since your at it, one should use the opportunity to also change the gasket on the crankshaft. What’s your take on this? Would very much appreciate a somewhat thorough answer. 10X.
Pilot bearing is a bit of a thing from the past. If it still has one it’s usually pre mounted in the flywheel already.
Welcome back warrior !
😆✨🍻🎄🎉
3 year old video still doing its thing watched this on my first clutch change ever 4k miles since. ive changed most things that you have to take off before but other than the box and clutch i didnt have a clue about now doing one on a astra and tring to find out if i have to take sub frame out or not 🤣
Great work... Love it
Thanks.
Another top job 👍🏻
por favor busque un protector de dedos,queremos seguir viendole cambiar embragues a este ritmo.
un abrazo y muchas cervezas
Good jobs!
Est super tare frate .repar și la sprinter 2011🙋♂️👍
Mecanicul e roman?
Do you just specialise in clutches ? How many one average do you do in a week ? Sorry for the questions I admire your work my friend.
No probs at all northernman..🍻🍻.,,
I’ve been doing it for nearly 8 years now. The first 5 years I used to do two a day Monday to Saturday .,, but I had to start really early 05:00am and finish late about 07:00pm.
Since I’m now in my mid 40’s I only do one a day Monday to Saturday.,
So I leave home about 08:00am and usually back by 2-3pm..,
How about yourself. I take it you’re in the trade 🍻🍻🎄✨
What’s your most hated 2 cars to work on? Like the problem cars 😂 or the always hard clutches to change/get into?
I don’t really look forward to mini R53 S at all.., 🍻😁
@@WMCS 😂 extra 530 just for the mention of it.. what’s the easiest for you a transit or that?
very good
Great video, and respect for doing this type of work on customer's driveways in the rain! What do you think of the DMF design? Do you avoid solid wheel replacements?
Top
Hello Friend! Place your wheels under the sills for insurance!
Thank you ✨✨🍻🎄
Thats why he uses 2 pairs of axle stands.
Shit conditions albert mucker keep tellin ya get a unit winters here
Carl I’ve told you this is where it’s at 😁😆.,, all the action is out here.,, a unit is for when I retire and drink cups of tea🎄✨🍺🍺.,, have a great Christmas and new year .,,
@@WMCS ok albert but dont say i didnt try to convince you your mint at your job mate you know best you too have a great xmas
Why cut the flywheel like that ?
I suppose the emotional cut didn’t work. So I had to resort to a mechanical ⚙️ one ☝️🎄✨🍻😁
How many clutches do you do a day!
Just one a day.
GREAT GOP
Someone know how can i take out the drive shaft of the tucson ?
The one of right side
how long does it take to fit the clutch?
ti invidio per la forza che tu hai................................
Hi Kev, not really a bad day for December, I've thought several times about buying one of these, what do you think?
Just finished a complete clutch change on my 2008 Polo Cross 1.9 diesel using this video. Drove it and it works perfectly. Bought the clutch on Autodoc and paid 250€. Asked a workshop what they would charge me for a clutch change and they said around 1500€😳😳 So thanks man you are a true inspiration and make amazing videos with perfect angels.
Honestly. It was great reading your review. As that’s the main reason i shoot the videos. To help others with minimal skill to have a go. Glad it went well. 🍻🍻🍻
Work outside with my power tools never thought of the bag over them when wet ,good hack 👍
It definitely works. A bit of duct tape keeps it all together.,
hola kit es de 228mm y28 diendes shach para audi a3 8p 1.9 105cv ....puedes poner otro de 230 mmy 28 dientes de misma marca shach??
Looking at your videos is like watching satisfying video ahahah. I can't stop!
Best mechanic I ever seen in my life. That aside, Audi is my favorite vehicle and it ever will be but now I know that i did not made a mistake by buying A6 instead of A3, he had to dissasemble whole fucking vehicle to get to the clutch, what a shit to work on damn.
Красиво, чётко
not easy when whatch the video i Was tired
is that same type of job done on the 1.9 pd engine ? as i have got a leon mk1 pd150 also try AC90 its better than wd40 the same person who brought wd40 ages back owns action that do Ac90 have a look, good gear like there other products.
All the best fella, on the ground is 10 time's harder than using a 2 poster ramp, I been in the game 30 years and I wouldn't do it on the floor. Luckily you're power tooling mostly. Charge well your body won't last.
Another quality job Kev I’ve been using one of those clutch alignment tools for a good few years now they work every time nothing worse than struggling with a heavy box and having to put it down again because of miss alignment.
That’s right. It has to be a home run on the first go.,, otherwise it starts turning into a bit of a faff..😁🎄✨✨🍻🍻
Dude you are a monster I did one flywheel on audi took me 4 week's no lie had all the tools every second bolt was troublesome getting in in was harder than getting it out now I never cleaned down like you did I like that extra touch what is in that spray bottle you use?
You can review my garage page, your work is beautiful
What you save on fuel with diesel engines you lose twice on expensive repairs
very good tutorial i will do the same on my 2009 audi a3 sportback
Let us know how you get on.
This guy is seriously talented. Respect
How to tightly tighten two mass bolts? With an impact wrench I am afraid that I will twist
wow! that clutch was in a bad state, great idea for getting at the bolts on the DMF, had a similar problem on a ford ranger, but luckily there was two of us, my mate managed to wrench the face plate around while I got the socket in to undo the bolts, a big problem on your own but you got round that easily. Brill job keep 'em coming...
Before I graduated onto the grinder. I used to hammer it back round with a chisel. It does move but about an hour of constant hammering.
It’s always great to get feedbacks from someone that’s done the job and know what it’s like.
hello, when are you making a video with audi a4 b8 2.0tdi? please
hey please i have a question on bloc engine its marked the bore cylinder class , for example "abac" can i use piston classe "B 71.98" if the cylinder classe "a 72.00" is worn but still in the limit of classe b lets say 72.02" ? the mix is possible ? cause the workshop says that if classe "a" exced the limit , rebore the cylinder 0.1 and use oversize 0.1 piston
Cylinder "A" 72,00-72.01 /// Piston "A" 71,965-71,97
Cylinder "B" 72.01-72.02 /// Piston "B" 71,97-71,98
Cylinder "C" 72.02-72.03 /// Piston "C" 71,98-71,99
over size cylinder "A" 72.10-72.11 /// over size piston "A" 72,065-72,07
over size cylinder "B" 72.11-72.12 /// over size piston "B" 72,07-72,08
over size cylinder "C" 72.12-72.13 /// over size piston "C" 72,08-72,09
Ouff..🥸🤩
@@WMCS lol 😩
Innocuous observation but when I’m working on my car in the drive I have a creeper size mat that I lie on ,I’m always having to move around and shuffle about and it annoys me so much, never thought to just use garage flooring to cover the whole area.
It works really nice. I wouldn’t be able to do all that using a creeper. ✨🍻🍻🎉🎄
Very good one! Our clutch ninja carves the stars to throw directly from a flywheel! Do these flywheels use to have that bad condition? I am impressed. Is it a kind of fuse? Thanks for the video!!!
Yes. The flywheel had turned from dual mass to solid and seized itself.,, it happens when the DMF goes and you carry on driving on it., if it goes off centre there’s a good chance the spinning force will crack the bell housing.
See you had the experience there to go steady with the nuts under the ball joint... Go in to hard and you'll snap them off
Max and lots of WD40. They snap if you look at them the wrong way 😁🎄✨🍻
@@WMCS been there, snapped that haha
Hola amigo me gusta tu video un saludo de madrid un video con bmw f30 amigo
Hello! Very good videos!! Only one remark.. Why don't you show us the oil refill of the gearbox?
That was it in the syringe 💉😆✨
It's because of watching your videos that I learned how to change my clutch on my vw. You are "clutch".
Excellent
I have this car with same engine, my dmf is a little bit noisy when idling in neutral with clutch out, the clutch plates were replaced at one stage, but the mechanic never replaced the dmf when he was doing it, will it cause damage eventually? thanks
Just replace it
I think you forgot to bleed the clucht, Kevin.! Correct me if I"m wrong. :):):)
Yes you’re wrong .,, it’s a sealed unit ., unless you’re releasing the pressure then there’s no need to mess around with it.
This is Good Mechanic Changing Clutch By Itself With Simple Tools I like to ow How Much you Charge ??
For price
www.williamsmobileclutch.co.uk
he is so respectly to cleaning to old place of parts good works
What cleaner do you use in the pressure sprayer? Great videos. No pointless background tracks other than the impact gun
It’s brake cleaner. But any solvent works just as good.
Hello please what is the price to change the clhutc for Audi A3 8 pa 1.9 tdi 2009
www.williamsmobileclutch.co.uk
Muy buen trabajo como siempre. Estoy impaciente esperando un Astra h 1.7 cdti.
Un saludo
✨🎄🍺🍺🍺🍺
Fair play to you buddy. Hard enough job todo in a warm work shop with vehicle on lift an people too help. Nice to see a grinder with no guard on it being used . 10/10
😆., I like the bit about the grinder with no guard. You spotted that alright 🍻
Stay tuned for this week’s upcoming video.
@@WMCS ive built cars an motorcycles the last 35 years, never had a guard on a grinder in my life. No serious bodily injuries from it either, a few battle scars lol nothing super glue with reactor spray can't fix. I must say my days of working on the pavement like yourself are over. People have no idea the extra difficulties it creates. Ask new young mechanics todo a gearbox on the pavement and they will not even have axle stands. I did build myself a set of portable ramps that split in half for back of van. Lifts the vehicle up just under 3 feet level by using a trolly jack. Ive retired but have enough cars and bikes to tinker on round the house. Mostly my work was bodywork and fabrication along with paint. I find people try to haggle to much now, want the best mirror finish but are not willing to pay for the extra hours it takes.
I am very impressed by the level of work you show while making videos also, thats impressive buddy as I'd get confused and mess things up lol
Great job…what a ball ache to change,it’s going to cost me a fortune….
Send it my way 😁🍻
I changed mine and now pedal gets stuck to the floor any ideas?
Bleed the system. Or worst case scenario. A faulty slave/master cylinder
Hi Kevin another fine and reliable DMF for you to do, you have got to luv them lol 😂 , big thumbs up buddy 👍👍🎄🎄
It was a still a nice repair. You know they’re my favourite them VAG gearboxes. 😁., I wouldn’t say anything bad about them ✨🍻😆.,, have a merry Christmas and great new year. Thanks for being a great support to the channel .,,
always happy to support one of the best channels on youtube buddy, have a merry Christmas and a great new year 👌
Man your impact gun looks poorly ha
잘보고 갑니다 수고하셨어요
This video solved many queries. Thanks!
this men disassemble car like toy ^^ good job from france , you are the best
Thanks for the feedback. Stay tuned for the Peugeot expert video this week.
Nice job as always Kev, I knew as soon as you tried to move that flywheel that the dual mass was locked up. What an pain the a***
Honestly mate., I’m so glad it was a VAG engine that I had to cut that out. Any French cars it would have been a murderous challenge 😆😁🎄🎄✨🍻
@@WMCS very interesting🤔. I haven’t seen that happen before. Why would it be worse on a french car may I ask?
Modern cars.Hats off working outside in the winter you the man.
I love it out here. This is where it’s at 😆💫✨🍺🍺🍺🎄🎄
Another top job ive just asked milwaukee. Tools to send you a new impact gun as a good will gesture as in all your videos your promoting there tools and sales must of gone up 😀👍
Thanks Steve .,, I’ll let you know if I ever hear back from any of them .,, that’s such a nice for you do.,, 🎉🎉🎄☺️🍻
@@WMCS I’ll do the same 👍🏼
@@WMCS no probs still waiting for the skoda octavia 2.0 mk111 its getting closer to xmas lol 🤔
What kind of grease he uses at 42:00 min?
I have an audi a3 tdi. Its 55 reg. The first gear doesn't go in smoothly. Does that mean the clutch on its way plus the clutch pedal is a bit stiff too
so good but why remove inside in joints u dont need to remove that
Otherwise the flange will anchor itself at the back of the flywheel and may cause a lot of hassle in getting the gearbox out.
every part great respect and even in the rain
🎄✨🍺🍺🍺
Gave up working in the rain years ago bad for the bones
I love it I do. 😁
First comment 😂 top job kev again
Great vídeo no Bull #&%@ no music no blablabla 👍
Thanks for supporting the channel Xman.
C quoi ce liquide dans la buvette?
Bravissimo 👏, sei un vero meccanico 👨🔧
Świetna robota :)
Top job its like watching a robot he never stops ....
🎄🎉😁✨🍻.,, all within a few hours. Gotta get back to pick kids up after school 🏫
I wish this would have been with commentary. Still great work and keep it up m8.
Very hardworking man 💪💪💪
Love u videos I just subscribed u quality of work is very good u r one very good macanic take care stay safe
Very good film, could learn a lot. Once I changed the gearbox but never the clutch..I like your floor cover.
Awesome work, I always service my car and bike brakes etc, would love to be able to do clutch’s and cambelts etc,
Just a bit of a big job and don’t have much space or time, but would like to do it 😀, anyway keep up the good work👍👍
Thank you Ricardo. I enjoy it very much that I keep going for more.
whats the most clutches youve done in a day?
No more than two a day. I’ve cut back to one a day now. I think I’ve nailed that work vs life balance.
Running a cutoff wheel without the protector boot is very dangerous.
زاعيم الزعماء
Hi Kevin fantastic job all the best Shaun
Hey Shaun.,, thanks and merry Christmas 🎄
2:43 why there is a hole? what can be accesed there?
That’s to access the back panel in case it needs to come out to replace end bearing from main shaft. Great idea
Great job my respect
Nice and quiet working space again Kevin !
It was a nice place this one. Very suburban 😁✨🎄🍻🍻
Sei una potenza..Top