DIY TURBO $1000 Miata Kit Complete!! SUPER CLEAN
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- I'm building a daily turbo miata with ac and ps. Im doing an over the top intercooler setup. The thing is tiny and cute. We finish a custom downpipe and full 2.5" exhaust and hear it run.
MY WELDERS:
usaweld.com/?r...
*USE CODE: VASILY5% for 5% off your next order*
Thanks for watching!!!
main channel: / vasilycustombuildsandmore
instagram: / vasilybuilds
Never seen a cam lock like that before great idea 💡
High idle could be the breather lines, send the rocker cover to a catch can and let it vent to atmosphere then block the breather ports on the inlet manifold. Also once the megasquirt is on you should be able to delete the MAF and run it on speed-density
You should have Brent from PFI tune it !!!!
Maybe Brent can help tune the new build!? 🚀🚀
I would delete the lower section of the cam cover too... Great job! You're very talented, keep up the good work 👍
CONTINUE THIS SERIES PLEASE!!!!!!
Looking awesome!
Great job brother. I think u gotta put oil change. #peace
Man that valve cover turned out awesome, motor looks a whole lot better cleaner hahaha. I'm already putting my vote in for hyper blue or electric blue or whatever you call it. For the color of the car when Mark paints it. I'm very impressed with how much skill you have taught yourself. You must have a very high IQ. God bless brother
I was thinking on doing what you did with the mixing manifold and have the coolant return from the heater core to turbo to manifold. The only problem with that is that the turbo coolant fittings seem too small... i could also just do what you did and route heater out of the way. Main reason i want to do it is to clean up a bit and not have exhaust manifold heat on the coolant
Looks great!!
Can hardly wait for the build test.Yes,those open ports in the intake are a big part of the vacuum problem.You do need 1 small line from the to the 'blow-off valve' unless you're doing 'spring pressure open' only for now,which is fine.You aren't trying for 600hp.I think you did well.Brent at PFI certainly could tune it for you.Colorado's a drive for that though,and you don't have a special engine control system,so save the $ and find local.
Cool stuff! You should bring this up to the tail of the dragon for MATG! Great road and it's a hell of a time with hundreds of miatas
When I did my miata timing belt i ended up replacing the idler pully and that made the vehicle idle easier and with less effort in theory so just turn the idle screw to get the right idle
For the Algo...
And a Reply.
The wrinkle paint on the valve cover looks nice. I might have to do that on my car.
Dude it looks sick good work my friend
cover your cam belt because you will chew out the belt in time with dirt and chew out he seals as well it is covered for a reason you will halve your belt life so cover it and good vid
i hope the motor can take the top end strain from the turbo and the crank as well and the rings to
Everything you touch just comes on to life! Nice build man! 😎👌 Will you be taking it to import alliance this month?!
No to soon
@@vasilysgarage Gotcha, idk if my ride will be ready by then either. May try to make it to Hot Import Nights though.
I feel you welding exhaust on your back. I've done it a 1/2 dozen times and it always sucks.
Nice 😍
@@vasilysgarage Chris could you weld the 1/2” oil hole on the turbo and drill & tap it for the 7/16 fitting you have ???
@@denniskoop8018I thought of it but then realized the turbo housing is cast iron and it doesn't weld. Also it would clog the journal bearings
One popular automotive TH-cam channel doesn’t recommend Maxpeeding Rods. I don’t remember who.
will we get an update bro ?
Aren't you worried about chips in the oil pan. Oil pick up has a screen, but still a little risky. Also how heavy was the pan? Was it cast or thin stamped sheet metal
Cast aluminum
Off topic question, How have you managed to keep your old 18v dewalt batteries going? I have some that wont take charge, I keep telling myself im going to rebuild them "one of these days"
Im not familiar with the 2JZ mod, though it does add a neat look are you concerned of something falling inside the timing case?
I throw them away and buy new ones
Dyno tune?
Update?
Excuse me, but why doesn't this fit into the other channel?
It's mechanical, it's modifying stock to something better, and thats not so different from what you do on the other channel.
I mean everyone grows up, and they evolve into bigger faster builds, be no different than playing city, and school baseball to the college level as an example.
Your viewers, are doing the same if they're not already older, and some of us probably old enough to be your parents parents.
We appreciate what you're capable of achieving, and the younger one's will get plenty of the normal builds that you do as regular content.
Besides the welding, and engine work on the Suzuki really are more inline with the adding a turbo to your Miata if you think about it.
Plus even at my age, I wasn't satisfied with how well my lawn tractor preformed, are how wasn't able to go where I needed it to go.
So exhaust modifications were done, as well as air filter also upgraded, and even dumped the turf tires for tractor lugs on all four corners.
I've still got some improvements in mind yet to come, but like everyone else it takes time, and money to do these things.
Plus something I learned long ago, if you change a bunch of things at once.
How do you know how much each change did to improve to reach your goals.
Because something my actually cost you in more loss in some areas, and only marginally gained in another.
End goal is to improve it all the way around for a machine better suited for what you need, and are want.
So you confused me with the reasoning behind not doing this on the other channel, but then I'm old man, and easily confused these days.
Either way enjoy your channels, and the snowmobile engine powered mower was a great series in my opinion, and I bet it's a blast to ride.
Slicks, roll bar, and wheelie bar would be a good time for sure.
Although setting it up to road race would be equally a blast too I'll bet.
See old men still enjoy such things too, only difference is what we once could do, now we dream about, and watch younger one's actually do it nowadays.
Stay safe and be well
I forgot to say on my last post don't forget to stock up on food, go Brandon
“Clean”
And to think for roughly $6-700 you could have just LS swapped her and then you'd really have some funn!!!
It's not 700 it's 10k
People have broken the costs down and to do it right that's the price
Dude what's up with the 80s Scarface music
I'm to young to know lol
@@vasilysgarage keep up the good work you're doing an awesome job man
@@That1E_K1129 thanks for supporting!
Do you fabricate stuff for people?….if so I need your services
𝔭𝔯𝔬𝔪𝔬𝔰𝔪 😥