What's In My Tool Bag? (Tool Bag Tour)
ฝัง
- เผยแพร่เมื่อ 18 ม.ค. 2020
- TOOL BAG PDF (Download): bit.ly/38y5n0T
TUP NEWSLETTER SIGN-UP! bit.ly/2K4Aebz
THE URBAN PREPPER:
Amazon Video: www.amazon.com/dp/B07RB9HM7H
Facebook (Like): GotPreps
Twitter: / gotpreps
Instagram: instagr.am/TheUrbanPrepper
Bitchute: www.bitchute.com/channel/theu...
Minds: www.minds.com/theurbanprepper
Gab: gab.ai/theurbanprepper
WATCH MORE URBAN PREPPER:
Product Reviews: goo.gl/1A242o
Popular Videos: goo.gl/CdCsbL
Preparation Videos: goo.gl/HFaCkE
Altoids Kits: goo.gl/rQKRfv
Bug Out Bag Videos: goo.gl/wXASY9
EDC Videos: goo.gl/8Jqekb
The whole dirty tool is a used tool is a myth... I have tools that my dad gave me (retired machinist) that are 40+ years old... I have tools that I've used for 20+ years, all Anerican /German /Japanese made and if you were to see them they look new... because I clean and maintain them after I use them. If a handle comes off I replace the handle.... there's no reason you're tools should look bad. Take care of them and they will last and look good for as long has you have them.
I take care of my shit, My shit stays clean. I dont go dropping or tossing my shit, I take care of my stuff and keep it looking good.
Buy quality and take care of them, they last a long time!
I've used the same Klein needle nose, and Klein's for 6 years now. They're discolored and the comfort grip handles have hardened. I don't abuse them, I keep them clean, but they still have a very "Worn" Aesthetic to them. They should not look like new.
@@meta5234fax I use my linemen’s and 10-1 everyday and they not be super dirty but you see the wear and tear all we can maintain is rust and clean it off so they work and feel new but they defo don’t look new
Good video, good lay-out.
Tip: it does not matter where your tools come from as long it's good quallity. Keep your tools dry and clean your tools and bag. I keep a brush and a rag in it. It will last a way longer.
Thank you for watching this video! It took me 6 years to make, so it feels really good to finally show it to you, the audience. Here's the PDF document for this video: bit.ly/38y5n0T A couple of notes based on recent comments: 1) I will definitely have my grandpa's chisel resharpened rather than replaced, 2) I'll be adding many of the suggestions listed (e.g., safety glasses, Knipex pliers wrench), 3) You can still find good tools that are made in China (e.g., purchased at Harbor Freight, Home Depot). I just like these tools (USA, Germany, etc.) in my redesigned tool bag better. I still have all of my old tools, but I've re-purposed them to other various prepping kits. Cheers! ~Cliff
Link doesn’t work
A few things to consider...
Wire brush, can be a smallish one.
Vernier caliper, a small one is handy
Small torch, fire is your friend sometimes.
Also toss a few silica gel packets in there to reduce moisture, free and easy to obtain.
Gorilla glue offers CA with a combo brush tip/squeeze bottle, great for quick repairs ( and small cuts)
Very impressive set of tools. One thing I keep in mine is a thin roll of painters tape in case I need to stick a template or whatever on the wall and don't want to mar the paint.
Thanks for watching! Great tip on the tape!
7:01 The interesting thing about that set of hex keys is that the long end has that kind of "ball point" that allows the user to (un)screw hex screws at an angle - you don't need to be at around 90° to the surface in order to be able to use the screwdriver.
Take a shot every time he says "made in the USA"
LOL!! 'Merica! 🇺🇸
I'm fuckin drunk
😅
You could save some weight if you just carried a Kline 11 in 1. Has 2 size philips 2 size slotted driver 2 Robinson and 2 torx a 1/4, 3/16, 3/8 nut driver all in one.
Also pick up a malco flip driver. It’s 1/4 and 5/16 all in one.
U should definitely get a multimeter. It’s very good to know how to use and a good backup for the non contact tester you have. I have seen those non contact testers give a bad reading when the batteries are low.
To anyone else wanting to do this don’t worry about made in America. Just find a decent brand and go with it. Kobalt and huskey are great and come with life time warranties and last a long time.
I agree!
Agreed on that Klein 11 n 1. Love mine. Super useful and saves space. Plus you can tailor the bits to your bits as they sell different types.
Now you're 25% ready to do many completely unrelated things: house framing, auto repair, basic woodworking, electrical diagnostics, plumbing.
The problem I have with these 'catch-all' kits is they're generally overkill for assembling IKEA furniture and incomplete for a more specialized task, which requires its own separate dedicated kit.
Glad someone said it
Thank you! So true
Yup.
Just what I was thinking. Buying "the best" but for what? It's only by using tools yourself that you learn which are better or worse than others for your purposes.
I get some of what you're saying with this, but a homeowner could have to do any of these things. Tools are expensive. If it's not your full job, why rebuy things like wrenches that work for plumbing, furniture, and auto maintenance when you could keep them all in the "basic" kit that gets augmented with more specialized tool kits for each job? There is some stuff in there that isn't really fit for a generic kit, but there is the right stuff there to fix a bunch of small things or know why something is too big for just you to fix.
8:55 I believe you can have the chisel sharpened to remove those dents to the cutting edge - would probably need to be someone who knows how to sharpen chisels, in order to preserve the correct angle.
Wow, that's a solid tool set! Thanks for the taking time to showcase your tools, and to create a pdf to go with. Incredible!
My dear friend, *that Chisel just needs a bunch of elbow grease to be restored into full function.* Mainly needing a good grinding stone set ... if you check the back of the Chisel, you will see that the color of steel changes about half to 3/4 an inch from the cutting side. This is because there are two types of steel in there. The tip is a hard type of steel (half to 3/4) and the rest is a softer type steel. This was designed in such a way to reduce the use of the more expensive type hard steel, and to increase usability (mainly discomfort due to vibration) by the use of the softer type steel (though this last bit may also be a bunch of marketing BS, and it may all just be down to economics... anyway, YOU CAN sharpen that tool (and thus take out this nicks) until all that hard steel is gone. Other then that it could probably do with a bit of polishing agent on an old rag, to polish of some of that rust. Then take a very fine sanding paper and sand the handle (if you want to, because currently there is probably even some DNA from your grandfather on there), then use linseed oil to treat the wood! ... Lastly, make a wooden, or get a 'plastic' mallet to work that chisel, DO NOT USE a Metal Hammer on that wooden handle, as it will just wreck it !!! ... Please, for the love of old vintage tools and your grandfathers sense of buying a quality tool, restore it and use it (also use it with common sense, it's to work wood without nails) !! There are probably still 3 generations on that Chisel before some offspring in the future will figure out they used that last bit of hardened steel.
Thank you so much for taking the time to share the items in your tool bag, I really appreciate the PDF file which I downloaded for reference. As always, your videos are very comprehensive and professionally done.
Suggest the knipex pliers wrench. Replaces crescent wrenches and can be 3” up to 12”
I'd say the same. I've never had a good experience with adjustable spanners yet my Knipex more or less replaced a full set of proper spanners.
The multimeter comes in handy when you need to test your car battery. I also use one whenever I’m changing light fixtures, outlets, and switches just to make sure it’s not live even after the breaker has been cut off. That’s probably one of the tools I use the most. My dad gave me a Fluke brand meter over 20 years ago, and I still use it.
I know you wear glasses, but the most important thing i missed is some safety glasses !
If this message saves even at least one eye am ok with that but i'd like everyone to know and listen to our call. Wear safety goggles/glasses. Protect your eyes. I had some mix of oil and mud drop on my eyeball from under an old car. And let me tell ya. I thought I lost an eye fellas. I was heartbroken, mad, shitless scared panicked. Am in my early 30's got a lot of life to live still so I wear them as much as I hate them I love my eyes more
You need to try Milwaukee sharpies love them
True that I love those sharpies they don't gunk up like regular sharpies when I'm marking pipe to cut and where I make bends, or marking dusty drywall where boxes and fixtures are supposed to be. They are literally the best.
Thank you UrbanPrepper for taking the time and effort for uploading this video and creating a "go-by" list of the content of your bag along with comments. May God bless you and your family, Happy New Year, Ciao, L
You were very welcome! Thank you for watching.
wrap your files in paper to keep them from rubbing together. to keep them sharp
Great pro tip! Thanks! I still need to add handles to them.
Totally unnecessary, just more garbage floating around the bag
That’s not how it works. Two metals of the same hardness will not touch the other.
Please also add the following to your tool bag : Teflon tape, rubber washers & rubber o- rings, basin wrench, wrench for removing shower valves located in shower walls. Safety goggles or glasses, pencil type soldering iron & solder, propane or butane torch & solder for plumbing, PVC cleaner & PVC glue ,for repairing PVC pipes . thanks for great video 😀😀😀😀
I think at that point just have a second tool bag for plumbing. Or two smaller, 1 for plumbing and 1 for soldering
Great vid. Love the tool selection & toolbag. Thank you for making this video. Couple of tips to pass along. The Klein strippers: there are 2 types. 1 for solid wire & another for stranded. Also, each has diff set of calibrated gauge stripping. For electrical tape, never go cheap with off brand as it will not hold. Use 3M Scotch. Excellent. Finally, collect delicate small tools like dental pick or crotchet needle for maneuvering wires. Get Tie-wraps/Zip ties. I used Craftsman tools all my life. Love them. They unfortunately don't fit other brands for ratchet set. I will be rebuilding my toolkit from ground up soon. I now have a great point of reference thanks to you.
What a great video. I could not agree more. I have been doing the EXACT SAME THING you have re supplying my cheaply made tools. I have gotten to the point where i have every hand and power tool an average homeowner could ever want. (plumbing, basic carpentry, electrical HVAC)
The vintage tools would be my favorite and I would not want to replace them....especially if used by my dad or family members. You are lucky to have them.
I recommend the Knipex Pliers Wrench. I have the mini in my carry tool kit and also have the 10 inch at home. But with the mini I was able to change an entire sink with just that one tool. I was super impressed with it. Its like the Cobras you have, and adjusts the same way, but it has the jaws of an adjustable wrench for working with nuts and bolts that you don't want to chew up with the serrated jaws of the Cobras. Irwin Vice Grips makes a version of the Knipex Cobras that are nearly as good as the Knipex and much less money.
Thanks for the tips!
Nice! The bag might be my fav item. The open design puts almost everything in an easy to see position.
Yeah. I really like the design too. Unfortunately, I think Husky updated the design of this size and made it worse.
Bummer. Maybe Lowes' Kobalt brand has a good one.
As a tradesman and total tool nut I can tell you that you made great choices here. You really do get what you pay for especially with hand tools like those.
Don't totally rule out cheap tools though! In theory I'm with you on buying the best and supporting US companies, and I've spent more to get a lot of nice things... but I'll be real with you, I've bought a lot of Harbor Freight & Northern Tool brand stuff over the years. I haven't really regretted it either. They have warranties for a reason and sometimes buying the cheap version of something has gotten me exactly where I needed to be. Usually if it's something I'm reaching for a lot and I feel I could do better I'll upgrade and pass it on free or cheap to someone starting out. A lot of times though I just end up with perfectly good, serviceable stuff for years and never need to upgrade, especially for a seldomly used tool.
Oh and besides it totally pays to have some tough but not all that nice stuff that's kinda separate that you just wail on! (every tool bag needs a couple of ugly old flathead screwdrivers that you use for everything BUT screws.)
Great comment! He made excellent choices..I agree. I seldom throw away or discard any hand tool. Just make up separate tool kits for my vehicles, gym bag, work kit...etc. But one tool I didn't see..that I use ALL THE TIME is a Hyde 6 in 1 Painters Tool..preferably the Stainless Steel one...guaranteed forever and made in Canada. Although I've still got and use the base model high carbon steel Hyde painters tool purchased over 30 years ago. Got Hyde's basic steel Glass Scraper in my go to bag too. He could use a couple of 3/8" wobble socket extensions too. In that size EDC tool bag a ball pein hammer no larger than 16oz (and I cut several inches off the hardwood handle) has served me better than a carpenter's hammer.
Enjoyed your tool bag video. Nothing like good quality made tools!! Thanks for sharing.
That ratchet set from Japan is actually a very good one, also if you get screwdrivers with a hex-nut on them it allows you to use a spanner on your driver for extra torque on the driver.
Another great video sir. Seriously love it.
Thanks a bunch, Walter!
Those are some excellent suggestions. I've been toting a tool bag around for 20 years, and every tool you have in your bag is in my bag too. My only suggestion is once a year, shoot an updated video of your tool bag tour so we can see how it evolves. Keep up the good work. Thank you so much.
I’ve been in the hvac trade for over 25 yrs. Starting out, I bought a full set of low quality tools. After a few years I moved on to decent quality tools. Late in my career I finally began buying the good stuff. Your setup is almost identical to mine. It makes the work easier and less frustrating. I could even say the work becomes enjoyable. Through the years I’ve wasted thousands of dollars upgrading my tools. I wish I had the sense you have to purchase good tools the first time around. Great vid!👍🏼
Thank you for the video very helpful as I begin to prep
So glad to hear it took you 6 years. After my mother died I bought over the house and I've been trying to renovate it for over 2 years now. I have a pretty impressive selection of tools but still finding jobs that require more specialist tools. I'm only 23 and have no trade experience but hearing how long it realistically takes has put my mind somewhat at ease. Cant quite afford it anymore since I was left unemployed through lockdowns. Thanks for your help!
Heads up.
Times will be better. Maybe the skulls you learned renovating that house will help you.
And, purchasing tools is a life long process. Don't feel the need to rush.
Another outstanding video. Thank you!
Another great video and thanks for providing the pdf. I have many of tools featured and the pfd will help me fill in any gaps.
Thanks for watching, Danny!
Well done! I'm a tool guy, so I can say from experience you nailed this. PLEASE sharpen your grandpa's chisel asap!! :) :)
Thanks Darrin. Will do on the chisel!
110%. Wranglerstar has some videos that should help
Yes, please please please, there's a great chisel sitting just behind that damage
Thanks for another great video! Much appreciated!
I just wanted too say Thank You so very much. This video that you did inspired me to build a tool tote / bag. I have watched yuour video over and over again and honestly your Setup is really all anyone would need for a Personal / DIY Tool bag. I purchased the very similar but Larger 17" Husky Tool Tote, and have been building it over the Last several months. It's been a blast. And the Timing was/is great because I have been able to get some great deals on some of the few main Essentials. I purchased that very same Milwaukee 12v Screw driver with Two Batteries and a charger for $69 At Home Depot and in was able to purchase a 18v Brushless Milwauke Impact for $99 with a battery and Charger. I have the Same Makita Bit set in MM and Standard, a Pair of Milwaukee speed Squares, I'll get a Swanson when there available in my region. I purchased the Same Eastwing 16oz Hammer as yours. I'm slowly getting there with the Hand tools, I have a HD Klien Linesman plier coming too me, I have a Pair of Klein Long Nose Pliers, would love the Knipex like yours but I haven't seen any yet, I have the 10" Cobra Knipex Pliers, and the Same 9" Blue level as yours. I have on the way the Stubby Klein multibit screwdriver on its way and the 5 + 1 Klein. I already own a nice $75 Snap On Tools Ratcheting Screwdriver so this should cover me with Multi Scredrivers. I'm looking into the Wira, Wiha`s and the Kliens for Fixed / Solid shaft Screwdrivers. I have the Pentel Click pencil coming too me, and in was able too find the 6" Model of the Channel Lock Adjustable Wrench. I am going to ether just get the 10" or the 12" and I love that tiny 4" Slimline Channel Lock Adjustable Wrench. I have the Same Husky 6 bin Parts container storage. To hold some screws, carpenters pencil sharpener, Super Glue and Tape, Especially Plumbers Tape Always comes in handy. I purchased a Pair of Electric Measuring Calipers, for myself these are essential I can use them on many things. You have to have a few Sharpies on hand, and a really good BoxCutter / Utility knife. I also purchased the Set of the Chisels that you have, I wanted a punch and Nail Set and a few different size Chisels. We have a 5 1/2 year old son and I want too do what my Father did for me and so I Actually mouth the same Small Tote as yours from Husky and I am going to set him with some basic tools he loves getting out in the garage with daddy, and this is what he says he wants for Christmas, Tools From the Home Depot 😁 so he has some Channel Lock Adjustable Wrench's and a tape measure The Satinless Steel Magnetice Parts Bowl, a 1 Lb Dead Blow Hammer that way it doesn't destroy to many things like he would with a real Hammer, unless he decides to become a auto body repair man and beat on our cars 🤣😂 and too top it Off my wife has been wanting her own Tool bag so I Bought her a husky Zippered Tool Bag, and shell have a Pair of SlipJoint Pliers, Long Nose pliers, Tape Measure, Stud Finder, Ratcheting Multibit Screwdriver, Hammer so far. So like a said I think your video just produced a Family to have there very own Tools bags and tools for some years too come. Thanks for the Inspration 😎👍
Thanks !nice presentation !! Spring driven center punch/ nail set are also very handy and usa made.
For a non tool junkie, you got some really good tools and as a repair guy it was cool to see a bunch of the same tools I use in your video. You sure did your research.
Great methodology! I do the same when it comes to initial servicing of equipment with the pro's, thereafter, I do it.
Although cumulatively expensive, the longevity will surely be great.
You ever considered also including a selection of Hex keys & star bits too?
Great video.
Ditto on the hex and star bit keys!
You seem to put a lot of value on older high quality tools. There is an entire cottage industry focused on finding and restoring vintage tools. I have an old time carpenters tool box that I built that is full of restored tools from the early 1900 up to about the 1950s. There is something about giving an old tool a new life that Some people find very satisfying.
Yup, hit up yard sales, 2nd hand stores and pawn shops for USA tools at bargain prices.
Thanks for the pdf. it is a great shopping reference,
Thanks for watching, PP!
One other item to add to your arsenal is an infered thermometer.
Outstanding video. painless ! Thanks 😊
My father passed away a couple years ago and left a lot of tools. I swooped in and grabbed as much as I could. Among the Craftsman tools, dating back to the ‘60’s, were some power tools with die cast housings, not plastic. Built to last.
That's so cool that you were able to get some of your father's old tools. Thank you for sharing your story, Christine!
Well edited and to the point. Loved it.
That estwing 16 oz hammer was the hammer I grew up with its the best, and always reminds me of great memories of my Grandpa and Dad. You definitely have a great tool collection, thanks for the video.
Thanks a bunch, Albert! I like it so much better than my previous Stanley hammer.
I'm very glad to see that you have tools made in Spain! 😍
We have some brands here that are stunning. As you said are expensive, but are worth every euro you spend in them.
You should do a video on sharpening and refurbishing that nice chisel. Will be major ASMR for a lot of us.
nice assortment of tools , i like it keep making videos like this
I would keep the vintage chisel and learn how to sharpen it. Plenty of YT videos on it. The steel on those old tools is much better than it is today.
Someone else said the same timing. I think I'm going to hire someone to do it for me initially to get it at a good baseline first.
Actually, only the first half to 3/4 of an inch of steel is 'useable' hardened steel, the rest is a softer steel ... but yes, this tool just needs a bunch of elbow grease and some grinding stones to be up and running again. Could do with a bit of polishing agent on an old rag to polish that rust off the chisel, and perhaps a bit of sanding for the handle (on 1000 grid or so), then obviously boiled linseed oil to treat the wood. Most important after that is using a Wooden or Plastic Mallet to strike it, and NEVER use that Steel hammer !! (and obviously check the wood for metal before going at it with a chisel)... with this it's probably good for another 3 generations if not more !
I recently went through my grandfathers extensive tool bench in his garage and while many of his tools were antiquated rusty and out dated even, he had an assortment of foreign made tools that were still servicable. I would deffinately consider those heirloom along with his craftsman and others. My father has a lot of tools too as an electrician so I by no means will suffer from lack of tools.
Wonderful video! Thanks very much
great idea,, so appreciate your info and god bless your wonderful family,,, wonderful children
Thanks for all the great information!
You're very welcome, Mary!
Terrific video! Thank you! I would add a mini offset ratcheting screwdriver for really tight spaces (just used on this morning). Also, the Yankee Push Drill which has been revived by Garrett Wade and true to the Stanley original. I believe it’s made in Germany now. I use my grandfather’s Stanley, but gifted a Garrett Wade to a dear friend. He absolutely adored it. Also, in my travel tool bag, I include a center punch, nail set, fastener gauge, folding or keyhole saw and a smaller pry bar to pair with the mid-size prybar like you have (it help to have a second prybar when trying to remove wood trim). I don’t tend to carry a lot of electrical tools unless I’m specifically doing that kind of work, so I have a separate pouch for that which includes some assorted wire nuts as well as a lineman’s pliers which is great for work with wiring. That’s all I can remember right now. My 3 cents. ~Chris
That's a GOOD 3 cents!!!
Great video. Estwing hammers must be the most frequently stolen tools ever. I had the two I inherited from my dad, and the ones I replaced them with stolen in 10 years working on sites in Dublin, Ireland.
I agree. My father was a machinist and I have his vise grips, craftsman socket set and vernier (in brass). All made in America and all still working.
I highly recommend Milwaukee's locking pliers. They're made in Taiwan (so it's actually made well) and the adjustment mechanism is by far the best I've ever used.
I also really recommend Neji-saurus pliers. They're helped me many times with screws and nuts I would've been screwed if I didn't have them.
Set of nail punches, multi scrape, filling knives, sandpaper ect. Surface preparation tools basically
You should also get a compass and/or protractor. I recommend having silicone sealers. And as far as tools go, you should get a re-threading kit, for repair of stripped screw holes. And you need a chalk line reel.
Great video, thank-you.
Anything from the Milwaukee M12 series is great!! Nice setup.
I've been SO happy with the Milwaukee M12 series!
Check out the m12 right angle grinder a legit metal working tool
Milwaukee is made in China
Very informative video, thanks. If I may suggests, yard sales, tag sales, ebay, etc. are great places to hunt for vintage tools, because I firmly agree that the older American made tools are vastly superior to a lot of foreign made tools. I collected many this way and I am extremely happy with them. Thanks again
I'm a contractor and I approve of most, if not all, of your tool choices. In fact I have many of the same exact ones in my everyday bag that I use in commercial and residential construction.
word. “so when I need to use one, it’s a good one!!”
You miss out a carpenter's pencil 😉
I used to carry one but I just used the mechanical pencil the while time so I got rid of it for this redesign.
@@TheUrbanPrepper Add lumber crayon, marker, grease pencil etc in case you need to write on a surface that the pencil can't such as glass or brick.
Otherwise known as a No2 pencil
Happy New Year ! It's good to hear from you. Heirloom tools is a good way to say it. I have many tools that are forty years old and still function well.
Excellent Video As Always. 💯👍👍😎🇺🇸
Thanks a bunch! The old tools are the best. I want more of them!
TH-cam... suggest this video FFS
These are all such awesome tools!
Thanks Matthew! I'm really happy with all of them. They're so much nicer than my previous tools.
It looks like Home Depot has redesigned the Husky Tool Tote (10") since the version shown and given it notably less storage compartments.
* Outer pockets: Reduced from 16 to 12.
* Interior pockets: Reduced from 7 to 3.
* Added closing flap pouches adding secure storage but making it limited to smaller items.
* Added a rotating handle (handy to get it out of the way at least, not sure how reliable it will be over time).
* Got shorter?
The overall dimensions seem the same (10Wx 9Lx 11H) but they may be measuring to the height of the handle. The sides of the new one seem much shorter further limiting how much will fit inside. Pocket depth would also be impacted.
I’m seeing people in the comments saying “you need this or that (specialized plumbing/electrical/etc) tool”. I agree you need some of them, but you don’t need them in a tool bag. A tool bag is supposed to be a kind of go-bag with the tools you need to get most jobs done. The specialized tools can be added if you are going to be doing a specialized job. Otherwise, they can stay at a workbench/garage/storage area.
Yeah, I tried to make this more of a General tool bag. I figure that an Electrician, Plumber, HVAC, or some other contractor will have more specialized tools.
TheUrbanPrepper Exactly, that’s what I like about yours and think it’s a great setup.
Love your approach. Lost my dad 20 yrs ago but think of him every time I use his tools. I have been doing the same, about 80% same tools as you. Differences - hand cleaner, flashlight/clip on light, rubber mallet, countersink punches, Milwaukee folding saw, Olfa retractable utility knife. Thx.
That's actually a pretty impressive tool collection. Now I hope I can assume by your page name you live in a city environment. I'm a farm land mountain man who does commercial HVAC, plumbing, logging, auto mechanics, gardening and carpentry so I have a very extensive set of tools and power equipment. But I have to say you have one of the best tool kits I've ever seen from a more urban environment. Good job!! Don't get into a hurry my huge inventory of tools and equipment took me 15 years and a lot of work to acquire. Keep up the good work!
Good to see your kids added. Great choices for tools. Never consider German made tools before, even though I used German made knives for work daily.
Great vid and PDF list. Quick question: do you carry, in any of your bags, a 4-way sillcock? Thanks!
Always on point.
19:00 "heavy gauge billet aluminium alloy construction is die cast for ..." So is it machined from a billet, or is it die cast? It can't be both. Spoiler: it's die cast.
"... is die-cast for increased accuracy over laser-etched and extruded stamped rafter squares." (Swanson) and as _they say_ it's die cast for superior accuracy compared to extruded and laser etched stuff
an addition would be a painters putty knife..heavy blade,roller cleaner,calk remover,
Hey this is a great video and collection!!
I’m surprised how similar my tool bag set up is. Buddies are always amazed when I show up with my tool bag. There aren’t too many jobs around the house I can’t complete with my tool bag and one or two power tools to suit the project we are working on. Your accessory tray should definitely include some drywall screws and some various lengths of wood screws, and some self tapping sheet metal screws, and a few anchors or your choice for drywall. A set of quick clamps are very useful. Those 3 bit sets could be combined into one if you toss those divider bit holder things. They are very frustrating after a while bits are hard to get out and even harder to put back in. Without them. You just open the box and rifle through and find what you need in no time.
I've got a few suggestions for tools:
Wera Tool Check Plus.
It's nearly my EDC, Bits, Sockets, a small Bit-Holder and a small but durable ratchet. I don't know if there's an imperial version.
Again WERA:
The yellow screwdrivers can be used for small prying, hammering or similar jobs. I haven't broken one yet.
And one more knipex Tools:
The "Zangenschlüssel".
Imagine a combination between a adjustable wrench and the knipex Cobra.
Very nice setup for general use. Consider having a bit of steel wool in one of those pockets to knock off the rust as it comes. Combine a very very small amount of WD-40 with the steel wool and you'll never have a rusty tool
Nice video. For good clamps I'd definitely recommend kant twist or bessy clamps. Both are of great quality and superior design over traditional c clamps.
Unexpectedly informative!👍
Just a recommenation, you should also buy a small and light hammer. To use if you have to work on a window or close to something brekable. And use it with light taps. As for your toolbag everything a homeowner needs around the house. A very good review.
Nice to see someone not waiting till their sixties (like me) to update their tool collection. You’ve invested well. Had a daughter recently thank me for the kit I’d put together for her as a teen. If you don’t use em - the next generation will!
Thanks a bunch! I love that a lot of these tools will be able to be passed down to my kids someday.
I started a similar endeavor about 2 years ago when we started remodeling our place. I did all the work myself with the help of my more knowledgeable Father. And I determined very early on that I was done messing around d with low quality tools, and started replacing all of my hand tools with stuff that I'll eventually pass down to our Son. And I've since invested in Pro grade cordless tools from Bosch and Milwaukee. I know your tool kit will serve you well! Being handy is an overlooked and necessary skill.
Thanks for sharing your story, Tim! Sounds very similar to my thought process with regard to good tools.
Very nice.. For some reason. I like having one of those thick Home Depot pencils lol
Thanks for the video
Pretty good kit. I will recommend a pipeslice
Nice tool bag setup.
Thanks David!
This is an excellent video. Would love a follow up to see how these tools have treated you since!
You could resharpen that chisel. Also a lot of mechanics recommend if you can't get USA made Vise grips go with "Grip On" Vise grips made in Spain. They are high quality and designed very well. I prefer their release handle, which is built into the handle over the traditional style, which is inside the handle.
Irwin owns and make Vise Grips
Id love to see a review on the Milwaukee screwdriver
Vise grips I use are the STANLEY FatMax FMHT74886 10-Inch Curved Jaw Locking Pliers and the Tekton 5 inch locking pliers. I use the 5 inch one more often and it's easy to carry around in my pocket. I would also like to get the Leatherman Crunch, but I need to save up for it because it's expensive.
My dad has so many tools,he work on a farm for almost 50 years as a Jack of all trades and when he retired and the sold the farm he was allows things including an old carpenter box with handplanes,wooden hammers etc and he said that the box with contents was for grandsons when he passes away
Wow! I bet the box contents has all sort of awesome tools in it.
Snap on duck bills are one of my most favorite and used pliers.
I love them. They're awesome.
Awesome video!
Nice video! I’m a tool addict myself, and I like the selection