Hot Bodies Modified Fender Eliminator - CBR250R
ฝัง
- เผยแพร่เมื่อ 1 มิ.ย. 2024
- I installed my Hotbodies Fender Eliminator with a bit of a mod on my 2013 Honda CBR250RA. This kit has a bracket that is known to crack easily because it was not designed to hold the weight of the stock lights. I replaced the stock lights with after market mini lights which are shorter and lighter.
This installation wasn’t easy because the disassembly part was so difficult. Installing the new fender was easy. The mini lights only drew 2 watts of power causing the bike’s burnout indicator to go off by hyperflashing. In a future video, I will install resistors to correct that.
I hope I don’t have to replace my license plates often because I would have to disassemble the fender to get to the mounting screws.
But overall, I’m loving the new clean look of my bike. If you have the hot bodies fender eliminator, let me know what you did to fix the bracket issue by adding your comments below. Thanks for watching.
Awesome, I wanted to see this video because I'm repairing mine from a crash and needed to see how to reassemble the tail light section, but now I think I can save myself a headache by just putting a fender eliminator and forget about half the part I originally needed to reattach
Thanks for the great video. I just bought the same bike, so far like everything about it but will keep your vid handy for a future references.
Thanks for the extremely detailed video. Will be following along step by step when I install mine.
I installed a Hotbodies Fender Eliminator on the wife's '12 CBR250R. I'm very mechanically inclined but this install still presents it's own challenges. I did the same mod as you (exact same style mini turn signals) except instead of LED I got ones with traditional style bulbs (on Amazon for $12). This prevented the hyper-flashing problem people get with LEDs and eliminated any need for Resistors. Thanks for the video/tutorial as it was very helpful and insightful in the installation process! Bike looks better than ever and now we just need some nice weather to get out and tear up some pavement!!!
Hey, if you get the time, could you link all the parts you bought including the lights, fender elimination and everything needed to make this mod perfect? Thanks :)
Which mini lights
Much easier to remove the entire rear body section, with the taillight attached. Allows easier access to the fender bolts.
Excellent video! Thanks for sharing.
Perfect thanks for your share yours knowledge and experience sir sucses for all
Great video! I have the same bike and I did the same mod. It took me two days to complete it...so one afternoon is pretty darn quick! I opted for the integrated sequential LED tail lights from motodynamics cuz I read about the cracking issue with having the OEM blinkers installed on the hotbodies kit and I ddn't want the mini blinkers. It turned out great and still looking good after 2 years.
+Andrew Lee That's great to hear it's lasted 2 years for you. That's awesome.
when I buy the fender eliminator kit, I will be pairing it with the integrated tail like so no issues will arise AT ALL...
Beautiful bike
Good work 😎👍🏽
I think a small cb mounting bracket could replace the turn signal mount that comes with the kit. Or I could make a metal bracket as well. If nothing else, to go inside the plastic one to reinforce it.
I drilled a hole in the middle of the bracket through the fender that way you still have a sleek look and no wires hanging.
Nice exhaust...
Thanks for the great video it helped a lot with my installation the other night! I don't known if you can answer this but the problem I have run into is the electrical. For the life of me I can't figure out what wires connect to what. Nothing is really color coded and they aren't marked either. So do you know the proper wiring combination for the brake light, turn signals, etc?
Thanks!
I wonder if that bracket that snaps easily is replaceable. Mine just broke and bought the whole assembly again, and hope I can just install the new bracket.
Nice video!
perfect music choice :D
Peter Gulka Haha thanks. And congrats I guess for being the first one to comment in my channel lol
So much respect for that music bud..
Awesome bro
Very helpful good video
nice video man!!!!
Yiu Leung Ho Thanks for watching bro.
Awesome 🔥
Great video
+Roma Pok Thanks!
How is it when it rains? still protect the second passenger from the mud? Or when you go alone, are tracer and intermittent light stained with mud?
Nice video man,,i would like to know abt that exhaust too..
How well has it held up? I'm thinking about getting this for my 2015 CBR300R cause the stock fender is god awful and ugly as sin. And you had to drill holes for the license plate right? Cause I think they were designed for american plates which are like an inch smaller than ours in ontario.
Hey man it's a very cool bike ..What exhaust is that ? Brand?
nice video
hey where did you get those aftermarket tail lights?
I'm trying to put my rear end back on.
There is 2 pairs of yellow and black wires for each rear turn signal and a purple and black wire on the rear end assembly. I can't figure out which wires coming from the bike are for the blinkers and where the purple and black wires go...any help guys? I think the blinkers connect to red black, red black but not too sure about the purple and black.
pro video
presentaion !
Hi Brady, where you buy the fender? Any link? Thanks
you actually push the center of the pop rivets in to take them out. its easier and less chance to damage them...before you put it back together you push the center pin out. then push it flush when its installed to lock it in...
hahaha.. your definitely right i was wondering why he has to pull it over..
Suzuki and Yamaha have push pins like that. Honda uses pull pins. Just manufacture preference.
it would be nice if you post the link where i can buy those new fender
Hey Michael, it's been almost 1.5 yrs since you installed this fender eliminator, how's it holding up? I'm interested in this item, but I've read reviews regarding the poor durability of the signal lights bracket.
+MKK2004 It's still going strong.
+BrownBrady thanks Michael for the quick reply, I'll go ahead and order this for my CBR300. Very good installation video, I'll use it as reference for my install ;)
What is that item you took out after your glasses? What does it do?
should the number stand be specifically for honda cbr 125 r
At the end when you are inserting the license plate light into the bracket, I noticed a big red plug with a rubber cap over it. Do you what that is?
Michael Weigel Sorry, but no, I don't know what it's called exactly.
Honda Flux capacitor .
Bulumoovi
Where I can buy the fender eliminator kit complete?
Wait a second at the end you mention you do not want to change your license plate because you have to take apart the fender? I just bought a cbr with the same modification. I was wondering how you hold the plate on! So it is with a nut and a bolt? I screwed two 2 1/4 screws in and they went up on a curve and held but I figured it was wrong... How long are the screws holding the plate on? and they you have a nut inside the plastic holding the plate on? I was going to try to zip tie but noting hole wise to zip tie to... How long to take apart if this is the case?
+G Picks I used a nut and bolt that came with the kit. Otherwise, you should be able to find stainless steel ones at the hardware store. A screw will not hold it securely as the plastic is not thick enough for the threads to grab on to. But to take it apart should only take 5 minutes or less.
+BrownBrady Ok thanks so I need to open the plastic up and add the bolt from the outside and the nut on the inside correct.. My guess the bolt will not need to be too long.
+G Picks Yes that is what I did. Technically, it doesn't matter which side the bolt head needs to be, but it looks better on the outside. But if the bolt is too long, the bolt head may need to be inside.
+BrownBrady Got it thanks it worked... I went to a local Ace hardware store and bought some 1/4 inch by 1/2 inch length carriage type bolts that you could not unscrew just to be safe with some of those nylon self locking nutss and it worked perfect. Cost $1...thanks again.
+G Picks Glad it worked out for you!
wich exhust you're using ?
What exhaust are you using here ?
Do you have any idea on how to install gear indicator or at least what kind will work
You can try this one from the CBR Facegroup link: amzn.to/3tGEWqj
I have the yoshimura, but i still watched this. I was wondering how much weight did you shed from your bike?
I don’t remember but I don’t think it was very much. I replaced it mainly for looks and increased sound.
Qual o nome do elemidar de cabeta que vc colocou deste video para eu comprar ?
Hey where i can get the fendor eliminator??
Please reply
SIR, THE NAMEOF YOUR EXHAUST???
ggoooooood very nice
where can buy this fender eliminator mod?
What exactly did you gain with this mod? Did you make the bike better? Horsepower, comfort, safety, visibility, braking power, handling, less wind buffetting or resistance, storage, fuel efficiency, engine cooling, electric heating, ease of maintenance? And you created an electrical issue.
chill man ! the bike looks a little better and clean than before. He has gained more love towards his bike after this mod. I dont know why people get so uncomfortable when someone pays a little attention to the asthetics of the bike.
hola , como pido ese adaptador de la luz de placa 4:30, para quitar todo lo demás??
What Exhaust on ur Cbr
Where you buy it?
Where I can get a new part of the cycle ?
do you sell it?
Restu Adnan No sorry, I don't sell this part.
@@Brownbrady hii brady
where we can get that body
how to install bar light in cbr 150
How to order this bro......
Pls share the link... ASAP....bro
Is this fender eliminator kits work on Honda cbr300r?
+Everything isFun No.
It is possible to convert cbr250r into cbr300r
crazypilar
this also work w/ my cbr150r?
+Carl Jael No, I don't think it will work. :(
It would've, the CBR 125 to 250 is the exact same on the tail part of the bike ;)
Im about to ask the same question.
Nice work , but the signal lights appear dim !
+JOGO I agree, they are on the dim side so I like to use hand signals as well.
+BrownBrady got ya
Saw off the plate under the headlights its way better
Prefer a better before and after
Liz lieing about removing that 3rd bolt .. I didnt even see her hand touching it
Nice from india
Shit thx
You're welcome, Emmanuel. Thanks for watching.
Basically you put a shit mod on your bike ( it can't take the weight) lol
Bru help me sefl bearing
Gak bisa BHS Inggris
J,ai acheter un fender eliminator et la qualité du produit est médiocre pour un prix exorbitant et un instalation dificile qui endomage le cuircuit electric d, origine et il ne donne pas les vrais informations pour décrire le produit aucun info et un minimun de matériel pour installer.
The new bikes are moronic with almost no storage space under the seat. Honda and Yamaha seem to be in competition to see who can make the most silly looking bikes.
it still look ugly...
DRAGONS DRAGONS looks good to me
Where I can buy the fender eliminator kit complete?