kebc clutch actuator delete. no flashing light. brute force prairie

[@rrodgers40]

Does this apply to the 360 because it didn’t work on mine. Thanks

[@tonymontana1111111]

any update after riding the bike

[@norbiorban1032]

4 pin relle work ?

[@danatv3046]

Runs great. Still have engine slowing you down. No issues

[@cameronbell7052]

Mine doesn’t have a fuse Box

[@neykovt]

Can you draw some diagram and published it please?

[@charlysuarez3521]

¿and color blue?

[@drazen.tisljar]

I have a problem with flashing 2wd 4wd on the screen every 4 seconds (both actuators in problem), took both out checked with 12 v voltage (tested potentiometers, speed sensor, switch 2wd 4wd, f / r sensor, checked every wire from connector to connector, fuses all correct), but still the same error, now I made a kebc delete as you described in the video, the flashing stopped, I change the switch from 2wd to 4wd only on the display, but the actuator for the 4x4 still does not work (am I wrong somewhere? I suspect the actuator controller ,
can i somehow test the controller before buying a new one?, because it is not very cheap, thanks

[@danatv3046]

Try the kebc motor on the 4x4 actuator plug. Its the same plug. Can see if its moving. Probably actuator.

[@nikkipachioli]

will this work for a 360 as well and can you send me a diagram for this thanks

[@danatv3046]

I don't know. wiring is different on a 360

[@coltonyork3803]

did you ever fix your?

[@cameronbell7052]

So the kebab can keep the 4x4 from working.
4x4 stopped working when someone changed the belt I reset the belt but never made sure the belt sensor was in the right position.
Belt light went out but 4x4 light was a 2 second on off blink.
Mencken wasn’t correctly seated . So I put it back correctly
4x4 went to a half second blink. The switch the wires and the 4x4 actuator are all in good shape no corrosion burn marks mud. But the lights still on

[@danatv3046]

electric model box under the seat can go bad or the actuator. actuator can work when putting 12 volt on the motor but doesn't mean its going to work on the bike

[@cameronbell7052]

@@danatv3046 makes sense
Do I have to put a relay in or can I jump it to the battery

[@danatv3046]

i meant if you want to test the actuator motor

[@cameronbell7052]

Oh ok I meant did I have to put in a relay to delete the kebc if so I’ll get one

[@danatv3046]

i would try. kebc is useless anyway

[@norbetobolanos8509]

good morning, can you help me how to do this removal of the la liz belt so that my four-wheeler responds

[@danatv3046]

its in lip mode?

[@andrebrooks7040]

Does it matter if the relay is a flasher relay?

[@danatv3046]

Not if its the same kind of relay

[@andrebrooks7040]

@Dan atv Iappreciate your video. I was able to do it just as you did and 4x4 works great! I’ve bought the KNIGHT kit, as my quad is still in limp mode with belt flashing…wtfffff

[@danatv3046]

Need to reset the belt light. Did you open the belt cover or unplug the wire while the key was on?

[@andrebrooks7040]

@@danatv3046 I believe it was ran or tried when cover was off. I’ve since deleted the side cover belt light and just wired it in solid.

[@danatv3046]

So its ok know?

[@edgarsblums3900]

Hello. Do you can send diagram to me. Thanks

[@danatv3046]

Wiring Diagram for the kebc?

[@edgarsblums3900]

@@danatv3046 yes

[@edgarsblums3900]

I rebild wiring and now it's ok.Thanks🥳

[@neykovt]

Share with me please