This was perfect as a vanity desk for me. th-cam.com/users/postUgkxMAlHv7-BBWMrPRm5-uEoD6rtdT7SG2Qr Especially the glossy finish. Easy to cleanI was looking for something that wasn't the traditional white and with more of a modern feel. This fit the bill beautifully. I put it together with no problems, by myself in under an hour.Make sure you double check where you place the drawer tracks before screwing down. I had one track that needed to be aligned with different holes than the rest.
Liking what I see, will purchase the plans soon. When I get to building mine I'll be cheating and using my CNC router for some of the work :) Looking forward to the next update, keep up the great work.
You've mentioned the importance of stiffness and minimizing warp for the sliders. Have you consider using plastic lumbar on the sliders (or other hidden parts) to provide a more stable material.
+mccreary637 A little, the higher strength stuff seemed fairly expensive compared to wood and as long as you plan carefully expansion contraction shouldn't be too much of an issue. My slides actually shrank slightly over time and I shimmed them out with a piece of the low friction tape to reduce play back to normal.
I think that its possible to avoid major of leftover chips if you try steam bend solid wood instead of cutting ply, also maybe pre bending plywood composite by yourselves can save some material, good job anyway and its also nice that you also take care about material efficiency, its rare behavior those days. ;)
You did a really great job here. I'm going to attempt to build one myself for my office. I needed a round table that wasnt so big all the time. This is perfect.
This will not be your "grand dads" Jupe table. It will be interesting to see how the inside if the ring is fitted to the closed, out if round table? This is really fun to watch, Thx.
+Hugo Danilo I was concerned about spring-back and internal tension distorting the shape. The waste of building a bending frame should be included too. (I also had the 1/2" plywood on hand, anything else would require a trip to the lumberyard.)
Scott, I believe you and I have corresponded about your table but, I cannot find your email. Can you please contact me. I'm not far from you in Michigan and would like to discuss this project.
This was perfect as a vanity desk for me. th-cam.com/users/postUgkxMAlHv7-BBWMrPRm5-uEoD6rtdT7SG2Qr Especially the glossy finish. Easy to cleanI was looking for something that wasn't the traditional white and with more of a modern feel. This fit the bill beautifully. I put it together with no problems, by myself in under an hour.Make sure you double check where you place the drawer tracks before screwing down. I had one track that needed to be aligned with different holes than the rest.
Stolen copy of your video here:
facebook.com/woodworkingcrazy/
Google "facebook copyright form"
I have to say I am impressed. this is an engineering masterpiece. someone paid attention in geometry class.
John Nelson i wish i did .
this dude is very impressive
John Nelson
John Nelson Sitanggang
Loved the shot of the brushes sparking. Good stuff
nic
Great watch, really enjoyed it. Any rethinks 2 years on? Planning a work bench but can decide if this will work for me.
Liking what I see, will purchase the plans soon. When I get to building mine I'll be cheating and using my CNC router for some of the work :) Looking forward to the next update, keep up the great work.
You've mentioned the importance of stiffness and minimizing warp for the sliders. Have you consider using plastic lumbar on the sliders (or other hidden parts) to provide a more stable material.
+mccreary637 A little, the higher strength stuff seemed fairly expensive compared to wood and as long as you plan carefully expansion contraction shouldn't be too much of an issue. My slides actually shrank slightly over time and I shimmed them out with a piece of the low friction tape to reduce play back to normal.
Should get shock absorbing gloves designed for people with carpal tunnel they help with vibrations
I think that its possible to avoid major of leftover chips if you try steam bend solid wood instead of cutting ply, also maybe pre bending plywood composite by yourselves can save some material, good job anyway and its also nice that you also take care about material efficiency, its rare behavior those days. ;)
Мужик, ты гений!
You did a really great job here. I'm going to attempt to build one myself for my office. I needed a round table that wasnt so big all the time. This is perfect.
Wow that is a fantastic table.
Hello, have a good time, I want the accessories for this table, can you send them to me in Iran
This video has been taken and posted on Amazing Woodworking TH-cam channel.
This will not be your "grand dads" Jupe table. It will be interesting to see how the inside if the ring is fitted to the closed, out if round table? This is really fun to watch, Thx.
oops, I guess its not round when extended, hmmm.
Looks really nice, looking forward to next week's vid. :)
Where I can order some table like this but I need different sizes. Thanks.
Plans for the main size are on my site, see description. Thanks.
how to make arms . and what is the angle ,lenth .
bringing order to chaos, well said
Why are you worried about sawdust waste?
Just mix it into soil.
Exposuee to vibration may cause carpal tunnel and nerve damage.
Great progress! Can't wait to see the final upgrade.
very very very impressive.
wow .my math is always screwing me in the end.lol
thumbs up for brush sparks
Vrhunski moze li prevod
ຂອບໃຈສຳລັບສິ່ງດີໆທີ່ເຈົ້າສອນ
Nice work
Great Table but all that buhuu about the waste ...
Why didn't you bend wood for your ring? Less waste. Better look.
+Hugo Danilo I was concerned about spring-back and internal tension distorting the shape. The waste of building a bending frame should be included too. (I also had the 1/2" plywood on hand, anything else would require a trip to the lumberyard.)
Sant jordi
+Scott Rumschlag seeing you 4 my 📱 was on the
great idea, thumbs up
Rauman
Bạn cho tôi xin bãn vẽ chỉ tiết được không
hi guys i'm from mongolia i need this table details size PLS can you give me
For example this metall size
I want to do it
Plans are available on my site, see video description.
how much it cost dude?? $$$
Few inch of currency.
I am stunned
wonderfull idea! Really cool! Congratulations!
Who cares about the waste, of saw dust. Use it with some wax and make a presto log.
Great table though.
You sound like Howard Shore! I'll watch his video where he narrates through the LOTR symphony now.
What does 'an inch heavy' mean?
Roughly 1-1/16"
Hi
low
Vc tem como mandar a tradução em português do Brasil
Hello Scott, could you check your mail?
схемы можеш отправит?
Excellent
Very good
Definitively fan ! 'I'll warm my saw ;-)
Could you send me the drawing, please?
See my site.
What's the website address?
mechanicallumber.com/
por favor si pudieran explicarlo en castellano o español
Great
Nice
I want detailed cad drawing for this table
🙋👍👍👍
Please sen to me drawing ????
好创意。。。科教版
Scott, I believe you and I have corresponded about your table but, I cannot find your email. Can you please contact me. I'm not far from you in Michigan and would like to discuss this project.
Thanks, I saw your email and will respond there.
Перевод сделайте на русский пожалуйста
You say "we" a lot. Who is your partner in crime?
+Devin Sloan My brother, you see him periodically in the videos. I'll update the "About Us" section on the site soon and he'll be on there.
Scott Rumschlag
Scott Rumschlag hi Mr are the site for you....?
algo referente a este video
th-cam.com/video/BuKbsmd6dnY/w-d-xo.html
Sub