just the corner and a little bit of the bottom doesn't work for touch...do I need the whole 50 dollar assembly or can I just replace the touch screen? thanks
I'm having trouble getting the screen off. I dont know what temperature to heat it with. I'm currently heating it until it gets almost too hot to touch. Then I try to pry it apart like in the video, but the screen is not seperating. What temperature and how long do I need to do it?
I got a question, I did this process on a lg g3 stylus because it was doing the ghost touching.... at the part when you separate the screen and digitizer, there was a gray tape on the screen is that important? Because I installed everything again and the phone boots up correctly but the touch won't work... I tried a hard reset and nothing.... I can't even config the phone... the gray tape that I mean is the one that is like covering al the stuff on the screen and the flex cables... Please help!
Hello my friend, can you help me? I did the exchange of my touch, following your steps everything happened, thank you! However, two things on my touch are not the same as those at the factory. 1. I can not unlock the screen by double-tapping the screen (Block myself) 2. It is not possible to perform a very long touch (it is not possible to remain by clicking a button for more than 3 seconds)
Hi there. I'm a bit confused on what exactly I'm supposed to be buying for my lg g3. I dropped it the other day and it ended up getting a deep cracked spot right on top of where it shows the time(the time while on lock screen) The cracks are spread out around the crack/hole thing like a spider web and there's also cracks that seem to be under the glass that go all the way down almost to the bottom of the screen and they go all the way to the top as well. The whole top of the screen doesn't work and the only numbers that it will let me press on the lock screen are 2,7,9,0 and 5. It can't be unlocked at all. What exactly should I be buying to fix this problem? Thank you!
I have a question, what are symptoms of a failing or damaged screen? because in my case the screen works fine up to 20 seconds and then stop responding, if I lock the screen 1or 2 minutes, an then is unlocked works fine the same 20 secs, no dead areas, no dim problems, no dead pixels , just that occurs. Thanks.
Hi dude, i recently broke the screen of my G3,the screen works just fine but it doesn't respond to touch?Shouldn't i replace only the top glass? Thanks!
I recently changed a screen and digitizer on the G3 and the middle row of Keys doesn't respond... The QWERTYUIOP & ZXCVBNM works & everything else works fine. It's just the ASDFGHJKL that doesn't work. What would that be????
hey buddy. my screen flickers all of a sudden and then goes black while im using on my lg g3. I can feel that my phone is ON but there is no display. if i press the power button it comes back ON again and then flickers again. what would be the cause. Please help. thanks
+InjuredGadgets i did open the back cover to check. found everything in its place. pressed it also to tighten if loose. so if bad lcd then would u recommend changing it and there is any other way to fix this? plz let me know. thnx
Hey bro my touch is not working at all. Sometime accidentally it worked. There are no any crack on screen neither I've dropped my phone. What should I do? Reply ASAP
This is irksome, I watched thisvideo because I wanted to know how much pressure is necessary to hook up the screen... @ 8:23.... and allyou do is push it in all naturally... I cant get it, been struggling for like a half an hour before I decided to watch a video..
I saw a screen in online store but this is for d855, my g3 is d858. It is OK to replace the screen of my d858 with a screen for d855?
just the corner and a little bit of the bottom doesn't work for touch...do I need the whole 50 dollar assembly or can I just replace the touch screen? thanks
I'm having trouble getting the screen off. I dont know what temperature to heat it with. I'm currently heating it until it gets almost too hot to touch. Then I try to pry it apart like in the video, but the screen is not seperating. What temperature and how long do I need to do it?
I got a question, I did this process on a lg g3 stylus because it was doing the ghost touching.... at the part when you separate the screen and digitizer, there was a gray tape on the screen is that important? Because I installed everything again and the phone boots up correctly but the touch won't work... I tried a hard reset and nothing.... I can't even config the phone...
the gray tape that I mean is the one that is like covering al the stuff on the screen and the flex cables...
Please help!
Hello my friend, can you help me?
I did the exchange of my touch, following your steps everything happened, thank you!
However, two things on my touch are not the same as those at the factory.
1. I can not unlock the screen by double-tapping the screen (Block myself)
2. It is not possible to perform a very long touch (it is not possible to remain by clicking a button for more than 3 seconds)
Hi there. I'm a bit confused on what exactly I'm supposed to be buying for my lg g3. I dropped it the other day and it ended up getting a deep cracked spot right on top of where it shows the time(the time while on lock screen) The cracks are spread out around the crack/hole thing like a spider web and there's also cracks that seem to be under the glass that go all the way down almost to the bottom of the screen and they go all the way to the top as well. The whole top of the screen doesn't work and the only numbers that it will let me press on the lock screen are 2,7,9,0 and 5. It can't be unlocked at all. What exactly should I be buying to fix this problem? Thank you!
hey i just cracked my screen but the one corner where it is cracked, past that crack the digitizer doesn't work could i still sell it to you?
So what happened to the adhesive tape? Did you skip that part?
I have a question, what are symptoms of a failing or damaged screen? because in my case the screen works fine up to 20 seconds and then stop responding, if I lock the screen 1or 2 minutes, an then is unlocked works fine the same 20 secs, no dead areas, no dim problems, no dead pixels , just that occurs. Thanks.
Hi dude, i recently broke the screen of my G3,the screen works just fine but it doesn't respond to touch?Shouldn't i replace only the top glass?
Thanks!
+Burak Veli Replace the whole assembly.
too expensive
Just replace the digitizer assembly. You can get it for 20 bucks on eBay.
after software I am going on device butt keypaid not showing plz help what can I do
I recently changed a screen and digitizer on the G3 and the middle row of Keys doesn't respond... The QWERTYUIOP & ZXCVBNM works & everything else works fine. It's just the ASDFGHJKL that doesn't work. What would that be????
+Chad Handy Bad digitizer on the new screen you bought. Return it to whoever you bought it from and purchase a quality one from us
I replaced my screen and it powers on but says that hardware is damaged and it won't recognize touch input. Ideas?
you didn't show how you put and aligned the connections at the bottom. how much can you bend the connections
Hi injured gadgets can you repair my lg g3 display please
hey buddy. my screen flickers all of a sudden and then goes black while im using on my lg g3. I can feel that my phone is ON but there is no display. if i press the power button it comes back ON again and then flickers again. what would be the cause. Please help. thanks
+Jolan Cabral Likely a non secure connection or bad LCD.
+InjuredGadgets i did open the back cover to check. found everything in its place. pressed it also to tighten if loose. so if bad lcd then would u recommend changing it and there is any other way to fix this? plz let me know. thnx
Yea i recommend changing the LCD. There's no way to fix it as the part has gone bad
+InjuredGadgets k thnx a lot.
no dont replace it it does that with all lg g3 phones
My lg g3 d855 screen is broken and it's possible to change the screen lg g3 ls990?
google play yes as long as it doesn't include the frame
Hey bro my touch is not working at all. Sometime accidentally it worked. There are no any crack on screen neither I've dropped my phone. What should I do? Reply ASAP
how to just replace the touchscreen without LCD replaced
Agung Setyawan
This is irksome, I watched thisvideo because I wanted to know how much pressure is necessary to hook up the screen... @ 8:23....
and allyou do is push it in all naturally... I cant get it, been struggling for like a half an hour before I decided to watch a video..
went through the hard work and all annd found out i bought the wrong lcd :v