I have a small question. I've watched the video and looked through the comments but I cannot figure out how to remove the small board in the lower corner. In fact, I'm not even sure what the board does. Can you offer any guidance?
I have a few question regarding the the screen and frame replacement? 1. Is it required to use an adhesive to replace the the rear cameras,Earpiece Speaker, Vibrator (basically any component taken directly from the housing)? 2. There is a small circuit board that is at the base of the G3 to the left of the headphone jack how would u suggest removing it?
Can the screws fit in any hole that you place them into, or do they need to go back exactly where they came from, I know from the iPhone you have screws that are bigger and smaller, so you have to place them exactly where they came from. Thanks
My screen is cracked up at the top and everything above the dragon is no longer touch-sensitive. Is this normal? Or does this change how I need to repair?
Heres a question i havent seen asked or anwered!! ( i have a lg g3 d852(canada version)) and it is cracked screen and digitizer, bezels a little bent, Can i use a d850, d851, d855...etc screen,digitizer assemby+ frame for a fast fix with no problems? Or would it have to be a complete d852 repair?
when looking at screens from other sites, i can see that there are different screens available for verizon, T-mobile and AT&T devices. Since i'm in europe i have a device that isn't connected to one of these brands. Will the screens you supply fit for my G3? Or aren't there any differences between these screens? Thanks in advance.
Hi there, I recently got the LG G3 Battery from you guys, but the battery dies very quickly opposed to the one that came with my LG G3. Is there something I should be doing with the battery for optimal performance? Also got a screen from FixEZ too, and it was an easy process. Thank You very much!!!
if i buy the lcd screen with the fram woul di need to use a heat gun? or would i just need to remove the motherboard the earphone and the cameras and put them in the new one?
My screen is cracked from the inside and half of my screen is black with vertical lines would I have to get a new phone? Or would replacing the lcd help?
Good video, totally helped me. Though after it was all assembled did I see that the metal screen protecting the ear speaker at the top of the LCD did not get moved from the old to the new - and it wasn't noted to do so in the video. Since it took me 2 hours to do the replacement (my first and I was a bit scared), I"m going to live dangerously and go without. But I recommend you note that in an updated video ... or somehow else. Dealing with the adhesive strips is a hassle, especially the skinny sides. But I'm able to remove extra after complete install. I'm glad I ordered the adhesive strips because they were advertised as 'extra' but in fact the replacement comes with none. But yes - good video otherwise.
***** @17323155 Visit our web page. We are factory from China and we wholesale lcd screen, accessories, spare parts replacements for Samsung, iPhone, HTC, Sony ,Nokia, LG, and more. We Are Offering High Quality Products with Best Wholesale Price. here is our email : binqi_lizzy@foxmail.com What’s App: +86 13434766953
Hi! Great tutorial but i have one question! I have vertical lines on my g3 screen and a vertical part of the screen is black. Do you think that warranty will help me? :) Thank you if you answer!
puzzerella ive been having the exact same problem. Im pretty sure youve damged the lcd (the thing directly behind the glass) which sucks because im under the impression that that part is one of the most expensive parts. If you find an easy fix, let me know.
In my situation it wont. Ive ordered a new lcd+screen and I'll let you know how that works out. BTW, I have T Mobile and JUMP insurance, but they're still being dicks because I caused the damage.
there is a gold strip at the bottom of the frame, do you know what that is for? I purchased a screen and frame set but the frame does not have that strip. Idk how this will effect the phone.
hi, my touchscreen and display are fine, I just want to replacement the middle frame..... la pantalla que reemplazas puedo ponerla en otro marco y funcionará? thanks
You can do your best to salvage the LCD and Touch screen but it may get damaged in the removal process. Use your heat gun and work around the unit slowly.
What is the small circuit board located at the base of the frame, to the left of the phone jack? and how does one remove that? I ordered a frame assy w/ the LCD already attached, and it did not come with that circuit board. Any information would be appreciated. Dan
I actually didn't know what it was, but the small little board had adhesive on the backside. I just carefully pulled it off, and placed it into the new frame. I've replaced screens before and it was no easy task--- However this was insanely easy replacing my cracked screen. I will refer anyone who needs it to you guys!
Help. Installed everything the way it should just that can't get it to power on. Will detect the charger tho and displays it when off. But can't get it on did a soft reset and nothing any ideas??
1. will this screen be compatible with a D855 model? 2. i looked at your site and i saw two lcd screens (gold) and one was 84.99 while the other was 114.99. what is the difference between those two screens? 3. if i order the screen, do i get the opening tools used in the video for free?
+shapi27 Your digitizer is most likely compromised/damaged. At times this can happen without no visible damages. You would want an LCD and Touch screen assembly.
I dropped my g3 today and the LCD screen is entirely cracked. It does not respond to my touch at all. So I am going to try to fix this by myself. Hopefully this video could help me up...
So by watching this video and doing some research, I used leftover thermal compound from my computer to put on my lg's cpu due to overheating and it worked!
@Fixez.com Hi, my new screen doesn't stick very well to the main frame.. lightbleed occurs between the main frame and screen.. Is it because I dont put enough sticker between them? or does it happens to u too?
Yes, the most common issue is the adhesive used. Weather to little or the adhesive was not good quality. Use a heat source and hold the location where you see the most light bleed down and see if this helps. Otherwise you will need additional adhesive.
You forgot to mention the little silver ear piece replacement in your video. Otherwise, thank you for the video. My phone is back to normal and working perfectly.
***** there wasn't any inconvenience. I just waned to point it out for others. I would also recommend paying close attention to aligning the adhesive properly. I may have cut a piece incorrectly or something because my screen just barely bumps out about a millimeter in one of the corners. Otherwise, thank you for the product and the video. You're awesome.
Hello my friend Is it possible that the motherboard LG G3 D855 -32GB to fit with LG G3 D852 -32GB I am waiting for your response Thank I wish you success
+Fixez.com My screen was lifting out of the midframe, i used double sided tape to fix this but when i reassembled my phone and turned it on i found that the touch screen was extremely unresponsive, any ideas what went wrong? Thanks
+cam lee The adhesive should not have presented any issues for you. Try resetting the device to see if this helps. You can also double check your flex cables to ensure they are seated properly.
Hi there. I'm a bit confused on what exactly I'm supposed to be buying for my lg g3. I dropped it the other day and it ended up getting a deep cracked spot right on top of where it shows the time(the time while on lock screen) The cracks are spread out around the crack/hole thing like a spider web and there's also cracks that seem to be under the glass that go all the way down almost to the bottom of the screen and they go all the way to the top as well. The whole top of the screen doesn't work and the only numbers that it will let me press on the lock screen are 2,7,9,0 and 5. It can't be unlocked at all. What exactly should I be buying to fix this problem? Thank you!
My Lg G 3´s screen fades/flickers away then after a few min. it comes back to life, but only for a short while...And it heats up quickly as well..What´s your opinion on this issue?
Marino de Oliveira that's a fade screen. I've fixed my uncle's G3 by putting 1 mini sim that cutted to the same size as the CPU and put thermal paste in it. then i put a mini simcard on the metal thing under the camera. and last, i've putted a thick paper on the camera connector. then, force close the back of the G3 and force screwing it. Then, you're done.
Hi! My phone display is damaged, Half of the screen is black and half of it is blurred. Anyone know how much it will cost me to replace it? And what particular part of my phone is to be replace. Thanks!
I replaced my G3 screen and LCD. When I tested it before putting my bottom back plate on, it worked fine. But after I put the bottom back plate it quit responding to my touch. What is wrong?
thanks for the quick reply but i have a couple more questions 1. does your gold look exactly the same as the original? 2. do you ship outside America and if yes, where. 3. i have heard some complaints about unresponsive replacment screens(the touch doesnt work on the lock screen). does your units have this problem too?
***** should there be ANY caution or connection to take apart when removing (4:15) or reinstalling (7:12) the headphone jack or is it just a easy snap off, snap on?
***** Hi! My phone display is damaged, Half of the screen is black and half of it is blurred. Anyone know how much it will cost me to replace it? And what particular part of my phone is to be replace. Thanks!
i got the screen, looked a little sketchy but it worked. i fixed it and it worked beautifully. today i put it innocently on my clarinet case and the screen cracks moments later. the touch works its just now i have a crap ton of lines on the right side of my screen and cant see anything but ROYGBV and black lines on that side . 80 dollars wasted tbh. the shipping went to unecessary areas when i tracked the package. this was a waste of time it feels like. idk this may just be anger but im just a wee bit irritated.
+Kim Chance We apologize to hear about this. The screen should not have cracked on it's on but they are glass and physical contact would cause this. It's unfortunate and again we apologize to hear about this.
Kim Chance This is a Scam night rider company. Use inferior materials and technique. Being a tecnician myself I also notice the very important details of install are missing as are the answers to the patrons questions. Baaadddd company. Stay away. There are much better ones out there. Notice they do massive advertising. Thats because they have no repeat customers.
Not true, IMO. I had it for 3 years with no issues, dropped it several times and it was perfectly fine (no protection whatsoever, btw). It cracked when i leaned on my car's door, with all my weight, trying to get something from the passenger seat (the phone was on my front pocket, so i literally used it as a fulcrum point). I thik any phone would have cracked in that situation.
+Daniel Carroll They would all use the same phillips head screws but it's possible they may be stripped. You may need to apply some pressure and turn slowly to try and remove them slowly.
Thanks for the guide. Worked perfectly for me. Would definitely recommend using this if you have broken your screen and it doesn't respond properly.
I have a small question. I've watched the video and looked through the comments but I cannot figure out how to remove the small board in the lower corner. In fact, I'm not even sure what the board does. Can you offer any guidance?
I have a few question regarding the the screen and frame replacement?
1. Is it required to use an adhesive to replace the the rear cameras,Earpiece Speaker, Vibrator (basically any component taken directly from the housing)?
2. There is a small circuit board that is at the base of the G3 to the left of the headphone jack how would u suggest removing it?
Hi, is the D858HK (LG G3 Dual-LTE) display compatible with the D855 (Standard LG G3) one? THanks
Can the screws fit in any hole that you place them into, or do they need to go back exactly where they came from, I know from the iPhone you have screws that are bigger and smaller, so you have to place them exactly where they came from.
Thanks
Looks like you forgot to put the earpiece mesh back in - however besides from that, best video out there!
What kind of adhesive do you use for this repair? I have 3M double sided black tape. Would this do?
My screen is cracked up at the top and everything above the dragon is no longer touch-sensitive. Is this normal? Or does this change how I need to repair?
Heres a question i havent seen asked or anwered!!
( i have a lg g3 d852(canada version)) and it is cracked screen and digitizer, bezels a little bent,
Can i use a d850, d851, d855...etc screen,digitizer assemby+ frame for a fast fix with no problems?
Or would it have to be a complete d852 repair?
Extremely informative video.
when looking at screens from other sites, i can see that there are different screens available for verizon, T-mobile and AT&T devices. Since i'm in europe i have a device that isn't connected to one of these brands. Will the screens you supply fit for my G3? Or aren't there any differences between these screens? Thanks in advance.
Hi there, I recently got the LG G3 Battery from you guys, but the battery dies very quickly opposed to the one that came with my LG G3. Is there something I should be doing with the battery for optimal performance? Also got a screen from FixEZ too, and it was an easy process. Thank You very much!!!
Awesome, thanks for the help! when i did the screen installation anyways i did one, so i may need to contact them soon. Thanks
Was this an official lg replacement? Or a generic one?
Thank you for the video, are the pieces from your website original and have warranty?
Can these steps be followed for the LG G4 as well? My screen is fine, i just want to replace the bezel, because it is dented.
if i buy the lcd screen with the fram woul di need to use a heat gun? or would i just need to remove the motherboard the earphone and the cameras and put them in the new one?
My screen is cracked from the inside and half of my screen is black with vertical lines would I have to get a new phone? Or would replacing the lcd help?
if i remove a lcd from a working phone ls990, would i have any difficulties removing it without damaging and installing it on my d851 ?
Good video, totally helped me. Though after it was all assembled did I see that the metal screen protecting the ear speaker at the top of the LCD did not get moved from the old to the new - and it wasn't noted to do so in the video. Since it took me 2 hours to do the replacement (my first and I was a bit scared), I"m going to live dangerously and go without. But I recommend you note that in an updated video ... or somehow else.
Dealing with the adhesive strips is a hassle, especially the skinny sides. But I'm able to remove extra after complete install. I'm glad I ordered the adhesive strips because they were advertised as 'extra' but in fact the replacement comes with none.
But yes - good video otherwise.
hello how can such a question is called the double -sided tape they used to paste the display to the device ? and brand, thanks in advance .
Thank you Fixez :)
Hey! :) Where did you buy the lcd display? Thank you!
*****
@17323155
Visit our web page. We are factory
from China and
we wholesale lcd screen, accessories, spare parts replacements for Samsung,
iPhone, HTC, Sony ,Nokia, LG, and more. We Are Offering High Quality Products with
Best Wholesale Price. here is our
email : binqi_lizzy@foxmail.com What’s App: +86 13434766953
Hi! Great tutorial but i have one question! I have vertical lines on my g3 screen and a vertical part of the screen is black. Do you think that warranty will help me? :)
Thank you if you answer!
Uh also another question, what you think that create these lines? Cause i see them the most on in black images
puzzerella ive been having the exact same problem. Im pretty sure youve damged the lcd (the thing directly behind the glass) which sucks because im under the impression that that part is one of the most expensive parts. If you find an easy fix, let me know.
+bobers654 Ok but do you think that warranty will cover it?
In my situation it wont. Ive ordered a new lcd+screen and I'll let you know how that works out. BTW, I have T Mobile and JUMP insurance, but they're still being dicks because I caused the damage.
Perfect! Easy to follow...overall great video.
the screen and the digitizer are both on that piece?
there is a gold strip at the bottom of the frame, do you know what that is for? I purchased a screen and frame set but the frame does not have that strip. Idk how this will effect the phone.
hi, my touchscreen and display are fine, I just want to replacement the middle frame..... la pantalla que reemplazas puedo ponerla en otro marco y funcionará? thanks
You can do your best to salvage the LCD and Touch screen but it may get damaged in the removal process. Use your heat gun and work around the unit slowly.
Just placed my order. Thank you.
leslie stulzer so did the screen work?
Micheal C yes it did
Is it possible to take the screen off without a heat gun?
the top screw on the camera is bigger then the rest btw :)
Can I assume I would use this process to disassemble and just replace the middle housing (which has significant damage)?
+John Pelasio Yes, you can use this guide as a reference point.
+Fixez.com HI can u answer my question hehe
What is the small circuit board located at the base of the frame, to the left of the phone jack? and how does one remove that? I ordered a frame assy w/ the LCD already attached, and it did not come with that circuit board.
Any information would be appreciated.
Dan
I actually didn't know what it was, but the small little board had adhesive on the backside. I just carefully pulled it off, and placed it into the new frame.
I've replaced screens before and it was no easy task--- However this was insanely easy replacing my cracked screen. I will refer anyone who needs it to you guys!
does it matter if i have an AT&T g3?
Many thanks this helped a lot!
+Cookiemonza1 You're welcome, thank you for watching!
GI, got an lg g3, screen responds but is cracked screen what parts should I get
how thick is the adhesive tape
im going to walmart to buy adhesive for my lg is there any kind you can recommend thats from there?
+NewYorkNate {} 3M adhesive would be best recommended.
Thanks for the tutorial!
Help. Installed everything the way it should just that can't get it to power on. Will detect the charger tho and displays it when off. But can't get it on did a soft reset and nothing any ideas??
Wonderful and clean.
1. will this screen be compatible with a D855 model?
2. i looked at your site and i saw two lcd screens (gold) and one was 84.99 while the other was 114.99. what is the difference between those two screens?
3. if i order the screen, do i get the opening tools used in the video for free?
***** please guys, i really need your help here
***** thanks. i placed the order recently
***** the screen works perfectly. thanks
hi! What if there is no obvious physical damage to the screen following a drop .. however the touchscreen is not in working order?
+shapi27 Your digitizer is most likely compromised/damaged. At times this can happen without no visible damages. You would want an LCD and Touch screen assembly.
Thanks!
I dropped my g3 today and the LCD screen is entirely cracked. It does not respond to my touch at all. So I am going to try to fix this by myself. Hopefully this video could help me up...
Thanks for your video!!!
+Patricio Aedo You're welcome, thank you for watching!
My g3 screen is lifting up on the right side, Light bleeds through the edge of the screen what can i do
can i replace verizone lg g3 digitizer with international digitizer ?
So by watching this video and doing some research, I used leftover thermal compound from my computer to put on my lg's cpu due to overheating and it worked!
+jake “Sly” lyon Glad to hear we could assist you here. Thank you for watching!
What if I put the tape on straight on the back will it still work?
+cain benzing It isn't really advised. It's possible the adhesive could affect the backlight and be visible in the display.
@Fixez.com Hi, my new screen doesn't stick very well to the main frame.. lightbleed occurs between the main frame and screen.. Is it because I dont put enough sticker between them?
or does it happens to u too?
+Fixez.com please reply
Yes, the most common issue is the adhesive used. Weather to little or the adhesive was not good quality. Use a heat source and hold the location where you see the most light bleed down and see if this helps. Otherwise you will need additional adhesive.
***** does it happens to u? i mean the light bleed.. because mine is being repaired by amateur..
It can occur but we do our best to avoid this issue when repairing the device.
You forgot to mention the little silver ear piece replacement in your video. Otherwise, thank you for the video. My phone is back to normal and working perfectly.
***** there wasn't any inconvenience. I just waned to point it out for others. I would also recommend paying close attention to aligning the adhesive properly. I may have cut a piece incorrectly or something because my screen just barely bumps out about a millimeter in one of the corners. Otherwise, thank you for the product and the video. You're awesome.
Lg G3 lcd and touch New price plz
Hello my friend
Is it possible that the motherboard LG G3 D855 -32GB to fit with LG G3 D852 -32GB
I am waiting for your response
Thank
I wish you success
+Fixez.com My screen was lifting out of the midframe, i used double sided tape to fix this but when i reassembled my phone and turned it on i found that the touch screen was extremely unresponsive, any ideas what went wrong? Thanks
+cam lee The adhesive should not have presented any issues for you. Try resetting the device to see if this helps. You can also double check your flex cables to ensure they are seated properly.
Hi there. I'm a bit confused on what exactly I'm supposed to be buying for my lg g3. I dropped it the other day and it ended up getting a deep cracked spot right on top of where it shows the time(the time while on lock screen) The cracks are spread out around the crack/hole thing like a spider web and there's also cracks that seem to be under the glass that go all the way down almost to the bottom of the screen and they go all the way to the top as well. The whole top of the screen doesn't work and the only numbers that it will let me press on the lock screen are 2,7,9,0 and 5. It can't be unlocked at all. What exactly should I be buying to fix this problem? Thank you!
My Lg G 3´s screen fades/flickers away then after a few min. it comes back to life, but only for a short while...And it heats up quickly as well..What´s your opinion on this issue?
It sounds like there could be a short. Has the phone been previously repaired? Has it been wet?
Marino de Oliveira that's a fade screen. I've fixed my uncle's G3 by putting 1 mini sim that cutted to the same size as the CPU and put thermal paste in it. then i put a mini simcard on the metal thing under the camera. and last, i've putted a thick paper on the camera connector. then, force close the back of the G3 and force screwing it. Then, you're done.
Marino de Oliveira and put that mini cutted sim under the processor.
Marino de Oliveira My wife's G3 has the same issue. Not sure if it's a bad LCD or an over heating issue? Any thoughts?
Help me please, I've just done it but can't see display. but I can get a call. it works but only can't see the display. what's wrong?
great video
Hi! My phone display is damaged, Half of the screen is black and half of it is blurred.
Anyone know how much it will cost me to replace it?
And what particular part of my phone is to be replace. Thanks!
great video helped alot :D
i send my phone to a lab to replace the screen and i think they used glue somehow.. is ?that ok? or may it cause problems in my phone in the future?
+אלינה קריגל It varies what sort of adhesive. It may not if used properly.
I replaced my G3 screen and LCD. When I tested it before putting my bottom back plate on, it worked fine. But after I put the bottom back plate it quit responding to my touch. What is wrong?
+Thomas Ballard It's possible that if the tape over the LCD ribbon wasn't replaced or if it was misaligned, that the LCD ribbon is being shorted.
+Fixez.com Yes I figured it out thank you this really did help. I realized that that was the issue.
I don't have the table to cover it what do i do?
can you do it without buying a new adheasive?
ITS ME BITCH! use a double tape
i want a gold replacement screen and i dont see any on your website. where can i get one?
thanks for the quick reply but i have a couple more questions
1. does your gold look exactly the same as the original?
2. do you ship outside America and if yes, where.
3. i have heard some complaints about unresponsive replacment screens(the touch doesnt work on the lock screen). does your units have this problem too?
***** oh and do you do returns?
please, i would really appreciate an answer soon because i am running out of time. thank you
thank you so much. you have a new customer :)
thanks you my friend
my lg g3 lcd screen in lifted up do i need to replace it with a new one or there is another fix ????
+Malek Boudiad If the display is still working you can always replace the adhesive and reuse it.
This video was so helpful. Thank you!!!!! A*****++...
the video was really helpful and all but i just wish the price of the screen digitizer should be $50
***** should there be ANY caution or connection to take apart when removing (4:15) or reinstalling (7:12) the headphone jack or is it just a easy snap off, snap on?
mine does not turn on I did everything on ur video and it doesnt turn on what do I do??
+Irma Gonzalez Double check your flex cable to ensure it's seated properly. If the issue continues, it's possible your LCD is defective.
I ordered my replacement a week ago and still have not received it. I paid for 3 day shipping also. So far im not trusting this site.
if i change the display i will loose all my data??
*****
Hi! My phone display is damaged, Half of the screen is black and half of it is blurred.
Anyone know how much it will cost me to replace it?
And what particular part of my phone is to be replace. Thanks!
John Albert Villanueva at least 120
Can I have a subtitle of this video? I am a international student from South Korea I cant always understand what he said.
+Damien Na There is a subtitle option on the video, select the button and it will allow this feature to work.
Yes both things..
U never removed the slither of logic board right at the bottom of the device...
No mate look it up logic boards are found in all microcomputers such as phones
i got the screen, looked a little sketchy but it worked. i fixed it and it worked beautifully. today i put it innocently on my clarinet case and the screen cracks moments later. the touch works its just now i have a crap ton of lines on the right side of my screen and cant see anything but ROYGBV and black lines on that side . 80 dollars wasted tbh. the shipping went to unecessary areas when i tracked the package. this was a waste of time it feels like. idk this may just be anger but im just a wee bit irritated.
+Kim Chance We apologize to hear about this. The screen should not have cracked on it's on but they are glass and physical contact would cause this. It's unfortunate and again we apologize to hear about this.
Kim Chance This is a Scam night rider company. Use inferior materials and technique. Being a tecnician myself I also notice the very important details of install are missing as are the answers to the patrons questions. Baaadddd company. Stay away. There are much better ones out there. Notice they do massive advertising. Thats because they have no repeat customers.
you forgot to to take off the speaker cover from the broken screen and put it on the new screen...
Goooooood
U use a tool to open the backcover??? Lol
No problem good video!
goddammit LG why make it so complex 😡
You serious? This is as easy as it can get.
Lg g3 is worst phone iv ever owned. Broke 2 screens in 2 weeks just from being in pocket . Very breakable screen with 0 flex
Not true, IMO. I had it for 3 years with no issues, dropped it several times and it was perfectly fine (no protection whatsoever, btw). It cracked when i leaned on my car's door, with all my weight, trying to get something from the passenger seat (the phone was on my front pocket, so i literally used it as a fulcrum point). I thik any phone would have cracked in that situation.
Can you help me? I have an LG G3 and I removed about 6 screws from the back with a ph #00 screwdriver but the rest won't budge.
+Daniel Carroll They would all use the same phillips head screws but it's possible they may be stripped. You may need to apply some pressure and turn slowly to try and remove them slowly.