I watched this video with great interest because that strip on my Volvo XC90 are all failing and I needed to do something about it. I think I would have left the black vinyl strip on the trim. I’m going to black out all my chrome trim and rims for a new look but I don’t want to spray paint them. Probably I will end up covering it with vinyl tape.
This video may have saved my marriage lol! My wife has been on me about replacing the weather stripping on the doors of her 07 CRV since late last summer. This video was the best I found on how to easly quickly replace them. Thanks!
When ordering replacement parts I read reviews that said there were instructions on TH-cam and called out that you must remove the side mirror. This was EXCELLENT tutorial that even a non-technical guy like me can follow, down to using the microfiber towel to protect the door paint from the disassembled side mirror. Make sure you use a good trim tool like the one in this video.
Thank God for this video because my ones need to be replaced and because of the water going through it damaged all my door speakers that I just replaced! So lesson learned 😤
I like your video I didn’t know you could replace the weatherstripping moldings on this car now that I looked it up thank you I am going to buy me some new weatherstripping for my 2010 Honda CRV EXL
Thank you Sir, but you did it very easily, if I try it, it won't be as easy. I wish your workshop was in my city. I can't find these weatherstripping even on Amazon for Honda Odyssey. Thank you
Thanks this helped a lot. My only mistake was waiting until after the driver's window trim was installed before removing the plastic protective film on the new trim. One also has needs to compare the new and the old trim tab locations on the rear window trim as both have the same end cap slants on them. Now I need to find a video on how to replace the exterior trim on the trunk windows. I am very disappointed on all the problems we have had with the CRV to include paint failing at 10.5 years, wheel bearings, tire sensors, speakers... I'm done with buying Honda.
Awesome video ! Well done! My 2007 crv needs all weather stripping around windshield as well and rear window . Do you have other videos on how to? Thanks !
Bro!! Searched all over to find a video like this! Gracias! Hey I'm assuming that the process is the same for Odyssey. I'm gonna make a video to help others like you did for me. 👍
This is one of the best how-to videos I have ever watched. Thanks. Great job. Question: Should I go with Honda OEM of the less expensive after market ones?
Great tutorial! Replaced the drivers window however the green clips just won't snap into place...black clips are in but there is some wiggle where the greens are. Any suggestions?
I have seen and read some aftermarket suppliers dint clip in well or weather felting does not seat at window...can you specify where to get the parts from?
Not replacing these can lead to a wet floor after a heavy rainfall. Check your floors for dampness after heavy rain. Your back carpets may be wet and you don't even know it. Also smell for mold near the carpet area.
This video was perfect!! I’m a 47 year old female and was able to do this with your instructions. My old pieces didn’t pop off so easily though, what is the window tool kit that you use? Next up is my daughters 2013 Honda Civic...is it the same process? Thanks again!!!
Anyone have a link to these exact ones? There are a few options, some that people say are not the right length, so I want to make sure I get ones that will work. Thanks.
Hard to say. However, when installing , the only way to do it properly is to remove the door panel to get the clips to lock in properly. @@projectnerdvana2820
Thanks for sharing this. Great info! I just bought some replacement strips and was wondering how to get the fronts on. Will a plastic spudger from a smartphone repair kit work for prying off the mirror cover and old strips?
Better thing to do is get a plastic pry tool (kit) from any auto parts store or online. They are really cheap and can reduce the chances of damage to the paint.
Agree, absolutely no need to remove door panel to replace these belt moldings (unless you break either of the front or rear black clips during removal and allow it to drop down inside the door). It’s sad Honda used such poor quality rubber that didn’t hold up with time against sunshine & ozone. My 10 year old Nissan Altima’s are still in great shape.
Excellent. Not a lot of unnecessary stuff at start, no annoying music, just a simple, straight forward, to the point "how to" . Bravo
Yes, you're right, I hate those annoying music at the startup.
Thanks 🙏 feel free to follow me on instagram www.tiktok.com/@sermarle_20?_t=8pRjdDlVQXW&_r=1
Thank you for giving this girl the confidence to do it herself!
Bruh this video was perfect. Got mine swapped out in less than 10 min thanks to this video. Made a huge difference!!!!
S JP 💪👍
I watched this video with great interest because that strip on my Volvo XC90 are all failing and I needed to do something about it. I think I would have left the black vinyl strip on the trim. I’m going to black out all my chrome trim and rims for a new look but I don’t want to spray paint them. Probably I will end up covering it with vinyl tape.
This video may have saved my marriage lol! My wife has been on me about replacing the weather stripping on the doors of her 07 CRV since late last summer. This video was the best I found on how to easly quickly replace them. Thanks!
O wow nice 👍🔥🔥🔥😎 thanks 🤝
I tried to replace the weather strips without removing the mirrors. You have to remove the mirrors
😅
When ordering replacement parts I read reviews that said there were instructions on TH-cam and called out that you must remove the side mirror. This was EXCELLENT tutorial that even a non-technical guy like me can follow, down to using the microfiber towel to protect the door paint from the disassembled side mirror. Make sure you use a good trim tool like the one in this video.
instagram.com/s.p.j2022?igsh=OGQ5ZDc2ODk2ZA%3D%3D&
Excellent video bro that’s exactly what people is looking for fast to the point…
Outstanding video. Thank you for taking the time to explain replacing these parts so clearly!
Just did my 07', I believe they were the original and they were hella hard to get out :) but we got em' - thanks!
Good job. Clear, concise & to the point. Thanks pal.
Many thanks for a straightforward and very clear description.🙂
Thank God for this video because my ones need to be replaced and because of the water going through it damaged all my door speakers that I just replaced! So lesson learned 😤
Great job. Could not have done this without your video.
instagram.com/s.p.j2022?igshid=OGQ5ZDc2ODk2ZA%3D%3D&
Man this is the best video. Straight to the point. Great explanation! Thank you!!
Just the info I needed!! No bs’n around!! Great video!
instagram.com/s.p.j2022?igshid=OGQ5ZDc2ODk2ZA%3D%3D&
U the man!!!! Thanks so much, straight up to the point!
Thanks so much! This was extremely helpful and showed me everything that I needed to perform the work.
I like your video I didn’t know you could replace the weatherstripping moldings on this car now that I looked it up thank you I am going to buy me some new weatherstripping for my 2010 Honda CRV EXL
Thx for sharing this video. I was in the impression of taking the door panel as per instructions from the service manual.
CRISPA1 Good deal you’re going to save time now👍
Same here. Thanks for the video. Going to save a lot of time now.
thanks so much. I don't know if I can do for myself, but now I know EXACTLY what I need to do!
Feel free to follow my Instagram for any questions or help instagram.com/s.p.j2022?igshid=OGQ5ZDc2ODk2ZA%3D%3D&
Thank you for posting this. I just ordered the part and hope to try this over the weekend. Again, thank you.
Thanks for the simple straightforward video. 👍
Sure no problem feel free to follow me on Instagram. www.tiktok.com/@sermarle_20?_t=8pRjdDlVQXW&_r=1
really good information,i was like really worried how to fix that on muy car now i know thanks to this video.
Thank you Sir, but you did it very easily, if I try it, it won't be as easy. I wish your workshop was in my city.
I can't find these weatherstripping even on Amazon for Honda Odyssey.
Thank you
Nice, this is the DIY Video that I search. Thanks Bro, God bless
just what I was looking for. Was told to take to a detail shop but that costs a LOT.
Thanks for video bro! Those stock moldings are basura!!!!!
Awesome video sir simple to the point
Thank you so much for sharing your knowledge. They wanted to charge me $100 per window. I'll pay less than $50 for the parts and sweat equity.
🙏
where please send a link
Super helpful video man! Thanks much!
instagram.com/s.p.j2022?igshid=OGQ5ZDc2ODk2ZA%3D%3D&
Thanks for the clear instructions - very helpful!!
Good video. Honda whatever has cheap window seal. I also have a 20 plus year old Toyota. Original strips
Молодец! Показал все нормально и понятно,а то другие снимать видео не умеют и покажут только заднюю
Thanks this helped a lot. My only mistake was waiting until after the driver's window trim was installed before removing the plastic protective film on the new trim. One also has needs to compare the new and the old trim tab locations on the rear window trim as both have the same end cap slants on them. Now I need to find a video on how to replace the exterior trim on the trunk windows. I am very disappointed on all the problems we have had with the CRV to include paint failing at 10.5 years, wheel bearings, tire sensors, speakers... I'm done with buying Honda.
Lol @ being upset with maintenance at 10+ years
We're just considering a replacement for a 2001 CR-V we've owned from new. It hasn't missed a beat in 23 years.
Awesome video ! Well done!
My 2007 crv needs all weather stripping around windshield as well and rear window . Do you have other videos on how to? Thanks !
Very nice job on this video. Thanks. Have you done a DIY video for the door seal inside the door opening. I need to replace that seal.
Greetings, and thanks for the great video. Would you tell me where you bought the trim? Thanks
Excelente explicación, muchas gracias.
Thank you a lot.I learned some from this video
Thank mate, your video is clear and helpfull..
thanks for the video, what did you take to remove and clean before install the new one
Awesome video! thanks man :)
instagram.com/s.p.j2022?igshid=OGQ5ZDc2ODk2ZA%3D%3D&
Very nice video I’m just wondering would it be the same procedure for a Mk2? Thanks
I found out the hard way it's not there's a screw at one end and that caused a big problem
Bro!! Searched all over to find a video like this! Gracias! Hey I'm assuming that the process is the same for Odyssey. I'm gonna make a video to help others like you did for me. 👍
Thanks bro, I was about to take the dang door panels off. I couldn't find the molding trim for my Ody though, I could only find the rubber parts.
This is one of the best how-to videos I have ever watched. Thanks. Great job. Question: Should I go with Honda OEM of the less expensive after market ones?
The aftermarket work perfectly
I though it was more too it. Good looks, I appreciate it.
Gracias. Vos sos chingon!
Excellent video....thank you sir!
instagram.com/s.p.j2022?igsh=OGQ5ZDc2ODk2ZA%3D%3D&
Great video. Thank you for taking the time to explain replacing these parts! Is there a method for leaving a $ thanks?
Nice presentation 👏 👌 👍
Salute bro I see your channel getting bigger
The Mel Man Yes sir for sure is growing bro
What tool kit are you using to do the job where can I get that kind of tool kit thank you
Great tutorial! Replaced the drivers window however the green clips just won't snap into place...black clips are in but there is some wiggle where the greens are. Any suggestions?
Great tutorial. Simple and to the point. What's the part number for the strips? 05 Honda crv ex
Apprecite this video. What do you call the plastic tool set you have used to remove the weatherstrip?
I think they’re calles Plastic Pry tools
I have seen and read some aftermarket suppliers dint clip in well or weather felting does not seat at window...can you specify where to get the parts from?
Not replacing these can lead to a wet floor after a heavy rainfall. Check your floors for dampness after heavy rain. Your back carpets may be wet and you don't even know it. Also smell for mold near the carpet area.
Where can I get that plastic tool you used to snap the molding off of the door ?
Sorry if this is a silly question, but what is the tool kit that includes the tool to remove the old weatherstrips?
Thanks for posting!
instagram.com/s.p.j2022?igshid=OGQ5ZDc2ODk2ZA%3D%3D&
Have you ever replaced the tailgate weatherstripping on the CRV?
This video was perfect!! I’m a 47 year old female and was able to do this with your instructions. My old pieces didn’t pop off so easily though, what is the window tool kit that you use? Next up is my daughters 2013 Honda Civic...is it the same process? Thanks again!!!
Wow very amazing you did it 💪👍 you save money like this . two thumbs up
S Perez thank you!!! Do you happen to know if it’s the same process for a 2013 Honda Civic?
...............................Thank you so much........................💜💜💜💜💜💜
Thanks a lot for the tutorial
Nice thanks bro! Did you replace with those aftermarket from eBay or OEM? Maybe after market last more 🤔?
Aftermarket that’s what the customer wanted
@@sperez6140 Hi, great video. Where can I get these moldings after market for Honda Accord 2012 sedan?
Does the 1st gen crv have this weather strip? Mine doesn't seem to be interchangeable.
Shoot, the mirror bolt felt into the door. Other that that, worked smoothly.
Same, did you have to take off the door paneling to get it out? 😭 I think I will have to do that
@@sheluvsmenotu I left it in there. Just buy another bolt and don't worry about it.
@@BruceRicard What if im not sure what type of bolt it needs? Sorry im not really a mechanic or anything, how could I go about finding the specifics?
Really helpful, thanks.
Thank you very much ❤
Perfect . Thank you!
Where did you order the parts from?
Thanks, homie!👍🏽
Anyone have a link to these exact ones? There are a few options, some that people say are not the right length, so I want to make sure I get ones that will work. Thanks.
Do you happen to know if it’s the same with a 2017 Honda CR-V?
What do you call on the tool that you used to removed the weather strip? Thank you!
I think it’s called Plastic Pry Tools.
What are these called as I am trying find them on line but I want to make sure I am getting the right thing. Mine is a 2006. Thanks
Exactly what you see here on the video title you can find it like that on eBay
@@sperez6140 Why are the ones on ebay not OEM? I was trying to find OEM repacement strips
@@LarryRichelli why go OEM if you know what's gonna happen? Try the aftermarket maybe it last longer.
Hi man, where did you get this part? If you have link please
where did you buy the moldings?
EBay
Thanks appreciate you!
Where did you get the new strips?
instagram.com/s.p.j2022?igshid=OGQ5ZDc2ODk2ZA%3D%3D&
eBay
Where can I buy these parts for my 2006 honda accord? Does anybody know?
ebay
@@PaulSmithDYL you think the aftermarket one's on eBay might be better or will eventually crap out too?
Hard to say. However, when installing , the only way to do it properly is to remove the door panel to get the clips to lock in properly. @@projectnerdvana2820
I did not have to remove no door panel at all, everything was installed properly don’t see the point of removing the door panel sir
Simple! Thanks!
Link? Where to order
Thank you my man
Thanks for sharing this. Great info! I just bought some replacement strips and was wondering how to get the fronts on. Will a plastic spudger from a smartphone repair kit work for prying off the mirror cover and old strips?
Better thing to do is get a plastic pry tool (kit) from any auto parts store or online. They are really cheap and can reduce the chances of damage to the paint.
Where did you buy the replacement parts?
does this work the same for a crv from 1998?
Nice!👍🤙🤙
instagram.com/s.p.j2022?igsh=OGQ5ZDc2ODk2ZA%3D%3D&
You didn't give a link for the parts!!!
Thank you, doing this soon.
Done. Thank you for leading the way. So much better and my windows quit rattling when I shut the doors.
Thanks helpful video
That was pretty excellent.
Nice job, thank you!!!
Thank you!!
Is this the same process for a honda accord
Is it the same process on a 2012 Honda Accord SE?
be sure to place the new one in nice and slow and gently just like the video
Good job 👍
Dont take it off the black covet it looks cool❤❤
Agree, absolutely no need to remove door panel to replace these belt moldings (unless you break either of the front or rear black clips during removal and allow it to drop down inside the door). It’s sad Honda used such poor quality rubber that didn’t hold up with time against sunshine & ozone. My 10 year old Nissan Altima’s are still in great shape.
Does anybody know how to do this on a 2nd Gen CR-V?
Hell yeah thanks