How to Fix the Ice cube Tray in the Ice Maker in a Samsung RF 266 Refrigerator
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- In 2011, I made a video on how to fix your Samsung freezer, where the ice was coming out in big chunks. Mine broke again, and a different part broke, the tray that twists and holds the cubes broke. Here's how to remove the broken one and replace it. Skip to 2:33.
Here's the original video I reference: • How to Fix a Samsung R...
Find Samsung Parts here: amzn.to/2OJ5cbc
If I saved you a service call or a lot of headache. consider sending $1.00 to me via Venmo: "tonyveroeven"
It’s been seven years but your video helped me fix my mothers freezer and saved me from calling someone to fix it. Thank you for posting!
You’re welcome!
OMG you help me so much!!! the ice motor fell off and I couldn't put it back I searched and searched and finally, someone shows how to insert it back, that's all I need it! thank you!!!
So glad this helped you Patty!
Between this video and your earlier one, you have saved me over $300. THANK YOU.
My pleasure!
thank you thank you thank you. My dad was so mad at me when I accidentally messed this piece up. Now its good as new.
Thanks for the video. I was able to reset mine because of your detail on how to take it apart. Before taking it apart, there is a button right in the center of the bottom of the front side of the ice maker. Holding it in will activate the complete cycle of dumping the ice and filling the tray with water. In my case, everything worked but the water fill. The end of the fill tube had frozen water make an ice obstruction that had to be cleared. I broke off as much as I could and using a flat-head screwdriver to clears out the rest. Of course, I had to wait for a bit in-between for the ice obstruction to melt a bit. Still waiting to see if it will complete the cycle before declaring it fixed. Thanks again!
Thanks for that level of detail Mike! I hope that it helps the next person!
After I saw the 2 screws the job became a lot easier. Thanks, we have ice again.
Now I know how to remove the entire unit (since we don't have our fridge plumbed and rarely need ice). Thanks!
How do you take the whole piece out nine is not connected
Wow, I was trying to figure out my moms lower ice maker and glad you
Posted this. I was looking in once I got everything g defrosted and thought there were two ice trays, one with an electrical cord hanging off but it was actually the one trey broke in half. If I can find another ice trey like she needs I will be viewing this again. Thanks for posting
This is the exact problem I had. This vid was the most helpful out of many others. I found a good way to keep ice from building up under the bin and causing the Maker to slam against the bin/drawer is to just duct tape the top of the back of the bin to the drawer. It isn't pretty, but how many people are going to look at the far back of the freezer drawer?
Thanks for your comment and contribution! Glad it helped.
Thanks for the video! I was able to change out .my broken icemaker within 15 minutes and saved me hundreds of dollars from calling out a technician! Thanks a bunch!
Tony - you are the GOAT !! Thank you. Fixed in 15 mins
Thanks man! Glad I could help!
Seriously? I watched this entire video TO FIGURE OUT WHERE TO PUT THE SENSOR. But you're punishing me because I haven't seen your video from two years ago! You're killing me Tony!
th-cam.com/users/veroevenvideos
Thanks for showing how to remove the entire unit. I never need ice and this thing just gets in the way.
My pleasure! Good luck!
Wow Thanks! and thanks for the other samsung fridge video about the dripping water in the crisper drawer. Fixed both problems this afternoon thanks to you. :)
Extremely helpful. Saved me a service call. Thank you
Thank you for your video. My new tray should have arrived by the time I get home so this video will be a great help with this evening's repair.
Hopefully it went well!
John Ormsby もてねもにふぬへつひひはのへなひにほへふもひひにひまなはたたな
Thank you so much Tony! I just got a Samsung fridge and I'm dealing with a similar problem, you help me get it out at least 👍👍
John Caleb Warren glad to help!
I don't see your video on where the sensor goes, did you remove or delete the video? I need to know where that goes...
Here you go: th-cam.com/video/olMUPGzoxQo/w-d-xo.html
Dude, this video was awesome and yes, I watched your previous video a few years back. So, I created a video on installing a pedestal sink. It's just passed 26,000 views. I think people really appreciate a do it yourself'er taking the time to shoot a video. You are currently showing 90k+ views and you should have an equal number of thumbs up! Well done.
Super thanks. Didn’t find this anywhere.
Have you had the issue of where it looks like the tray is filling up with to much water? That's my issue and it comes out stuck together the way it forms in tray.
That’s the symptom of the sensor not being in place.
Seriously the most helpful video I've watched. You saved me a ton of money!!!
Glad I could help!
Isn't there an arm that registers the ice tray is full so this doesn't happen? Or is this before they implimented this design I mentioned?
hi tony, thanks for the great video on RF266 ice maker issues. we have the same model which now has problems. you mentioned the other video that described the loose sensor wire that was dangling? couldn't seem to locate the video on you channel. could you give a brief description of where it goes. thanks so much for making the videos.
Thank you for the video. This is awesome and pretty cool.
Is their an on/off switch foe this ice maker? We bought a brand new one ,it tested fine but still won't make ice
For my model all of the buttons for the refrigerator controls are at the top of the fridge inside the door. They control the icemaker, the freezer temp, the refrigerator, temp, power, cooling, etc..
Dumb question, but is it hooked up to water?
How can I remove the bottom drawer so I can sit and have room to work with?
Thank you
Everything seems to work with the motor turning, but the only way I can get the ice to release from the tray us to use a hair dryer to warm the tray, then it will go through the entire cycle of ejecting ice and refilling. Is the sensor the problem?
maybe the motor is not twisting it enough. Cheapest best fix may be to replace the entire ice unit.
Thanks for the informative video Tony but what happens when you put the parts back together, the ice tray fills with water, but doesn't dump the ice out? It's been 8 hours. I verified there is ice in the tray.
Rich, ensure that your "ice off" button isn't pressed. Control panel for fridge and freezer on mine is at top when I open the doors. If that's not the problem, then click the reset button on the bottom of the ice maker. Should perform an ice cycle.
@@tonyveroeven mines is a different model,tray is stuck on emtpy,when I got reset,but also,water will not fill
@@tonyveroeven i have done this, When i pressed the test button, it dump the ice. but the fridge still it doesn't dump the ice automatically.
@@haiiqbal check the “ice off” button
Have you ensured the sensor is seated in the foam and the housing is in place?
You saved my ice maker!
Thank you very much. Your video help me a lot !
Thank you this helped me fix my fridge
fantastic! Glad I could help!
Love it you are awesome God bless you my son and me fix it together
Thanks, helped us save our fridge!
Hey Tony! Thanks for the vid. Is there any way I can just turn off the ice maker in the freezer compartment? I was looking for some sort of off switch down there but couldn't find anything.
Jordan, potentially. On my model, I have a panel above the fridge, found whend you open the refrigerator doors (not part of the freezer drawer.)
There you might find temperature adjustments for the both the refrigerator and freezer, "power cool" "power freeze" "ICE OFF/ON"
Let us know if you have a similar layout.
Do I have to turn off the water supply, or can I just use the "ICE OFF" button at the top of the refrigerator?
Just click the ice off button. Or if you feel lucky, leave it on!
This looks to be the same ice maker as on my LG fridge freezer. Thank you for both vids. By far the most helpful of the 20 I watched today. mine works, but since replacing an inline filter a while ago, ice cubes are too big and staying stuck in groups of 2 or 4. I'm thinking more water flow is causing this since my old filter was more than too old. Any idea how to make cubes smaller?
John, For me, the problem was the foam insulator was not on the temp sensor. See if yours has a similar setup. I imagine they all are basically the same technology. If so start by ensuring that the foam insulator is in place.
I have this same fridge but there is a problem with the water not going into the tray as it just runs out and drips down the back of the fridge.
Hey Tony. TY for the reply. All the above was checked. In fact after defrosting the fridge, the motor is silence, the ice maker on top works well, however the water does not dispense in the freezer chest (bottom) area. You think the line into the Freezer section frozen? Please advise TY
Can you remove the ice maker in the bottom? it may give you some clues.
So helpful. Thank you
Good afternoon Tony.
I have a similar situation. The Ice tray motor has not flipped when the tray is full. Im currently defrosting the Refrigerator. Can you please advise what should be my next move. TY
Jesus Soto be sure to check the obvious that the “ice off” button is not “on”
Great video. Thanks
thank you so much for this video. Very hard to find freezer ice maker stuff. Question, what does the curved lever on the left side of the ice maker do. I want to shut off the ice maker to make more room for food. Thanks
philipfm there should be a panel at the top of the fridge. (when you open the French doors) you will see temperature controls, ice control, power cool for both the freezer in the refrigerator... you should be able to turn the ice off on one of those buttons.
thank you, I have a digital display on the out side. Pushing the buttons the display showed two boxes marked ice on the top and the other box with ice on the bottom. think I got it now. I am hearing a light clicking sound, I assume its the ice maker shutting down. I hope LOL
Good Luck!
Thank you so much!
Where do you get your parts? I haven't been able to find your link. Do you buy the whole assembly or individual parts?
Thanks
Check the description in the original video:
th-cam.com/video/olMUPGzoxQo/w-d-xo.html
Hi Tony - thank you for your video. You mention a video from 4 years ago and I can't seem to find it. The video that addresses the thermostat. Help please! Thank you!
It pops out in the upper right corner a few seconds in. Sorry th-cam.com/video/olMUPGzoxQo/w-d-xo.html
Thank you Tony!
Gerri Songer you're welcome!
Thanks - great video - very useful
Thank you Jonathan!
I am having the same refrigerator as yours, but the icemaker is not making ice cube because it is not refilling water now. I checked everything looks good but just not refilling, so what should I do?
Check to make certain the foam piece is in place, else the temperature gauge sensor won't work properly.
Mine isn’t filling with water. The foam cushion is in place. What should I try next? Thanks.
shut your freezer its beeping..loli have the rf217 but same ice maker, i have a tab broken to keep the box thingy up there so put the cover on the end to hopefully keep it up there, watched another video didnt know the thermonoter went into the foam thing so its there now..
My refrigerator makes ice but water keeps running over the tray??
Look at that sensor, I bet it is not seated in the foam. Find the other video about fixing it in my other videos in my channel.
Thank you
I have a Samsung Refrigerator model # Rs261MDPn and it won’t come out of the door 🤦🏼♀️
Can someone HELP PLEASE
Thank you in advance
we have our replacement ice cube maker in, but we have lost the screws. when we contacted the parts they said that the screws are part of the refrigerator and part of the ice maker. would you happen to know what kind of screen are needed?
Sorry I don't understand what you mean by, "screen?" Autocorrect error?
I think he meant screws, which I am trying to figure out also. Contacted Samsung but no reply so far. I lost the screws that connect the icemaker to the top of the freezer. Any idea what would work? @@tonyveroeven
You might try www.samsungparts.com Or you might buy several sizes of screws from the hardware store for a bit of trial error if you want to drive yourself crazy.
You might try www.samsungparts.com Or you might buy several sizes of screws from the hardware store for a bit of trial error if you want to drive yourself crazy.
Thanks a lot (Muchas gracias).
Does anyone else have the problem of the arm not hanging low enough to actually shut the ice maker off? I have to turn ours off manually when it is full so ice doesn't spill out into the freezer.
Can you just take it off my ice maker is not connected to water
My ice cube is fall in the ice tray its beke freezer
Howe can i fix it ??
Not sure if I understand exactly what problem you’re having but look at all of my videos and look at all of my freezer related videos.
@@tonyveroeven i looked at all the videos and Im trying to twist the sensor and i’m waiting for the result
Hood afternoon Ton
nice
I dont get why You do the repair INSIDE Your fridge... take it out, and close the doors, until Your are ready to mount it again.
Because then you wouldn't have gotten to see the removal, where the screws and mounts are, and the perspective of the ice maker in its place. And because I could. :)
I'd like to give some constructive feedback to the video maker-poster. Watching the video, I became so distracted with you talking about how many views you got on these video(you said this multiple times) that I gave up on your video and went to another where the guy wasn't talking about his view count. Really really threw me off. Just really, really annoying man.
I appreciate that. I was just amazed that lil ole me made a random video that helped so many people. That's all I was trying to convey.