Hi Devin... Thank you for showing us how the ice maker works in action. I don't see this very often in repair videos, and it helps in understanding what may be going wrong to produce the symptoms that I see. Very helpful.
Thank you so much for the step by step instruction on repairing the ice maker! It worked like a charm and now I have ice again. I had torn the freezer apart the day before and never saw the Reset button! I used the hair dryer, removed the existing ice form the tray, pressed the reset and Voila! Up and running. I will share that the reason mine froze up is because we had some items on the very top shelf of the freezer that were blocking the cold air vent. Caution everyone, keep those vents clear from obstruction. 😀
Devin! You are my husband's hero! Thanks for helping make my family self sufficient this evening. I was able to find your video and your recommendation worked! It saved my husband a headache and thwarted my attempt at getting a replacement fridge.
instructions worked like a champ for this type of LG refrigerator and Ice maker type. Pulled out the wife's hair dryer and thawed the Ice tray for a bit. Hit the reset button and now waiting for correct Ice to be made. Thanks DurbinCompound
Thank you!! Thank you!! Thank you!! I knew about thawing out the components with a hair dryer, but I had no idea about the reset button!! This has been driving me crazy for months!! Your video saved the day!!
Many thanks for a very clear and helpful video. My Kenmore refrigerator ice maker was frozen. In 5 min. I used the hair dryer, then pressed the rest button, and it began working. Your video was a lot better than many others that go into far more complicated reasons I didn't need. God bless you for posting this!
Had similar issue, after leaving the freezer drawer open for a while for cleaning, I guess condensation built a thick layer on top of tray and would not dump the ice. After pressing the reset button and the tray flipped I just manually forced the ice out of it.
This was extremely helpful. My ice tray popped off. I was trying to find why water was leaking and this answered everything. Tested and fixed successfully. You are wonderful. Didnt even have a condensation issue.
Worked beautifully! Didn’t know why it wasn’t making ice anymore… But tried your hairdryer trick, and the parts began to work again. Hit the reset button, it went through its cycle and began filling the ice tray. Thanks for the help.❤
Wish I could give you more than a single thumbs up, but I'll leave a comment so YT knows this is good stuff. The hair dryer was _exactly_ what was needed, and after a couple of presses of the reset button, the tray spun around, spun back, then started to fill. Yeah!!! Thanks, man!
Hi. From SA here. Out of all the online vids, urs worked. I looked everywhere for the button as most vids refer to it, ur vid showed me where it was and boom....it worked. Thanks Bud!
I figured that was the issue but I had no idea there was a reset button, so this helped immensely. You can use the same trick if the fridge stops cooling-- there is a damper door between the freezer and fridge to regulate the air flow that sometimes freezes shut.
Problem solved in about 1min under a blow dryer, thanks. Genius problem solving technique!! It explains why in the past it stopped working and then worked again without doing much, I must have inadvertently thawed the system out trying to diagnose the problem :-) Live is good.
for some having trouble still locating the reset button underneath we took our phone and made a picture of it. Does help because you can barely feel it underneath. You saved a marriage dear! No more arguing about the icemaker it works because of you! lol!
Hi Devin, thanks for the very practical video your suggested hair dryer solution work for me. A majority of other videos on you tube on the subject take the it's broken replace it route, and show how to perform a replacement without any attempt to troubleshoot the problem. Your's differs in that you actually show what the test mode action is, and offered an explanation and suggest fix to solve the problem without spending $ to buy a replacement ice maker. Very much appreciated.
Thank you, thank you, for the really good video, and showing the reset button! That was all it took, pressing the reset button, to get the icemaker to work again. Thank you and God bless you!
Just watched your video. My icemaker was not working and I noticed the tray was tilted and arm up. I used hair dryer to remove any build up and then hit reset switch under arm assembly. Worked almost immediately. All is good, Thx to you
Thank you! Saved me $300 when a service guy came and said after 2 minutes I needed a whole new unit for $300. Even my husband couldn’t figure it out and I solved the problem with your video !
Thank You! Not a single manual or bit of advice from LG helped at all...hell, I couldn't even find, or even know about, the reset switch based of of LG support. I don't know why that was a secret. My ice maker was identical to yours and a hair dryer fixed it quicker than it took me to buy a hair dryer!
I was an appliance repairman for years. The companies want you to call their techs out so they make money. I worked for Sears, and it was a nightmare for even US to get the manuals. Samsung is the worst offender. The companies say it's a "liability issue", but I've literally seen with my own eyes it's all about the 💰.
You just solved an issue I have been having with my Samsung RF260, bottom drawer freezer and ice maker. I could not figure out how that arm worked or if it even moved! Also I see why the ice tray is so thin, it is to allow for the flexing to dump the ice. You can never see this operation in a bottom drawer freezer, with your video I was able to see how everything works. I just replaced my icemaker as I wasn't getting any ice, but the real culprit was the fill tube, it was freezing up, apparently it has a heater which stopped working. As I had to take out the ice maker to be able to disconnect the wiring harness on the fill tube, I ordered both parts from Amazon, working fine now. I will keep the old ice maker for spare parts. Great Video.
I’ve been a tech for about 4 years now... if you do use a heat gun or a hair dryer... BE CAREFUL. If you warp the cavity... you will more than likely cause an air leak and you just caused a bigger issue. If you want to do it yourself... use a steamer.
Great description! Does anyone know what is the 3/8" plastic triangle piece on the hinge that hangs off the arm and catches on the ice tray sometimes stopping the arm from going down? Mine keeps catching the tray and I am afraid to remove it, because it is obviously there for a reason. When it catches, the tray does not release the ice because it thinks the ice buck is full. Thanks!
Ahhh, I see. I have a new Hisense refrigerator bottom freezer model And the arm is in the up position, it seems always. But now I see. The arm only comes down prior to dumping. The Hisense support rep knew 0, about that. Thanks 👍 All the refrigerators ive ever worked on had a nice regular ice makers with the metal arm and flip out ice dumpers. I can't see this lasting more than a couple of years at best. Thanks again.
This worked for my LG fridge. Not even 2 mins with a blow dryer on the mechanism that the arm connects to and tray dumped after pressing the reset button. 10/10
Hi thanks for the video. I would like to ask you is the metal part below is supposed to turn true? My is very tight and it’s not spinning. No ice is coming but it’s making ice. Any suggestions
thanks Devin my ice maker stopped making ice 8 years ago and I tried many things to fix it but nothing worked I never knew there was a reset button on the bottom I just pushed it and instantly the arm went down and the water filled the tray that was all it needed !!
Hi Devin. Thank you for your videos. Can I ask one question? My ice Maker Sankyo works when I press the reset button but it does not turn by itself to expulse the ice. What sensor is not working?
Doesn't the arm stay down and rise up as the ice raises up and then eventually shuts the unit off? Or does the arm only move down right before it is read to dump ice. If the latter is true how often does the unit send the arm down to measure the height of the ice in the ice bucket?
This was very informative and helpful my ice maker wasn't for a couple of days I was just about to call a repair technician. Any videos on replacing a water filter on the same model?
The water filter is super simple. I order my filters off of Amazon. They spin off, about half a turn and drop out. Insert new, spin tight to the notch, use the water until it runs clear. About two glasses. The filter is in the fridge. Top right.
I'll tell you what, that helped me out immensely. Unfortunately though, that led me to the problem. The reason that the ice maker doesn't work is that the fill hose is leaking at the inlet in back. We lost power for a couple of days last big storm and it must've froze and split. So in the morning I'll pull the back off and replace it. Is there any chance that you did a video on that repair...
very good video. I want to know if there is a video on how to change the ice making system, because it does not rotate, apparently the part where the test button is is loose or broken.
Ehi thank you for the video. WHat do you think...i did that but the idea maker keeps stucking (upside down...or simply the arm) and does a loud TOC TOC TOC TOC noise...for a long time...do i what may be the problem? thank you again
Thank you for the video. In my fridge the reset button push ice down to the bottom and then it fill the drip with water again. My issue is that after the water becomes ice it is not falling down never. What could be the problem? Thank you for any advice Ciao
We have a Whirlpool side by side refrigerator with a similar ice maker. Our problem is ice forms on that plastic arm and about every 5 days it freezes up and won’t make ice. We take a hair dryer and melt the ice off the plastic arm, dry it off and it starts making ice again. Is there anything we can do to stop ice from forming on the plastic arm?
I have the whirlpool refrigerator gs2shaxss01 side by side and I noticed the ice is making icicles and dripping down the right side of the inside door. Any idea why that is happening? thanks
Hi Devin, according to LG ice control arm should stay in down position after emptying the ice tray, in your video it stayed up. Which is the right position for the arm to rest. Mine is staying in up Position and my ice maker keeps on making ice even after the bucket is over filled, I have to empty it in the sink at least once a week. Regards
Thank you!!!!!!! You just saves me 500. The LG technician told me that the ice maker need ti be replaced…. Yeah sure 😒! I’m shock of the lack of ethics from this company or person, he did do NOTHING to try to repair it or at least identify the problem.
I watched your video and thank you for airing it. My frig is like 2 1/2 years old, Whirlpool. I did the hair drier, but I have not reset button, so I don't think it is going to work. It has not been working for 2 weeks and have already had it repaired once!!!! Not happy with this refrigerator at all!!!!
I’m having to repeat this process. It’s works for one tray. Then seems to freeze again. I took the assembly out for a while to make sure it wasn’t frozen. Same problem. Any suggestions.
The problem in mime was the water line was frozen! I had to use the hairdryer to thawed the line, once it did the line started flowing water to the tray again.👌😎👍thanks for the tutorial though!
Last week our freezer got left open by one of our kids. I noticed the ice was gathered around the edges but decided to just close it and not clean it up. This week I noticed we had no ice. I just thawed mine out and the ice maker is back to normal. It must of got frozen in place and couldnt dump the ice.
Gracias por tu video me ayudó mucho tenía el mismo problema ya lo habían arreglado 2 veces y esta ves decidí hacerlo yo ahora ya hace hielos pero tengo una pregunta mi hacedor de hielos siempre se descompone cuando está lleno de hielos debería apagarlo cuando se llene o se apaga automático es el mismo modelo de refrigerador que tu video
Yes you should turn it off when the bin is full. What you can also do if you don't want to turn it off is dump the ice into a bag and keep it in the freezer.
Thank you for making this video! I have an LG with the same ice-maker, and I thought the cube tray was broken, as it tilts down on the left side. Your video shows that this is the default. One question: when the tray gets refilled with water, it looks like it's still low on the left side, so how does the whole tray get filled?
@@TheDurbinCompound Mine overflows a little bit on the left where the hose is. I've read on a troubleshooting forum, that this may be caused by too much water pressure. The solution offered was to slightly close the water valve at the wall to reduce the flow. I'll give that a try.
My kenmore freezer drawer wont push in all the way, the ice maker is poking out and i cant close the freezer door because the ice maker is shut fully. A long wire with spring twisted on it keeps hitting the small rectangle and it blocks it from closing fully. So the little rectangle lifts up and down so i lift it up and put the wire spring under it in the rectangle.. but everytime I pull the ice drawer open to grab more ice, the spring wire pops back out again. Do you have any idea why it hits that barrier and doesnt close properly??
Okay so this may be a dumb question but when the icebox is off why is that center right square hole with something that pushes up into a button of some sort? On mine it has a bar that goes in there I think but I have no idea what it’s function is. Can anyone please help explain what that is please????
Hi Devin... Thank you for showing us how the ice maker works in action. I don't see this very often in repair videos, and it helps in understanding what may be going wrong to produce the symptoms that I see. Very helpful.
Thank you so much for the step by step instruction on repairing the ice maker! It worked like a charm and now I have ice again. I had torn the freezer apart the day before and never saw the Reset button! I used the hair dryer, removed the existing ice form the tray, pressed the reset and Voila! Up and running. I will share that the reason mine froze up is because we had some items on the very top shelf of the freezer that were blocking the cold air vent. Caution everyone, keep those vents clear from obstruction. 😀
Thank you for a simple fix. The LG manual says nothing about that magic reset button, your video saved me a service call!
Devin! You are my husband's hero! Thanks for helping make my family self sufficient this evening. I was able to find your video and your recommendation worked! It saved my husband a headache and thwarted my attempt at getting a replacement fridge.
Awesome! That’s what the channel is all about! Hope to see you guys around the channel! Reach out anytime
instructions worked like a champ for this type of LG refrigerator and Ice maker type. Pulled out the wife's hair dryer and thawed the Ice tray for a bit. Hit the reset button and now waiting for correct Ice to be made. Thanks DurbinCompound
Thank you!! Thank you!! Thank you!! I knew about thawing out the components with a hair dryer, but I had no idea about the reset button!! This has been driving me crazy for months!! Your video saved the day!!
Many thanks for a very clear and helpful video. My Kenmore refrigerator ice maker was frozen. In 5 min. I used the hair dryer, then pressed the rest button, and it began working. Your video was a lot better than many others that go into far more complicated reasons I didn't need. God bless you for posting this!
Had similar issue, after leaving the freezer drawer open for a while for cleaning, I guess condensation built a thick layer on top of tray and would not dump the ice. After pressing the reset button and the tray flipped I just manually forced the ice out of it.
Thanks, it works on bottom freezer Kenmore refrigerator with similar ice maker.
This was extremely helpful. My ice tray popped off. I was trying to find why water was leaking and this answered everything. Tested and fixed successfully. You are wonderful. Didnt even have a condensation issue.
My ice tray pop out, how u put it back, it is tight that area
Worked beautifully! Didn’t know why it wasn’t making ice anymore… But tried your hairdryer trick, and the parts began to work again. Hit the reset button, it went through its cycle and began filling the ice tray. Thanks for the help.❤
Stopped after 20 years! Reset button; who woulda thought! Works now! Hope to get another 20!
Thanks!!!
Thank you so much for this video. We have the same LG refrigerator, and this solved my problem in about 5 minutes.
Wish I could give you more than a single thumbs up, but I'll leave a comment so YT knows this is good stuff. The hair dryer was _exactly_ what was needed, and after a couple of presses of the reset button, the tray spun around, spun back, then started to fill. Yeah!!! Thanks, man!
Hi. From SA here. Out of all the online vids, urs worked. I looked everywhere for the button as most vids refer to it, ur vid showed me where it was and boom....it worked. Thanks Bud!
I’m glad I could help you out!
I figured that was the issue but I had no idea there was a reset button, so this helped immensely. You can use the same trick if the fridge stops cooling-- there is a damper door between the freezer and fridge to regulate the air flow that sometimes freezes shut.
This technique saved me a lot of money. Thanks so much!!
Problem solved in about 1min under a blow dryer, thanks. Genius problem solving technique!! It explains why in the past it stopped working and then worked again without doing much, I must have inadvertently thawed the system out trying to diagnose the problem :-) Live is good.
Thanks for the quick fix Devin. From one Marine to Another; Semper Fi!!
for some having trouble still locating the reset button underneath we took our phone and made a picture of it. Does help because you can barely feel it underneath. You saved a marriage dear! No more arguing about the icemaker it works because of you! lol!
Thanks for the video, as I had the same problem and your video showed me a 5 minute fix!
Hi Devin, thanks for the very practical video your suggested hair dryer solution work for me. A majority of other videos on you tube on the subject take the it's broken replace it route, and show how to perform a replacement without any attempt to troubleshoot the problem. Your's differs in that you actually show what the test mode action is, and offered an explanation and suggest fix to solve the problem without spending $ to buy a replacement ice maker. Very much appreciated.
Ice maker was kaput for several days. Tried this trick and 10 minutes later, “rattle rattle” of ice being delivered into the tray! Thank you!
Thank you, thank you, for the really good video, and showing the reset button! That was all it took, pressing the reset button, to get the icemaker to work again. Thank you and God bless you!
Just watched your video. My icemaker was not working and I noticed the tray was tilted and arm up. I used hair dryer to remove any build up and then hit reset switch under arm assembly. Worked almost immediately. All is good, Thx to you
Haha holy shit, best video I’ve watched this year. Thank you for posting this!!!!
Boom we are back in business. Thanks for showing me the hidden reset button.
I have a crappy ice maker in my fridge too. You doing good brother!
Thanks for the valuable info and video. Searching TH-cam, could not find any video that matched my Fridge. Yours did, thanks
Great info - I fixed the problem in 5 minutes. Thanks, you saved me a service call.
That’s what the channel is all about!
Thx Devin your advice easily and quickly fixed my ice maker. Semper Fi!
Great video! I’ve been searching for solution for about an hour and finally found yours. At least I got it to dump…now to see if it’ll work correctly.
Your video was super helpful!! And got my machine going!
top shelf advice mate, worked a treat, thanks form down under.
Thank you! Saved me $300 when a service guy came and said after 2 minutes I needed a whole new unit for $300. Even my husband couldn’t figure it out and I solved the problem with your video !
Thanks Devin, this is one of the most useful videos I watched!!1
Thank You! Not a single manual or bit of advice from LG helped at all...hell, I couldn't even find, or even know about, the reset switch based of of LG support. I don't know why that was a secret. My ice maker was identical to yours and a hair dryer fixed it quicker than it took me to buy a hair dryer!
Shame on manufacturers who keep diagnostic, repair, and specification info a secret. They should be policed into disclosure.
I was an appliance repairman for years. The companies want you to call their techs out so they make money. I worked for Sears, and it was a nightmare for even US to get the manuals. Samsung is the worst offender. The companies say it's a "liability issue", but I've literally seen with my own eyes it's all about the 💰.
Thanks so much . Hair dryer work great . Best video out there .
You just solved an issue I have been having with my Samsung RF260, bottom drawer freezer and ice maker. I could not figure out how that arm worked or if it even moved! Also I see why the ice tray is so thin, it is to allow for the flexing to dump the ice. You can never see this operation in a bottom drawer freezer, with your video I was able to see how everything works. I just replaced my icemaker as I wasn't getting any ice, but the real culprit was the fill tube, it was freezing up, apparently it has a heater which stopped working. As I had to take out the ice maker to be able to disconnect the wiring harness on the fill tube, I ordered both parts from Amazon, working fine now. I will keep the old ice maker for spare parts. Great Video.
2 years later 2023 I found this video thank you Devin works like charm did not know there was a rest button🙊
Thank you for the tip. Worked like a champ
I got the same type of icemaker and your video make me find the reset button in a second 👍🏼👌🏼 thanks
Never knew about the reset button. Thank you very much!
That is, Devin! Our LG fridge has a similar ice maker, and locating the reset switch helped free our stuck gadget.
Thank you for the video! I am going to try the trick right now !
You just saved me many $$$ today. Thank you so much!
It worked!!! You are absolutely the best!!
Awesome!
I’ve been a tech for about 4 years now... if you do use a heat gun or a hair dryer... BE CAREFUL. If you warp the cavity... you will more than likely cause an air leak and you just caused a bigger issue. If you want to do it yourself... use a steamer.
I did this and now my refrigerator stays running 😟
Use a hair dryer on low heat setting AND HAVE PATIENCE.
No need to go in and blast it on high heat or with heat gun.
Use common sense.
thank you so much for the info very helpful and now if I can only figure out where the white rectangle that is attached to two white wires
Thanks, this saved me a repair call.
Great video , thanks for helping me find the reset button.
Great description! Does anyone know what is the 3/8" plastic triangle piece on the hinge that hangs off the arm and catches on the ice tray sometimes stopping the arm from going down? Mine keeps catching the tray and I am afraid to remove it, because it is obviously there for a reason. When it catches, the tray does not release the ice because it thinks the ice buck is full. Thanks!
Ahhh, I see. I have a new Hisense refrigerator bottom freezer model And the arm is in the up position, it seems always. But now I see. The arm only comes down prior to dumping. The Hisense support rep knew 0, about that. Thanks 👍
All the refrigerators ive ever worked on had a nice regular ice makers with the metal arm and flip out ice dumpers. I can't see this lasting more than a couple of years at best. Thanks again.
Thank you for the video, I know its little old, but it helped me understand what to try out. By gosh I just needed to hit that reset button.
This worked for my LG fridge. Not even 2 mins with a blow dryer on the mechanism that the arm connects to and tray dumped after pressing the reset button. 10/10
💪🏻
I didn't know about the reset button as soon as I pushed that it started working thanx!!!!!
No voltage to check
Though not the same model the mechanism is the same and your direction was better than the manual. Resolved issue. Thank you!
Hi thanks for the video. I would like to ask you is the metal part below is supposed to turn true? My is very tight and it’s not spinning. No ice is coming but it’s making ice. Any suggestions
thanks Devin my ice maker stopped making ice 8 years ago and I tried many things to fix it but nothing worked I never knew there was a reset button on the bottom I just pushed it and instantly the arm went down and the water filled the tray that was all it needed !!
Great info! Thank you!
Thank you! It just needed to push the reset button and it fixed the problem.
I can't thank you enough! fixed now!
Thank you so much for the help
Thank you for this video I can fixed my ice maker.
Thanks dir for your video. Please help My freezer doesn't have a reset button. Mine is Kenwood brand.
Hi Devin. Thank you for your videos. Can I ask one question? My ice Maker Sankyo works when I press the reset button but it does not turn by itself to expulse the ice. What sensor is not working?
Helpful thanks!
Doesn't the arm stay down and rise up as the ice raises up and then eventually shuts the unit off? Or does the arm only move down right before it is read to dump ice. If the latter is true how often does the unit send the arm down to measure the height of the ice in the ice bucket?
This was very informative and helpful my ice maker wasn't for a couple of days I was just about to call a repair technician. Any videos on replacing a water filter on the same model?
The water filter is super simple. I order my filters off of Amazon. They spin off, about half a turn and drop out. Insert new, spin tight to the notch, use the water until it runs clear. About two glasses. The filter is in the fridge. Top right.
I'll tell you what, that helped me out immensely. Unfortunately though, that led me to the problem. The reason that the ice maker doesn't work is that the fill hose is leaking at the inlet in back. We lost power for a couple of days last big storm and it must've froze and split. So in the morning I'll pull the back off and replace it. Is there any chance that you did a video on that repair...
very good video. I want to know if there is a video on how to change the ice making system, because it does not rotate, apparently the part where the test button is is loose or broken.
thank you it's help a lot thank you very much
Thank you. I couldn't find the on/off switch. Thank you for advising of the reset button. GE 2019. Carol
Ehi thank you for the video. WHat do you think...i did that but the idea maker keeps stucking (upside down...or simply the arm) and does a loud TOC TOC TOC TOC noise...for a long time...do i what may be the problem?
thank you again
Thank you for the video. In my fridge the reset button push ice down to the bottom and then it fill the drip with water again. My issue is that after the water becomes ice it is not falling down never. What could be the problem?
Thank you for any advice
Ciao
Thank you so much
Ahhh ha! The reset button! Fixed it. Thank you😊
Yes!
You fixed my ice maker!!!
We have a Whirlpool side by side refrigerator with a similar ice maker. Our problem is ice forms on that plastic arm and about every 5 days it freezes up and won’t make ice. We take a hair dryer and melt the ice off the plastic arm, dry it off and it starts making ice again. Is there anything we can do to stop ice from forming on the plastic arm?
I have the whirlpool refrigerator gs2shaxss01 side by side and I noticed the ice is making icicles and dripping down the right side of the inside door. Any idea why that is happening? thanks
Hi,mine works perfectly,you can hear pump running but ice and water not coming out at all,any advice please
hello ,i have a question , what if the waterfunction (for drinking water) works, but nothing comes out of the watertube into the icemaker?
Thank you so much 😁
Hi Devin, according to LG ice control arm should stay in down position after emptying the ice tray, in your video it stayed up. Which is the right position for the arm to rest. Mine is staying in up
Position and my ice maker keeps on making ice even after the bucket is over filled, I have to empty it in the sink at least once a week.
Regards
Thank you!!!!!!! You just saves me 500. The LG technician told me that the ice maker need ti be replaced…. Yeah sure 😒! I’m shock of the lack of ethics from this company or person, he did do NOTHING to try to repair it or at least identify the problem.
Thank you
I watched your video and thank you for airing it. My frig is like 2 1/2 years old, Whirlpool. I did the hair drier, but I have not reset button, so I don't think it is going to work. It has not been working for 2 weeks and have already had it repaired once!!!! Not happy with this refrigerator at all!!!!
Thanks that worked. Last Samsung junk we ever buy again.
My ice maker over fills the tray slightly. How do you adjust the amount of water coming out
Thank you so much!!
I need this ice maker replacement part and have been unable to find it. It is like the icemaker that you are showing in this video. Can you help?
That’s exactly my ice maker! Was hard to find. Do you have a video on how to R&R this ice maker?
I’m having to repeat this process. It’s works for one tray. Then seems to freeze again. I took the assembly out for a while to make sure it wasn’t frozen. Same problem.
Any suggestions.
What about if it came down and we have never used the ice maker before? It’s for a bottom freezer
The problem in mime was the water line was frozen! I had to use the hairdryer to thawed the line, once it did the line started flowing water to the tray again.👌😎👍thanks for the tutorial though!
Last week our freezer got left open by one of our kids. I noticed the ice was gathered around the edges but decided to just close it and not clean it up.
This week I noticed we had no ice. I just thawed mine out and the ice maker is back to normal.
It must of got frozen in place and couldnt dump the ice.
Gracias por tu video me ayudó mucho tenía el mismo problema ya lo habían arreglado 2 veces y esta ves decidí hacerlo yo ahora ya hace hielos pero tengo una pregunta mi hacedor de hielos siempre se descompone cuando está lleno de hielos debería apagarlo cuando se llene o se apaga automático es el mismo modelo de refrigerador que tu video
Yes you should turn it off when the bin is full. What you can also do if you don't want to turn it off is dump the ice into a bag and keep it in the freezer.
Thank you for making this video! I have an LG with the same ice-maker, and I thought the cube tray was broken, as it tilts down on the left side. Your video shows that this is the default. One question: when the tray gets refilled with water, it looks like it's still low on the left side, so how does the whole tray get filled?
Mine will over flow on the right. Still a little low on the left
@@TheDurbinCompound Mine overflows a little bit on the left where the hose is. I've read on a troubleshooting forum, that this may be caused by too much water pressure. The solution offered was to slightly close the water valve at the wall to reduce the flow. I'll give that a try.
I like your new video you did a really good jop today buddy good jop today buddy
My kenmore freezer drawer wont push in all the way, the ice maker is poking out and i cant close the freezer door because the ice maker is shut fully. A long wire with spring twisted on it keeps hitting the small rectangle and it blocks it from closing fully. So the little rectangle lifts up and down so i lift it up and put the wire spring under it in the rectangle.. but everytime I pull the ice drawer open to grab more ice, the spring wire pops back out again. Do you have any idea why it hits that barrier and doesnt close properly??
Sorry for the delay. I’m not sure why your ice maker is doing that. Have you got anything resolved?
Okay so this may be a dumb question but when the icebox is off why is that center right square hole with something that pushes up into a button of some sort? On mine it has a bar that goes in there I think but I have no idea what it’s function is. Can anyone please help explain what that is please????
In my hisense i don have on of buttin or reset button. How can i fix that problem. Water is coming in glass but in ice tray dont.