I watched both of your reviews and decided to splurge on this. Absolute game changer. Wish I bought it sooner. Here are extra tips for folks that want to buy this: I soak my bottles and parts in dish soapy water. I noticed that if I leave them out to dry or right after pumping, it can leave the washing tablet residue. Glass bottles wash the best I place those green valves right next to the bottle. Nipples best on top rack If you live in an area with hard water, may want to use filtered water. Honestly I don't see any negatives either, I run this machine 4 times daily.
I had been looking into this bottle washer for a few days now but you've now convinced me. Best review I've seen so far. Also the first time I've ever used an affiliate link because I wanted to support your channel. Thanks so much for an actually good review after more than just 2 days of use like some other reviewers out there. Thanks!
@@nikkot9508 Wow, that truly means a lot to me and I really appreciate your comments & support. I’m glad that the video was helpful and I’d love to hear how it goes for you once you have the chance to use it for a bit!
@@oliviaczhou great question! We have two of the Boom drying lawn products side by side, next to the washer and then we just transfer the clean parts there and store them until we need them! amzn.to/3P6L4zf
Thank you for the amazing review. I’m on the edge to purchase it but our nearest sink for the machine is raised from the table for about 5 inch. Do you know if that would cause problems for water draining ?
@@ben_wrc you’re welcome! I think that may cause an issue if your sink is higher than the unit, but if you can find a way to raise the unit up with maybe some books or something similar, as long as the drain outlet is higher than the sink then it should flow out.
I have a problem with white cloudy residue after each wash. I have contacted with Momcozy and they said I used tap water so I should add 5-10% solution of citric acid during running cleaning cycle. But it does not help. Any tip for me?
@@ThanhHuynh-rd8wk i’ve also encountered this issue before. You can try one of these 2 options: 1) Mix white vinegar and Purified water in a 1:2 ratio to make a 250 mLsolution. Pour it directly into the water tank and start the quick wash cycle. So basically, about 85 mL of Vinegar and 165 mL of water. 2) Add 5-10 ml of white vinegar directly into the inner chamber for washing. (This can be done occasionally, about 1-2 times, as frequent use might cause corrosion.)
I fill up the dirty baby bottles up water and let it sit for a few hours before washing. I believe the cloudy residue is the oils from the formula not getting washed off fully so when I let it sit with water it dissolves off the walls and the bottles come out much cleaner.
I use Dr brown bottles too and I dangle the green part from the 4 center round holes in the top basket. That leaves the bottom corners available to put two white rings from the bottle and place a nipple right on top of those two. I find the nipples clean better there!
@@RusselandCarla Hi, I just confirmed with Momcozy that this product will be available for purchase in Canada around December of this year. Sorry for the inconvenience but I’ll let you know once it’s available!
I watched both of your reviews and decided to splurge on this. Absolute game changer. Wish I bought it sooner.
Here are extra tips for folks that want to buy this:
I soak my bottles and parts in dish soapy water. I noticed that if I leave them out to dry or right after pumping, it can leave the washing tablet residue.
Glass bottles wash the best
I place those green valves right next to the bottle.
Nipples best on top rack
If you live in an area with hard water, may want to use filtered water.
Honestly I don't see any negatives either, I run this machine 4 times daily.
@@DavidDener4567 🙌🏻 I’m so glad you also find it to be a game changer! Thanks so much for adding your tips, these are really helpful.
I had been looking into this bottle washer for a few days now but you've now convinced me. Best review I've seen so far. Also the first time I've ever used an affiliate link because I wanted to support your channel. Thanks so much for an actually good review after more than just 2 days of use like some other reviewers out there. Thanks!
@@nikkot9508 Wow, that truly means a lot to me and I really appreciate your comments & support. I’m glad that the video was helpful and I’d love to hear how it goes for you once you have the chance to use it for a bit!
@@DadLifePGH Will do!!
how do you store the cleaned bottles and parts?
@@oliviaczhou great question! We have two of the Boom drying lawn products side by side, next to the washer and then we just transfer the clean parts there and store them until we need them!
amzn.to/3P6L4zf
Thank you for the amazing review. I’m on the edge to purchase it but our nearest sink for the machine is raised from the table for about 5 inch. Do you know if that would cause problems for water draining ?
@@ben_wrc you’re welcome! I think that may cause an issue if your sink is higher than the unit, but if you can find a way to raise the unit up with maybe some books or something similar, as long as the drain outlet is higher than the sink then it should flow out.
I cannot find momcozy’s product on their website :/
@@syedaafsheen555 it’s possible that they may not be selling it in your region yet if you don’t see it on their website. Hopefully soon!
I have a problem with white cloudy residue after each wash. I have contacted with Momcozy and they said I used tap water so I should add 5-10% solution of citric acid during running cleaning cycle. But it does not help. Any tip for me?
@@ThanhHuynh-rd8wk i’ve also encountered this issue before.
You can try one of these 2 options:
1) Mix white vinegar and Purified water in a 1:2 ratio to make a 250 mLsolution. Pour it directly into the water tank and start the quick wash cycle. So basically, about 85 mL of Vinegar and 165 mL of water.
2) Add 5-10 ml of white vinegar directly into the inner chamber for washing. (This can be done occasionally, about 1-2 times, as frequent use might cause corrosion.)
I fill up the dirty baby bottles up water and let it sit for a few hours before washing. I believe the cloudy residue is the oils from the formula not getting washed off fully so when I let it sit with water it dissolves off the walls and the bottles come out much cleaner.
I use Dr brown bottles too and I dangle the green part from the 4 center round holes in the top basket. That leaves the bottom corners available to put two white rings from the bottle and place a nipple right on top of those two. I find the nipples clean better there!
@@TB-dm3ps That’s a great tip! Thank you so much for dropping a comment!
Can’t find the product anywhere, not even on their website.
@@Thaisegrv Which country are you in?
Do we fill the back with Cold or hot water?
@@Miriam-r2e I usually fill it with cold, filtered water but it shouldn’t matter!
Is this available in Canada?
@@RusselandCarla Hi! It should be available though the Amazon link, but I can confirm with Momcozy as well if it doesn’t work for you.
It's currently unavailable as per the Amazon link.
@@RusselandCarla Hi, I just confirmed with Momcozy that this product will be available for purchase in Canada around December of this year. Sorry for the inconvenience but I’ll let you know once it’s available!