What I loved in this video is that it starts off to the actual work rather than too much talk like every other videos you see out there. Well done man!
Hey man. Thanks for the video! It encouraged me to try it. I used the sheet and cut because i have aggressive curves on my car. Even with my shaky hands it came out perfectly. I don't understand why people trying to charge $500+ for this.
I know you have your technique and what works for you works for you. For everyone else, you may want to consider using 3M knifeless tape. Then you won't need to mask anything, and the only time you'll bring a real knife out is to make the cut at the door edge when the vinyl gets cut in the door jamb.
Damn good job, you make that look so easy. I'm gonna try this, I feel I can pull this off. Good quality products to work with make all the difference in the world. Looks fun as well, I wouldn't mind performing this upgrade all day long for a living. You're great at this. Looks super LEGIT!
@@thebutcherofbenghazi.libya3348 Lol nope. TF you're even talking about? The kind of cars this is done to are not the kind of cars you're think of. Go ahead, say some more stupid shit...
You didn’t forget what it’s called! The 3M is right on the backside where we seeing you look at it!!! You just didn’t wanna see because you wanted to send us to your website!
Regarding the yard of gloss black 3M wrap, what kind of yard are we talking about? The ranch house? suburban home? or something smaller like a terrace house?
Looks great. I do have a question though. How does it stand up against high temps, like South Texas heat or the automatic car washes that have the hot wax option?
You can do this sort of gloss black with a shelf life of about 3 years before you got to remove it again.... or you can do it the proper way. Remove, have it painted and install back. High gloss guaranteed, shelf life about 10 to 15 years before it starts to go bad.
Just wrapped my trim this past weekend; why don't you just open up the doors to lip all the way in lol. Pulled back my rubber seal too to tuck the vinyl underneath
Bro I make a lot now at a desk to use my brain basically allocating tape and knives most effectively. My back is so fucked up at 40 that I physically couldn't do your job. And I used to do your job. Point is, we all need each other. I vote to tax myself to pay guys like you's insurance because I know what you are capable of becoming. Quick shout out from a California libtard in case anyone reading is wondering why we do what we do. I spent 20 years building junkyard turbo bullshit and dying of no health insurance before I went to school.
Thanks, I just got my car wrapped and I'm thinking about doing chrome delete too. But the shops I went to wanted at least $600 per side... I think I'll do it myself instead!
I don’t cut the natural breaks. Just wrap over them. Most of them are too tight to cut anyways and you’ll scratch the chrome. Then the second piece to continue will make it look even worse. Just one strip.
Thanks for posting this video - I had no idea this product existed. If you could offer a guess on how many years it might last in the sun that would be great...
How do you join two separate pieces or can you buy a large enough piece to cover larger area? My crome doesn't have a break and has a large curve at the back (2018 Tesla Model S).
can the same technique be applied to the door pillars/window molds? thinking of wrapping my rear window molds gloss black (on the X1 only the B-pillar is shadow line. the rear window mold has like a matte finish) if you can, can you do a vid on wrapping the door pillars/window molds? it will be much appreciated. huge thanks!
How much will I need for a Yukon?? I’d like to black out my window trim as well as the trim on the side steps and the from chrome pieces around the fog lights
How much is it to have a shop like yours install this stuff for me. Say a 2017 Subaru Outback Limited with nasty chrome. I want ALL chrome including the grill blacked out. How mucho?
I still don’t know how you managed it to bend that tape it’s getting squeaky when I tried to bend all over the trim 🤷♂️ 5series f10 2011 fron window from edge to the mirror side just tape didn’t work
Robert Lively get a gloss one, believe me, it’ll give so much better look than matte color. A lot of cheap compact cars come with matte and you don’t want your car to give a look like one of those cheap cars. I did gloss black on my 14’ MB C250 and it looks really good. But got my tape from ebay for cheap.
I can't just buy a yard of that anywhere. Even your store doesn't have it and you need a second for the other side. Not sure if I would want to try that back with tape though.
Please help, Questions: Can you do it on chrome door handles, have black matte & prior to putting on the fill do you have to spray any water being applying it ?? Like tints- Thank you!
Baby D510 do not ever spray water before applying a vinyl wrap. Any water under a wrap will cause it to fail. You can buy a wide range of air release vinyl to wrap your handles but if you haven't wrapped before, you're probably going to struggle on most modern door handles. There's heaps of tutorials out there on TH-cam, just have a look
Yea vinyl wrap is pretty durable since it’s a black it won’t fade that much, you might have to re wrap it every couple of years tho if you go for a gloss finish, matte is where it’s at 💪🏼
Thang Nguyen usually that chrome trim comes off. I think its open under the mirror on BMW’s, but on my MB C250 its kind of hidden, so i had to take the chrome out and wrap it. Different in each car basically. If yours is behind the mirror, google how you can take it off and wrap it.
![“อ.เบียร์ คนตื่นธรรม” มาตามคำเรียกร้อง แหกศาสตร์ฮวงจุ้ย เตือนสติอย่างมงาย | แฉ 7 พ.ย. 67 [1/3]](http://i.ytimg.com/vi/5fc4S3xBNfc/mqdefault.jpg)
What I loved in this video is that it starts off to the actual work rather than too much talk like every other videos you see out there. Well done man!
Hey man. Thanks for the video! It encouraged me to try it. I used the sheet and cut because i have aggressive curves on my car. Even with my shaky hands it came out perfectly. I don't understand why people trying to charge $500+ for this.
Was told 399 for both sides hence why I’m here
I'm learning! I would to love see a "bad wraps episode" one day. Correcting/fixing bad wrap jobs and mistakes they made..
What’s the song it slapsssss
Great idea 💡 make this happen please 🙏🏽
Looks like complete shit
By far the best vinyl DIY, I've seen. Great camera work & instructions.
I know you have your technique and what works for you works for you. For everyone else, you may want to consider using 3M knifeless tape. Then you won't need to mask anything, and the only time you'll bring a real knife out is to make the cut at the door edge when the vinyl gets cut in the door jamb.
Great tip - just read up on it - thanks!
"It's very easy to with with, it sticks really well, is very easy to cut, very easy to use".
Yeah, I'd totally mess that up, no doubt about it.
for reals, they make it look so simple.
Damn good job, you make that look so easy.
I'm gonna try this, I feel I can pull this off. Good quality products to work with make all the difference in the world.
Looks fun as well, I wouldn't mind performing this upgrade all day long for a living.
You're great at this.
Looks super LEGIT!
Did you pull it off, if you did, can you do mine?? I'd forever be grateful!
Use cutting tape instead of a blade
@@karlmeadows4986 cutting tape was terrible decision, blade is definitely better
Did you do it?
@@klodybolduc it's very easy with dechrome tape . Did it recently, definitely something average person can do at home and looks really good 👍
Feckin hate chrome and could not get an amg night edition in Ireland! Gonna have to try this!
The car is also available on the website
He makes it look so easy. I'd be afraid of cutting the rubber trim. I'll have a professional do it for me!
such a ricer-boy mod, anyway.
@@thebutcherofbenghazi.libya3348 Lol nope. TF you're even talking about? The kind of cars this is done to are not the kind of cars you're think of. Go ahead, say some more stupid shit...
Awesome. I priced black chrome to do all the trim on my Fairlane and it was freakin insane. This is the trick.
well done sir..excellent tutorial..after watching dozens of window trim wrap diy, this one is best.
You didn’t forget what it’s called! The 3M is right on the backside where we seeing you look at it!!! You just didn’t wanna see because you wanted to send us to your website!
Why didnt you just open the door
They sell the product not a brain 🧠
How long does this wrap last?
If i don't have a heat gun can I use a hair dryer?? And how would I do the grille??
it's 3m 1080. it's on the back lol
gotshirts2ink "special tape"
Amazon has it for 20$ and this dude is selling it for 50$ lol
BIG Michael Kish he didnt forget he wants you to buy his
Is there matte?
The Amazon stuff is probably a Knock-off
I was going to your website but forgot the name!
wow thanks for this, i feel like i can do it myself now! but doesnt the tape oxidize overtime?
The song in the background at 8:00 I literally just listened to it while i was watching the video 😂
Regarding the yard of gloss black 3M wrap, what kind of yard are we talking about? The ranch house? suburban home? or something smaller like a terrace house?
Looks great. I do have a question though. How does it stand up against high temps, like South Texas heat or the automatic car washes that have the hot wax option?
Good question 👍
How does it work in a high and low temps with snow car wash ?
You can do this sort of gloss black with a shelf life of about 3 years before you got to remove it again.... or you can do it the proper way. Remove, have it painted and install back. High gloss guaranteed, shelf life about 10 to 15 years before it starts to go bad.
I never own cars lomger than a few years anyways n there's no satisfaction in paying som asshole to rip you off
I use plastidip
Just wrapped my trim this past weekend; why don't you just open up the doors to lip all the way in lol. Pulled back my rubber seal too to tuck the vinyl underneath
actually pre smart there haha, same thing I woulda did
tthatigerrr yea hes like amateur hr lol
It has a frameless door, so their isn't any door frame
How long does it last? I wonder if it's any good in snow ❄
Bro I make a lot now at a desk to use my brain basically allocating tape and knives most effectively. My back is so fucked up at 40 that I physically couldn't do your job. And I used to do your job. Point is, we all need each other. I vote to tax myself to pay guys like you's insurance because I know what you are capable of becoming. Quick shout out from a California libtard in case anyone reading is wondering why we do what we do. I spent 20 years building junkyard turbo bullshit and dying of no health insurance before I went to school.
Thanks, I just got my car wrapped and I'm thinking about doing chrome delete too. But the shops I went to wanted at least $600 per side... I think I'll do it myself instead!
How much horsepower does this trim delete wrap give
I don’t cut the natural breaks. Just wrap over them. Most of them are too tight to cut anyways and you’ll scratch the chrome. Then the second piece to continue will make it look even worse.
Just one strip.
This is awesome! Thanks man. I have same exact car in black and I'm going to be doing exactly this to my car with products from your company. 👍
Been looking for a video on this for a while
dude made it look so easy now ima gonna attempt it and mess it up lol
Can you guys show how to wrap door handles without taking them off the car?
it will be hard and look unprofessional
Don't be lazy, takes a few extra minutes and looks way better to remove and wrap
How durable and long-lasting is this? Can it stand up to automatic car washes?
It could last up to 4-5 years
Thanks for posting this video - I had no idea this product existed. If you could offer a guess on how many years it might last in the sun that would be great...
How do you join two separate pieces or can you buy a large enough piece to cover larger area? My crome doesn't have a break and has a large curve at the back (2018 Tesla Model S).
How come ppl use gloss black for the trims?
Why not matte
Ok I have a new found respect for this chrome delete work. Thanks for the video! I like the music, what is it?
SALUDOS DESDE COLOMBIA
BUEN TRABAJO , REGARDS FROM COLOMBIA GOOD WORKING
The sponser shows lol I wouldeve been saving that piece all careful for the other side 🤣 .. good work tho fursure doing this on my caddy 🔥
can the same technique be applied to the door pillars/window molds? thinking of wrapping my rear window molds gloss black (on the X1 only the B-pillar is shadow line. the rear window mold has like a matte finish)
if you can, can you do a vid on wrapping the door pillars/window molds? it will be much appreciated. huge thanks!
Ya could find the same tape from amazon works great I did it on my car
How much will I need for a Yukon?? I’d like to black out my window trim as well as the trim on the side steps and the from chrome pieces around the fog lights
Should you do chrome delete before or after you get your windows tinted?
Doesn’t matter , close your windows if anything
What brand of tape did you use? I was looking at reviews and these are alot of negative reviews. Don't want to use my time with a cheap brand.
Nice video, looking to do this on my wife’s Cadillac XT5. What’s the song playing at the end?
Im with your wife in her xt5
How much is it to have a shop like yours install this stuff for me. Say a 2017 Subaru Outback Limited with nasty chrome. I want ALL chrome including the grill blacked out. How mucho?
I would fail miserably at this 😂😂😂
Nahhhh can't be too hard, (I hope!!)
I took mine off and painted it.... looks and was pretty simple considering you can take the trim off
Yes you drive an 86 . . Build quality isnt the same as audis.
I still don’t know how you managed it to bend that tape it’s getting squeaky when I tried to bend all over the trim 🤷♂️ 5series f10 2011 fron window from edge to the mirror side just tape didn’t work
i was going to order this until i saw it was $42 for a roll of duct tape XD
Oracle Gaming It’s on amazon for 20 dollars last time I checked.
I was also... BUT items listed "Gloss black & Matte black", BUT you are required to only select Gloss or Satin..... I WANT Matte!!
Joe Biden's Shotgun last time that I checc’d
Robert Lively get a gloss one, believe me, it’ll give so much better look than matte color. A lot of cheap compact cars come with matte and you don’t want your car to give a look like one of those cheap cars. I did gloss black on my 14’ MB C250 and it looks really good. But got my tape from ebay for cheap.
@@kaygeeboi what's the name on there bro
Question are we able to use knifeless tape? Or do you recommend using blade specifically for this?
You guys are good as fuck. You guys are gonna blow up and get famous. I can see it. I wished I lived closer baha
Do you guys ever use knifeless tape to do window trims? Maybe you can do a video
so If I buy this tape does it come with the big part vinyl too to cover the curl back like you did?
Been looking for something just like this except I wish it wasn't such a high gloss.
Shadowline trim
It comes in satin finish also
add the glove to the kit to start wrapping :)
KidFabian149 isn't that Michael Jacksons glove lmfao
literally night and day difference this makes on your bmw
How does this hold up in the long run? Can it still be washed with a normal pressure washer?
Did you ever find out? Wondering myself.
@@descripto2586 been on my truck for about 6 months. I just gently wash it. Not with high pressure
Is this easy enough to remove? I really want to do this but I lease my car. I would need to remove when it goes back!
Heat it up to remove it
and this video is available on our website
I was more amazed at the quality of video.
At the end you forgot to mention the heat gun for products that are needed. Other than that, great vid. thanks.
What size roll do I need to blackout my window trim for 2014 lexus is 350 f sport? Did not see it in your category on website..thankyou.
Good demo
Thank you! Every place tried to charge me $400+ to chrome delete
Who Lee Hoe yo i feel you man i got a quote of 470$ for my car and would rather pay 45$ for a roll and do it my self haha
Carlos just did it myself and bought the tools and wrap for $65 only took me 7 hours :)) but saved $400+
Who Lee Hoe did u buy the tools and wrap from their website or somewhere else?
Carlos I was going to but I just picked it up at a local shop. EZAUTOWRAP for the wrap and harbor freight for the tools.
Who Lee Hoe gotcha man appreciate it, i'll let u know if i end up doing and how it turns out
The best window trim wrap diy
I can't just buy a yard of that anywhere. Even your store doesn't have it and you need a second for the other side. Not sure if I would want to try that back with tape though.
I’ve done it to 1 of my cars, i own a 15’ toyota venza and thinking of doing it, any tips on that? Please let me know if you guys know.
Looks really good..awesome
Please help, Questions: Can you do it on chrome door handles, have black matte & prior to putting on the fill do you have to spray any water being applying it ?? Like tints-
Thank you!
Baby D510 do not ever spray water before applying a vinyl wrap. Any water under a wrap will cause it to fail.
You can buy a wide range of air release vinyl to wrap your handles but if you haven't wrapped before, you're probably going to struggle on most modern door handles. There's heaps of tutorials out there on TH-cam, just have a look
can you put this on the door handles as well?
I was told by someone that they have to use a primer on my chrome before wrapping it because chrome isn't porous. Is this true?
GREAT VID
forgot what it's called, great salesman
Do you wrap the door handles or just leave those chrome?
How does it work in places with snow and car wash ?
Is this a trend right now to remove chrome ? I thought it looked fine with the chrome but great job regardless.
people have always hated chrome. audi even have their ''shadow line'' cars where the difference is only black trim instead of chrome...
nice work
Amazing video
Do you have a film to tint the chrome rather than total blackout?
Well done Sir, great video
How long did it take
You guys dont sell vinyl rolls themselves? Need 5x5 roll to wrap my accord coupe roof any idea where to get
How long does this last in rain car washes etc
Nice demo!
How will this handle Florida heat and sunshine?
Yea vinyl wrap is pretty durable since it’s a black it won’t fade that much, you might have to re wrap it every couple of years tho if you go for a gloss finish, matte is where it’s at 💪🏼
Where you guys located. I got an s3 that I'm trying to get work on.
Riverside California
Will it come off with a jet wash?
This tape lol "ow i forgot what its called" it's a vinyl wrap roll off cut lol
ik right like who forgets the name of there own friggin product
The music 🎵 in the background 🔥🔥🔥🔥
is trash
Good stuff man. Subscribed!
This is some great product
Much much tape would I use for a 4 door Nissan altima
This car is available on our website...
Would it be good to use knife less tape?
Can you send me the link on where to by the film for chrome delete 2017 Santa Fe sport an do yo have something for the emblem
nice job
how long will this last?
How did you wrap the trim under the mirror? That tiny silver trim that is hard to get to
Thang Nguyen usually that chrome trim comes off. I think its open under the mirror on BMW’s, but on my MB C250 its kind of hidden, so i had to take the chrome out and wrap it. Different in each car basically. If yours is behind the mirror, google how you can take it off and wrap it.