ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- Coleman B200 Mini bike gets faster with one mod!
Installed a 40-tooth sprocket on the Coleman B200 mini bike.
Tested the bike for 0 to 30 and top speed.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: www.youtube.co...
Instagram - Doubledown555Black66
_________________________________________________________________________
Parts used -
40 sprocket - www.amazon.com...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so. The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
![일상 속 기분 좋음 [Proto disco meme]](http://i.ytimg.com/vi/DwmEIaZ7XGQ/mqdefault.jpg)
Loving this series! Carb, exhaust, flywheel?
Check out the next few videos with this bike. I have a couple coming out back to back Wednesday and Saturday.
This man is the master of all mini bikes and mini bike channels. Seriously appreciate everything you do.
Thanks for watching the videos!
I'd say it's Nibbi Time! Kinda matches the bikes colors. Thx for the great content!
Love the content for the project & perfectly explained
And will stay tuned in
Loved the ride-along! Great show 🍻
Glad you enjoyed it!
The boss got all nervous when she saw me eyeing that red paint.
I almost want to swap the colors around on my MegaMoto but I really don't want to have to put it all back together haha.
Man I like these new Coleman bikes, might have to pick one up myself. Another great vid, can’t wait to see what all you do to it
Thanks! I have more videos coming out with this bike .
Pick one up asap!!
Just got one today. It’s awesome
Another great video I will be working on some of my mini bikes really soon 👍🏻
I just bought this and needed this video, thanks so much ❤
Check out the B200 playlist for more videos on this bike.th-cam.com/video/FlE5YZ1oFwE/w-d-xo.html
hope to have as much minis as u bro good stuff 🔥
Next is a Stage 1. You won’t need to use a new carb; the stock one will easily let you see mid 50s or upper 50s with a header so long as you re-Jet of course.
I had to rob one of my dead ‘80s Honda mowers for its emulsion tube to make it work … the Lifan 196’s stock emulsion tube won’t respond to a bigger jet.
I may have mentioned sizes in the one video I made about mine awhile back.
Be careful … those stock tires are nasty at speed as I’m sure you know.
The smaller rear sprocket is one I’d do even without a top-end gain because most clutches or TC’s just grab too quick for wanting to poke around the yard smoothly.
Be sure to check out Wednesdays videos on this bike!
Awesome dude. Looks like a fun bike
I wonder how much the tyres slow it down? let's see how the difference a road tread of the same size effects the acceleration and top speed (along with Db?)
Bike is way better looking then the other bike. Great video!! What was the top speed stock? I think i missed that video.
I think it was around 32MPH
I think its time for a cam and some jets! 👍🎥
Nice bike, does it ride smoothly? Also, (and this is off topic but) do you think a 58mm crankshaft would fit in a 68mm block? I know that no one has done this (and posted it online) as of yet. I would say that it could work but the only thing that would need to happen is the piston would need to be milled down approximately 4mm and/or a shorter than usual connecting rod would need to be installed (if that’s even a thing). What do you think?
Yes, I would try it just for something different.
Hey black66 I have a request after the b200 series I was wondering if you could get a 160cc Honda 5hp tiller engine and try to get it as fast as you can on a doodle bug frame?
I built a 223cc with the works for my RT200 and put 22" tires on it for a bit more squish... the torque keeps smoking clutches so Ill have to put a torque converter on it. I know you love the speed runs but it would be cool to see different high torque / lower speed builds for hill riding / off roading.
All the bikes are set up like that from the factory. 50t sprocket is for digging. 40t sprocket is for speed.
Hell yeah might get me a 40t sprocket thanks !
Hey black, love your videos. I have a Coleman bt200x I have a simple gov bypass done and bigger air filter and previous owner drilled stock exhaust.
I’m 200lbs and hit a top speed of 29mph. Anything I can do to make it faster?
Thanks! Check out the playlist on the channel .
Do you by chance know the chain size? Awesome content btw!
Yes it runs a 420 chain. Check out the B200 playlist for many more videos with this bike. th-cam.com/video/9Tk-t17M-ww/w-d-xo.html
Was wondering where you purchased your exhaust pipe? I like it better then any that I've looked at.
MB200 exhaust. Check out the B200 playlist The parts are in the description of the videos. th-cam.com/video/jjtfBiuCFOM/w-d-xo.html
Love the vids man! I got a predator 212cc with the go powerracing stage 2 kit and recomendations on clutches and gearing? Only hitting 57 atm🙏
I just got this bike and I need serious recommendations on what to do to it to get it faster no one has this bike with vids on it
Watch the next couple video on this bike. Wednesday and Saturday.
looks like they had the Master link on backwards... I know the link needs to face the direction in which it wont flick the retainer off if it catches on something... but here's a problem. the bottom of the chain does not travel as fast as the bike, in fact it often does less that 1/2 the speed of the bike, and it is exposed to whatever is on the ground. So when riding over sticks and other debris on the ground, if the link retainer is the way it is "Supposed to be" it catches on the debris and flicks off... so In that case it's better to have it backwards unless you like to spin the wheel while going over the debris!
This is one reason why you will see that in most of the builds on the channel I don't use a master link at all.
I like the rear fender, much better than the fender on the mega moto 212. Do you think that the fender would work? I would leave it stock, you have lots of modified bikes already. 🎉
I think you will like what I do with the bike, video coming out this Wednesday!
Could you try throwing a juggernaut driver on that setup ? You should be over 50mph after that !
Check out the next two videos on this bike. Wednesday and Saturday.
Very cool. Looks like downhill though?
Check out the b200 playlist for many top speed runs on flat road. th-cam.com/video/hK42YGn7yXY/w-d-xo.html
You need to build a time machine next,,,🤠
I'm thinking a 400 cc all stock motor dirt bike carb on the 40 tooth in the near future
And hopefully I can do a smooth 60 - 75 top with only a few mods such as springs ratio rockers and a cam with stage 2 muffler
If you add a torque converter how much top speed would you gain. Contemplating adding this to my ct200u
The B200 has a torque converter. Check out the CT200U-EX playlist for many torque converter videos.th-cam.com/video/SB5q8OGRi_A/w-d-xo.html
You should say sprocket ship ⚙️🚀
😃👍👍
Did you drill out the holes for the 3 bolt pattern
That B200 Mini Bike I think would be a heavy duty mini bike for a friend. He weighs 350lb. to 375lb. to haul him around..
I got a 420cc hemi got like 400lbs on my rb200 I'm hitting like 84 mph
I have the b200 and I’m 290 or so atm..does great even going up hill to our neighborhood gas station/store..even with my 3 year old with me!! I’ve done non epa carb with main jet and header/muffler and zip tie..loving it will run it like this for a while and start buying parts for an overhaul during winter!!
Can you straight chain the b200rsv or how does it work because it's not setup like the other mini bikes are
where can I get the sprocket? And did you drill the holes yourself?
Links for the parts used are in the description of the videos. Check out the playlist on the channel. Thanks for watching!
Does the stage one performance kit from go power sports fit this bike?
I am very surprised that my trailmaster hurricane 200x stock 196cc gets 40 m/hr no mods. Whats the difference between the 2?
Compare a pwk28 and a mikuni 33mm carburetor
Hey Black i bought a hyfrualic brake kit a little while ago for my storm 200 i have a mikuni carb and pipe on there im looking for break power do you know of any way to put that on a storm 200 i want to have it summer ready and fun safe riding.
Yes I'm taking off the header pipe for now..😂😂😂 and I'll be getting that 40 tooth sprocket and i have to put my stock carb back on and like I explained Before some reason my b200 has a jack shaft no torque converter I believe they work similar but the jack shaft won't allow me to go past 33mph. I by passed the governor switching link to carb housing
There are few different models of this bike. The B200 with the torque converter. The B200R with the jackshaft , the B200rsv with the rear suspension and the torque converter, and then couple sub models.
Looks like theres a new bike in your garage? With a flat head? 👀
Yes, Azusa bike.
Do they make a header pipe and performance carb for this model?
Yes, check out the B200 playlist th-cam.com/video/jjtfBiuCFOM/w-d-xo.html
quick question when i’m going full speed on my b200 it will stop giving throttle then a sec later keep going and repeats
You’re hitting the governor, it has that “lurching” feel to it.
Its super easy to ziptie it i have the b200r and ziptie on that mf speeds it up!
@@VolTrixYT thank man i just did it and it’s going faster now its hard to find stuff to put on it
If want if i was you later down the line upgrade it to a 212cc pred (not ghost) and do the same thing remove governer its at least 45-50mph tops
And the pred is more handleable at top speed (safer)
May I ask how you were precise to drill out the sprocket for 3 holes?
As shown in the video the sprocket is hubcentric.
@@Black66 I see that. What was your method?
@@SHFlameHead1 I used the drill press and a clamp to keep the sprocket in place while drilling.
And I purchased it used and will be needing a new motor soon 😂 they rode it hard
Where can i get 2 of these, im in California and i cant find any? Can anybody direct me somewhere?
Im watching the series full I want to get a mb200
cam and exhaust
How is your chain on the right side
There are a few different models of this bike...There is the B200RSV which has front and rear suspension with a torque converter. The B200R has front suspension with a jack shaft and then the B200 which has front suspension and a torque converter and a couple of sub models.
@@Black66 oh ok makes sense I have the b200r I thought they were the same except the rsv
Air box carb and exhaust!
Check out the video coming out on this bike Wednesday!
Link to the sprocket used?
Links for the parts used are in the description of the videos.
Do the stage 1 now
I want 1 where did u buy it?
Tractor supply
@@Black66 appreciate it🫡
where u stay at?
Kingman AZ
The link is to a 4 hole the one we need is 3 hole
Hey black, love your videos. I have a Coleman bt200x I have a simple gov bypass done and bigger air filter and previous owner drilled stock exhaust.
I’m 200lbs and hit a top speed of 29mph. Anything I can do to make it faster?
Thanks! Watch the CT200U-EX, CT200U, and the B200 playlist. They show many different mods to make the bike faster. th-cam.com/video/9Tk-t17M-ww/w-d-xo.html