Yamaha XS 650 dynamic ignition timing
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Tutorial, How to set ignition timing points with engine running using a dwell meter and a timing light for easy starts and great engine performance.
Support this channel, Search Amazon tools and parts link amzn.to/3OAo4pF
Amazon 1970-1982 Yamaha XS1 XS2 TX650 XS650 Clymer Motorcycle Repair Manual amzn.to/2hwzVpX
Amazon ignition points amzn.to/2gTkx7D
Amazon Automotive dwell meter amzn.to/2gTTydy
Amazon inductive Timing Light amzn.to/2hDgFul
Amazon Black and Brown Ribbed Leather "Cafe" Seat
amzn.to/2hWMrio
Related video's
-Yamaha Xs650 cam chain adjustment • Yamaha Xs650 cam chain...
-Yamaha XS650 Static Ignition timing
• Yamaha XS650 Static Ig...
Yamaha XS650 clutch adjustment • Yamaha XS650 clutch ad...
Fix a slipping motorcycle clutch on a low budget • Fix a slipping motorcy...
Slipping motorcycle clutch, Cheap fix • Slipping motorcycle cl...
Models covered are lists below
1979 Yamaha XS650-2 Special II
1978-1979 Yamaha XS650S Special
1975-1979 Yamaha XS650
1973-1974 Yamaha TX750
1973-1974 Yamaha TX650
1972 Yamaha XS2
1970-1971 Yamaha XS1
#yamahamotorcycles #caferacer #xs650 #timing #motorcyclerepair #yamaha
Check out Amazon for XS650 stuff, at the best prices and they will bring it to your door.
Mikuni 34mm Pre-Jetted Carburetor Carbs Yamaha XS650 VM34-XS650 amzn.to/2JbLIY1
TC Bros. XS650 Billet Aluminum Intake Manifolds amzn.to/2HQlifc
Voltage Regulator For Yamaha Motorcycle RD400 TX650 XS650 /1976-82 amzn.to/2HNBz4i
Emgo Ignition Coil for XS650 with points amzn.to/2Hg1Ye5
Amazon 1970-1982 Yamaha XS1 XS2 TX650 XS650 Clymer Motorcycle Repair Manual amzn.to/2hwzVpX
Amazon ignition points amzn.to/2gTkx7D
Amazon Automotive dwell meter amzn.to/2gTTydy
Amazon inductive Timing Light amzn.to/2hDgFul
Pictures paint a thousand words but a movie leaves nothing to chance. I knew all of what you said but to see somebody doing the job in a calm and organised manner gives one a lot more confidence.
where were you 10 years ago i did it all bass ackwards. i had a xs1b. was a nice bike
Great job breaking it down to the basics. I was surprised the timing was still off even though you had set it statically.
Static timing is a good starting point.With a strobe much more accurate.
I like this .. This is my favorite motorcycle timing video
Great job. Easy peasy when someone shows you how to do it. Thanks a bunch!!
Glad it helped!
Thanks you - was very helpful to my son and I as we try to get his 1978 XS 650 tuned in - has been back firing, and he about broke his ankle yesterday while attempting a kick start
Yeah sounds like too advanced.NEVER have your leg fully straight locked when kicking through!
Awesome!! You remind me to my motorcycle mechanic who loves veteran bikes, thanks for sharing this info!!
Good, clear instruction with appropriate explanations. Thank you.
Thanks so much for your video, I have a TX 750 and I'd say the dwell setting are the same as the XS 650 , great video.
Thanks for this. Great info. One suggestion. Even though your advance is OK, it would have been nice to see how you adjust it in any case......!
Great suggestion! So I will explain. First, I want to make sure the advance is working properly when the engine is running. Full advance at 3000-3500 rpm. If the advance timing mark didn't line at full advance, at around 3500 RPM, I would adjust the back timing plate until it did, and this is why I would make this trade off. If the F timing mark is off a little bit at idle, the engine will be fine, but if the full advance mark is off, I will ether not make full power if it is retarded or risk preignition if it is overly advanced, and the we start melting pistons under heavy loads at higher rpms. We don't want to go there. You can make adjustments to to the advance unit, but you better really know what your doing. I think Yamaha have it figured out pretty well. I would stick with the stock set up If you want your engine to last.
That was an excellent & informative video.Highly recommended.I am in the process of doing up a 76 XS750 Triple with points.This will give me great insight into getting it timed right.Thank you.
Good explanation and a nice bike. I have always liked Yamaha best.
Nice work!
Thanks for the visit
good job1
Thank you for the excellent videos sure wish I had the same instrument that you have. What is it called?
the one unit is called a dwell meter and the other is an inductive timing light.
excellent,
keep on brother...
HEllo, how is it I can get the right one to set properly( right at timing mark) but the left one is wayyyyyy off and I cant adjust it, can the dwell be off that much?
If the dwell is way off you will either get a very weak spark or the coil will over heat depending on which way it is off. Things to check. Either the points are worn out or bent at the contact. Or the backing plate is loose in the pocket of the engine and when you adjust the timing of the engine it changes the dwell setting on both points and you chase your ass trying to set them properly.
@@Amotorcyclenut or the condenser is missing 🤣
Great video
Thanks!
Hello there is have a 79 xs650, it runs fine during idle but dies when any fuel is given at all. I cleaned carbs and still the same thing. any ideas?
Make sure your timing is set correctly. You have to determine if you are starving for fuel or flooding. Remove air filters, especially if you have pods on them. See if the sides move. First with your finger, then when is running. If not fix it. Carb bowl gaskets need to be in good shape or replace them. float level is also important. If you didn't clean all the little holes and jets in the bowl you'll need to do that. Check for air leaks also. Hope that helps .
Why do you set the meter to 4cyl ?...
Because it's the lowest setting on the dwell meter. The factory dwell spec for the points is 90 degrees divided by 4 is 22.5 degrees.
@@Amotorcyclenut just so I'm understanding correctly. IF you have a dwell meter that had a 2 cylinder setting. You would set the points at 45 degrees?
True if the engine has two sets of points.. If you get confused for some reason. set the points with the dwell meter and double check the gap with a feeler gauge. should be .012-.016". The purpose of the dwell meter is to get both sets of points to have the same dwell angle so that the cylinders fire the same. You might have to adjust the dwell angle slightly on both sets of points to get it to fire at the correct place with the timing plate that the points are mounted to depending on the condition of your points.
what if the right side is not firing at all but the left is
Then you need to see if that side has power making it to the points. Then check the spark plug, spark plug cap, coil, all the connectors to that side, points and static timing. If its an ignition problem you'll find it. If it's not it might be an air/ fuel or lack of compression problem.