Approximately how long bleeding the caliper (minutes/seconds) and approximately how much brake fluid should be expected to be used and should I add it before or after? Thank you.
Great video! I subbed , I need all the visuals I can get lol, cuz ....I'm attempting to do the rear calipers and rotors on my 2013 caravan...is there anything I need to know besides having to rotate the piston clockwise to compress it..after that. should be straight forward I imagine...thanx for the helpful videos ..keep em coming ...
For Bracket bolts 2012 and older 125ft lbs 2013 and later 150ft lbs Guide pin bolts 26ft lbs (all models) Hey Brother, @08:38 in the video what did put in the brake line connector? Was that the old washer?
I have the same vehicle And when I’m driving and slow down for red light or stop sign jerking and rumbling and then stalls and I’ll try to start it , it starts and as I go into gear D it just jerks a little and stalls or it just stalls I tried to look underneath and seen around the transmission is like oily I don’t have good enough jacks to really get under and look but idk maybe someone can point me in the right direction
That hose clamp & gravity bleed was clutch. Saved me many hundreds. Thanks for the vid!
Very informative thanks for the video gonna change mine tomorrow
Excellent camera angle, thanks 🙏
Excellent! Thanks so much. The explanation was great!
Good vid only why didnt you hook the caliper on something instead of letting it just hang
Approximately how long bleeding the caliper (minutes/seconds) and approximately how much brake fluid should be expected to be used and should I add it before or after? Thank you.
Great video! I subbed , I need all the visuals I can get lol, cuz ....I'm attempting to do the rear calipers and rotors on my 2013 caravan...is there anything I need to know besides having to rotate the piston clockwise to compress it..after that. should be straight forward I imagine...thanx for the helpful videos ..keep em coming ...
You are the best.....Thanks
Love the info and video.
I am just not a fan of using impact wrench to tighten screws.
For Bracket bolts
2012 and older 125ft lbs
2013 and later 150ft lbs
Guide pin bolts 26ft lbs (all models)
Hey Brother, @08:38 in the video what did put in the brake line connector? Was that the old washer?
Great video. You forgot to tell us the tiny bolts snap easily.. DO NOT CRANK ON TINY BOLTS AT ALL.. JUST A LITTLE SNUG.
Great job
Did you start the car to drain?
no
Thank you
great
I have the same vehicle
And when I’m driving and slow down for red light or stop sign jerking and rumbling and then stalls and I’ll try to start it , it starts and as I go into gear D it just jerks a little and stalls or it just stalls
I tried to look underneath and seen around the transmission is like oily I don’t have good enough jacks to really get under and look but idk maybe someone can point me in the right direction
It sounds like it's low on oil
I have trust issues. I would have still checked the slide pins to make sure they’re greased lol
I was thinking throttle body
You need to horizontally flip this. Too confusing.
Not a good show