Troubleshooting Intermittent AC Malfunction for a Nissan Frontier
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- We are going over the steps to determine the cause of the AC kicking off when the blower fan speeds are between 1-3 and not 4 for a 2009 Nissan Frontier XE (L4 - QR25DE - Manual A/C Type 2).
1. Show the Problem - 0:10
2. Step 1 (Disconnect Blower Motor Resistor) - 1:06
3. Step 2 (Remove Blower Motor Resistor) - 1:24
4. Step 3 (Check Continuity Between Terminals) - 2:10
5. Step 4 (Install New Blower Motor Resistor) - 2:57
6. Step 5 (Connect Blower Motor Resistor) - 3:40
7. Step 6 (Retest AC Functions) - 3:52
Products Used:
This video contains affiliate links for which I may receive compensation.
Blower Motor Resistor - amzn.to/3ObqttK
Handheld Oscilloscope Multimeter - amzn.to/3NS6BL3
Tools:
1/4" Socket Wrench
7/32" Socket or
5.5mm Socket
Multimeter
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on TH-cam is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on TH-cam. Use this information at your own risk.
#Nissan
Yay another frontier video.. thanks man I love your videos
Thank you!!!
Replacing mine worked great. Thank you for the Info I sure appreciate your video..
That's awesome. Great job
Had the exact same problem...Thanks for the help. All good now with a new Resistor!
Nice!!! I'm very glad it helped. 😀
Mine is having a similar issue but it works on 3. It'll shut off intermittently. Do you think it's the same issue?
Sounds like it. You can take the part off and test it, just to be sure.
I do have an issue with my heater in my frontier. When my heater is on at a stop light it blows cool air. When I am driving the air gets hot. Any ideas ?
Could be your coolant level (low) or possibly your thermostat is faulty. It is difficult to say without troubleshooting.
Maybe vent is open
what if the blower works in the 4 levels, but the compressor doesn't clutch. if I remove the relay and connect with a cable, the A/C works correctly. What could be the failure?
Could be a small list of items, such as bad relay, faulty wiring, intake sensor, A/C Button, etc. Would need to troubleshoot to narrow the problem down.
The relay receive some signal from any sensor? I removed the A/C relay and connect directly with a cable and the A/C works correctly.
smd capacitors in the a/c switch board
replace the smd capacitors inside the A/C Switch panel
I thought it was the motor and the resistor but it’s not working. Not blowing any air
Could be the fuse
My OBD reader isn't working
That's not good
price is resistan
?
Damn.. 1-4 all died today
Hmmm....could be the motor