Free Cura Slicer V5.0 Profiles - Fine Detail to Hyper Fast
ฝัง
- เผยแพร่เมื่อ 7 ก.ค. 2022
- Chuck just released a set of Cura Slicer Version 5.0 Profiles. He explains them here and also introduces a new Hyper Fast Profile that is really fast. He also offers all of them for free at the links below. The same sample print went from 2 hrs with excellent detail down to 22 minutes in Hyper Fast mode for a quick functional print.
Learn all about them on this episode of Filament Friday.
********* Ender Style Cura Profiles Download Links: *******
Best (0.12) : thangs.com/file/1057729
Good (0.20) : thangs.com/file/1057731
Extra Fast (0.28) : thangs.com/file/1057732
Hyper Fast (0.32) : thangs.com/file/1057733
TPU thangs.com/file/1057734
Filament Friday E-Leveler Tool
amzn.to/3ishwM1
Filament Friday Tool Kit:
amzn.to/2MOR00X
Popular Prints:
CHEP Cube Test Print: social.thangs.com/m/21739
CHEP PTFE Cutter Tool: social.thangs.com/m/23507
CHEP Pawn: social.thangs.com/m/29643
**** Support the Channel *****************
Financial Support through Patreon:
/ elproducts
***** Ender 2 Pro (Shown in the video) *****
Creality Official Reseller Comgrow: bit.ly/3tnLuHn
Amazon: amzn.to/3sLuSaW
***** Creality Ender 3 Pro: *****
Creality Official Reseller Comgrow: bit.ly/2SIMa86
Bundle From MatterHackers: bit.ly/2FuKFpu
Note:
As an Amazon Associate, I earn from qualifying purchases.
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************
Chuck's Arduino Book:
amzn.to/3tA31JP
Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter.
*************** Free Filament Friday Sticker **************
Send Self Addressed Stamped Envelope to:
Electronic Products
P.O.Box 251
Milford, MI 48381
********************************************************** - แนวปฏิบัติและการใช้ชีวิต
Would you consider spending some time in your videos on profiles explaining which settings actually made the difference to speed, and what bottlenecks you hit against going faster? I feel like a lot of folks see this all as just black boxes rather than knowable principles they can use and build on.
Would like to see this as well.
From my own experience hotend flow rate and cooling becomes the limiting factors at high speeds.
Been using your xtrafast profile for big "functional" cosplay parts that are going to be post processed anyways and it is amazing, i can't wait to try this New profiles
Same. Able to print my 1:12 scale diorama hole lot faster. Gonna try this one out now.
Oh yeah for sure I'm using that profile for mine aswell helps cut times in half so quickly super nice
❤️
I’ve been doing the same!! I cuz my times from 24 hours to about 12-13 hours
Thanks Chuck. I'm amazed at the speed I can get with these and not loose quality. Love your channel, very helpful.
Was waiting those ones heavily 🙏 Thank you. Your profiles are so awesome and excellent base to start building our own for other machines. Great work!
Thank you Since I found your channel I have learnt so much about 3D printing. I love how you share your experiences with us
Not only have these profiles saved me countless hours, the extruder arm on my Ender 3v2 just broke. When I bought it I printed a spare from somewhere, and now my printer is up and running again. I don't know where the STL for the arm came from, but it says CHEP underneath.
Have a coffee (or beer) on me. Cheers.
Thank you for releasing this I have been using your profiles for a few weeks And I love them they print so nice. Now I'll have to try 5.0
I am currently using the Fast and HyperFast profiles for printing the parts for the Lowrider v3 CNC and I am pretty amazed at how good the finished product looks and how solid the pieces feel for the amount of time it takes to print them. Thanks for sharing all your hard work with the rest of the world, Chuck!
Hi is there any fast cura profiles for the ender 3 s1 printer range cause of it's a direct drive extruder do we need to change the retraction numbers on cura or leave as is?
Thanks😊
Thanks, Chuck. Are you going to change your TPU profile, too?
Thank you Chuck. I've been looking forward to your updated profiles. They look fantastic.
Thanks for your time and effort you put into releasing these. I look forward to downloading and playing with the profiles
Brilliant video as always. These profiles are fantastic and work great thank you. I am changing to a 0.6 nozzle on my E3 V2, when will you be doing some 0.6 profiles?
Working on them.
@@FilamentFriday thank you sir
@@FilamentFriday Yes please Sir, can't wait for 0.6 nozzle profile (Best). Can I also say great work, your profiles have taken my prints to the next level. Amazing work Sir.
@@FilamentFriday you just got a new sub then, love this 0.6 nozzle
Hey Chep, do you have any profiles for TPU?
It’s coming next.
Thank you very much for the profiles, I spend so much time using yours than testing myself each configuration. Really thanks for sharing
Great work as always. I know it takes a ton of your time developing these. It is greatly appreciated!
The Extra Fast profile has the correct name label but it installs as the 0.2 Good profile. It could of course be that I am doing something wrong.
I'm getting the same thing.
Same here
Me also.
Th last fast profile completeley cocked my Cura up, it changed the bed to Ender V2 size and support density started changing itself to 100% and I cant print more than 2 multiples of parts as it then throws the parts off the build area, I ended up having to back up my computer and re- install LInux, I tried removing everything associated with Cura including going into the user folder but that would not solve the issue after a reinstall of Cura
thats why you dont trust random profiles on the internet.
@@user-yk1cw8im4h You live and you learn! next time I will install to one of the junk PC's I have or create a different Cura profile, I did ask in the preview post to make a list of changed settings but no reply
thank you very much Chep for these fantastic profiles ,i tried from 0.20 to .32 and it still great impressively !
I have watched so many of your videos, but I rarely comment. Thank you for these, you are a major help to the community. Your videos are very helpful and your Filament Friday Toolkits do a great job!!!
Thank You
FYI: You can use these profiles with any printer. Just start with a Creality machine profile in Cura to see the profiles. Pick a machine profile that matches the size of your printer.
They are designed for PLA and 0.4 nozzle on bowden setup. Here is how to load them:
th-cam.com/video/EJD1hCJpM_w/w-d-xo.html
You can increase the temp for PETG and reduce retraction for direct drive.
Hi Chuck. I am quite new to this - what would you suggest reducing the retraction to for PETG? Thanks
Don’t change retraction just temp for PETG. Try 225°C
@@FilamentFriday sorry, just to clarify I have the S1 pro (direct drive)
I have been watching lots of your videos this evening so will be taking them all on board and doing lots of test prints. Thanks again
Before I waste any filament, what issues may come up if I use this on a Direct drive (E3 S1) and are they easy to fix? Thanks @CHEP
@@rhysthomas1915 LOWER THE RETRACTION FOR GOD SAKE on the S1. This profile is for bowden
So I found that if I increased the hot end temp the hyper fast profile prints come out way better to the point of almost no difference form the regular fast print profile.
too what temp?
@@reecephillips3090 220c
Been using your profiles for years, thanks again!!!
I had kind of problem with stringing using the profile. I decided to reload the firmware for a E3 mini v1.2. Now your settings work extremely fine. thank you for what you do to the 3d community.
Hi Chuck, are you planning on releasing profiles for 0.6 nozzles? It'll be interesting to see if you can get the hyper fast to the next level :)
Yes
@@FilamentFriday Hate to nag, but very much looking forward to this :D
0.6 is the way to go!
About 2 more weeks.
@@FilamentFriday thanks!🙂
on thangs profile 0.2 and 0.28 are same
@FilamentFriday Could you please take a look at the 0.28 download? I'm running into the same thing. Thanks for the great profiles!
I found the same thing!!
same - hope it is updated soon, these profiles are the best out there. @FilamentFriday
Thanks Chuck, great work with these fast profiles.
Thanks Chep, really appreciate all the hard work you put in helping out the community
Why not use a free google drive? It's annoying to have to join a website and get my email spammed to try out your "free" profile for prototyping a mechanical part.
Or I could just skip all the work and not share them at all.
@@FilamentFriday That domain is paying you then? You said "free to download" so I asked why you use that registration required domain. If that is what is your idea of sharing ideas with others, then come up with a US dollar price and tell us said price.
@Jason Gunn how better to support someone's effort then to buy their product? You highlight this bitching but won't state a price to buy these "free" profiles? Why not?
@@FilamentFriday No offense dude but you sound like a 15 yr old saying that. This person makes a valid point and you instantly go all "im taking my ball and going home". You know more about printers then i ever will but making your fans go through extra steps for shits and giggles to get your profile is dumb. You also not taking accurate and correct feedback is also dumb. No hate bud, it just sucks to see that you are "that" kind of guy.
@Jason Gunn Dont be a bootlicker man. Its not a good look.
"free" not so "free" when you have to be a bronze member of his site to access his "free" profiles...
Not true. The links in description are to the free profiles. Bronze is for expanded library of profiles and more plus it supports my work to offer the videos and the truly free profiles.
Chuck you are awesome! Thank you for giving these profiles out. I've needed to print a hard drive cage for a NAS for a long time so when I saw this video I immediately added your profiles and saved a lot of time using the Extra Fast profile. besides it going way faster than the default low quality Cura profile, it still looks really good.
Thanks for this. Ive been printing for 2 years now and your profiles helped me a lot. Most of my personalized profiles are based on yours. Now this one will be my next goto profile for sure!!
Chep. Plese stop using these model downloads, and just upload the profiles. You are exporting your entire Cura scene, and I am now using your Ender 2 Pro profile on two of my Ender 3s which both have Sprite Pros, and not stock bowden tube setups. I also could not save the profile as a new profile until I changed things, which means I also have to take extra steps to make sure I have backups of these profiles when I modify them
If you're using the Sprite Pro, also make sure to change retraction distance from 6 mm to 0.8 mm.
@@DKFX1 I'm using .5mm retraction
Thanks for these profiles chuck i recently upgraded my ender 3 pro to an SKR Mini V3.0 mainboard and been looking for a good profile and was remineded of your channel keep up the wonderful work a fan from Saudi Arabia
I'm new to this whole 3d printing realm. Your videos were the first I found for help here and there. Man I love your channel 👌 you do an amazing job talking about and describing everything for someone new to this
Glad to help.
Thanks for all your hard work! I Always use your profiles, fast and reliable!
Hey, thanks a lot for the profiles! It was impossible to do a good print since I switched to klipper, but after some fine tuning and the use of your profiles, it's really nice now! 🙂 I just changed the flow rate to 100% and it's perfect
These profiles are awesome!!! I had my profiles honed in, and then cura 5.0 came out and I started having problems. These profiles were on point and definitely gives me a good reference point to compare with my profiles. Thanks Chuck!!!
that is awesome. Ive been using your fast profile and I was waiting for you to release one for Cura 5. I'll be definitely trying the hyper profile.
Perfect timing, I was just looking for these yesterday.
CHEP - thanks so much for these profiles! They are saving me a ton of time.
Thank you, Chuck!
Best regards from Brazil!
Man Chuck! You are a lifesaver. Your file did not work with my FlashForge Adventurer 4 so I made a Good and Best from hand using your exact setting and it seems to be printing way better. Also, I actually edited your Ender files to 220 200 and 250 and changed the start and stop codes and it was one of my best prints ever. Thanks.
Thanks Chuck! I just got an Ender 2 Pro for my parents house and I'm loving it, these profiles gonna make it even better.
Chuck I tested both the .28 and .20 from the patreon site and both worked great. I do mostly functional printing and these profiles have changed everting. I can't tell you how much faster and even better my prints are now. I've said it before and I'll say it again....U DA MAN!!!
Thanks for the profiles, your extra fast works very good. I have a e3 v2 with sprite pro and had to change a few settings with retraction but I've got a lot better with all the calibrations and the prints are coming out perfectly and beautifully. Thank you for all of this.
Awesome Chuck, thank you! Always love your profiles and use them on my CR-10 v1 all the time with minor if any tweaks. They print great! Can't wait to try these ones out, including the Hyper-fast one...really interested in seeing how my printer handles it. Thanks again for all the hard work and time you put in for the community!!!
How do you download them? The links take me to stl files
That's awesome. Thank you for updating and sharing your awesome Cura profiles, which took my printing experience to another level.
Also, I got pretty much excited while watching you, had a feeling that I was watching an impressive product launch video of Apple or smth. :D
Been using the ExtraFast Profile for about 10 prints now. Changes some retraction distance and speed but that baby is rolling. Pretty much my go to now, thank you.
Woo hoo!! I've been waiting for these to be released!
Thank you! The hyper fast profile has been a game changer for me. I mostly print large items with minimal details so speed matters to me more than quality since I sand and paint everything anyway. I was previously using a .6 on "Draft" settings and this is still faster even with the .4 nozzle.
I'm going to try the 0.12 profile. Excited !
Just a quickie, Chuck..... I downloaded your best profile for my Ender2 Pro, using Cura 5.3. The "best" took 1hr 38mins and is virtually perfect!! Thank you!!
I just printed a church in white for my wife... I accidently printed with this profile and I have absolutely no regrets... it came out awesome... (it's not perfect quality but my wife loves it) I put lights in the church so she could make it glow. Thanks CHEP!!! I learn so much from your channel!
I truly appreciate your generosity.
Thank you! I'd been hoping you would do this.
Thanks for doing all that work for the sake of the community!
Thanks for adding these,I've been using your FF 0.28 Extra fast profile most and really looking forward to trying these out,I will update your existing Good,Best profiles from previous with these
Same here
Thanks chep, saves me loads of time on functional prints on my projects
Just, thank you! A thousand! Best profiles ever!
Great Profiles! Thx for sharing with us. Greeting from Germany
Thanks for sharing the profiles!
Thanks, I've had my printer and Ender 3 S1 Pro a week, Your videos are a big help to keep me motivated when i have a failure.
I look forward to trying your settings.
Thanks again from Australia.
Also read the comments and found the advice to set retraction to 1 - 2 mm for my printer.
Thanks again.
Had almost always used your extra fast profile very often since it released. Cant wait top use your new Profiles!
I have to confess that your profiles helped me a lot. I have an Anycubic Vyper. All i had to do was change the values to match my machine. Works great. Thang you a lot.
would you please provide a screenshot of the settings or profile I have any cubic viper to..
Dear Chuck: If I hadn't tried it, I wouldn't have believed that it would be possible to get very good quality prints with your extrafast profile! Fantastic: Prints that would take 5 hours in less than 2.
I haven't tried hyperfast yet, but I have no doubts about its efficiency and speed. My printer is an "old" but very functional and reliable ENDER3 and the profile works wonderfully.
Thank you very much for your excellent work that I hope I can continue to learn and enjoy!
Superb chep. eagerly waited for your profile for V5.
thanks a lot man.
Printed 0.32 HYPERFAST PETG with my ender 3 v1 with no issues. YOU ROCK!!!!
WOW!!!! After tinkering for a couple months with my Ender 3 S1 and getting "okay-ish" prints - your Good Profile is incredible! I'm using MRISCOC Professional Firmware, and only changed Retraction Distance to 3mm, Bed Temp to 65 (its colder in my basement), and PLA+ Temp to 210. I honestly didn't think my prints would ever look this nice. Thank you Thank you!!!!
You’re welcome.
I"m just starting out, thanks for all the help so far. Been messing with these profiles today on my S1 pro. The extra fast really cooks my motors any chance of something between Good and Extrafast lol. I"m not lazy, just dont have enough knowledge yet and the build times are killing me 😉, keep up the good work 👍
wonderful and very functional. Thanks for sharing.
hey everyone, hey Chep, I've been using these profiles with Cura 5.2.1 with only minor tweaks to match my printer and it's been working amazingly, great job Chep...I'm looking forward to more news, keep doing what you've been doing until now and better.
Amazing buddy I use your extra fast profile for everything now 😂 can’t wait to try this! Cheers keep up the excellent work 👍
Saludos desde Colombia CHEP, muy agradecido por tus aportes!!!
Hi, newbie here (just one week of printing :). I tested your Extra Fast profile with an Ender V3. Excellent results. I printed a door handle, went from 2 hours with Cura standard quality to 33 minutes with your profile. Functional and good looking part. Thank you very much for your work and greetings from Argentina.
Glad you liked it.
Amazing! Thank you so much CHEP!
Thank you so much for this. It worked perfectly on my ender 3 s1 pro with Cura 5.30. Super fast prints. My 3d printer has just become a lot more useful. Cheers.
because of you i have gone from total noob to mediocre 3d printer in this month. you sir are a legend
You are a genius! I printed a part that was supposed to be 20 hours in only 9 hours using hyper fast. Thanks!!
Thanks for the profiles!
These profiles are amazing!
Big Thanks Sir..., I am new to 3D print, learned a lot from your videos.
70 next birthday and have just got my first ever printer, Ender 3 Pro. I am in the middle of printing the sample dog and I am absolutely blown away by it. The print has just got past the dogs tail, me and my good lady are opened mouthed watching it. The technology is amazing, What next? you can't help but ask oneself.
Even to a complete novice your video's make for good viewing @CHEP so I thank you for that, I have subscribed and will watch some more over the next few days. Keep up the great work.
I had basically shelved my printer from August last year until just a couple months ago. After disassembling EVERYTHING down to the left vertical and horizontal and resquaring, I found out the center support bar was bowed, FINALLY what the BLTouch was seeing!
That complete, I now had to look at Cura. I was still running 4.13 and 5.0 was JUST about to come out. Once it did, I knew you wouldn't be far behind with a new version, but I at least compared the default "standard" profile, your last 4.1 profile, your FAST profiles, and my old "hybrid" of yours and my own adjustments. It was good to hear you saying "I modified it with *some* of his settings".
To do this, I have a database (from my former life) that imports EVERYTHING in the "quality settings" folders as well as any special ones I don't want to load into Cura, but just want to compare. it then lets me pick and choose from list boxes which setting I want to import into a new profile, and then export it.
I've been printing tabletop miniatures for the last couple days with a .12 profile and last night I used your "Best" profile as the basis, combining it with the settings of 3D Printing General, and the support settings from 3D Printerly (which just happen to be a blend of 3DPG and your profiles and their own tweaks).
The minis came out great. Now...I have a host of tree supports to remove. Thank you for all that you do!
This really brings out the "rapid" in rapid prototyping, these profiles sound perfect for quick iterations during development.
Great job on getting a new video out so soon. Nice! And thank you for the shout-out. Happy you could use some of my Cura setting:) I tried your Hyper-fast profile, and it works flawlessly, its only a couple minutes slower than the profile I sent you, but I notice a quality improvement. Regarding your "goodprofile" on 0.2mm it's not something I'm going to use since it's only 5%-10% faster than the "standard" profile you get on Cura and quality is same or slightly worse. I have developed a Good quality 0.2mm profile off your "Xtrafast" 0.28mm profile and it's only about 30% slower than your hyperfast profile, 8% slower than your Xtrafast. Have a good one.
This works way better then the former fast profile with Cura 5.3.0. Thanks a lot!
The master, the legend at it again 👍
Hi Chuck! Thanks for your videos!
I'm new to 3D printing (Started in July & have an E5+ with mostly stock parts). I've been using/learning Prusaslicer, but since I see you create custom profiles, I think I'm going to change to Cura. I'm loving/hating the learning process, but I think your help & settings will have me loving, more than hating :D
I''ve downloaded Cura and will try some of these. Thanks again!
I found out your hyperfast profile is great for boardgame inserts! This saves me so much time and most designs feature simple token holders and card holders which really don't have nor need high details ;) Really advised to my fellow boardgame friends out there, this speeds up the printing of inserts by multiple hours.
Profiles look great, thank you. The hyper profile came just at the right time for a few large functional pieces that dont need to be pretty, and its worked a treat on them, supports on the Hyper
profile also break away really clean.
Clearly I am missing something. How do you import the settings from the 3mf file. when I load it into cura 5, nothing changes. Can you help?
Go into settings and you'll find the setting "Default behaviour when opening a project file", select "always ask" in the drop down.
@@FilamentFriday I have that set. stderr.log raises errors when using some ender2 files, I have an ender 3. I just opened an issue in the cura community ( not yet bug, because I am sure I am causing it some how. )
Thanks for the response and the work you do for the community.
EDIT: Help on FB suggested it may be the Start-up Optimizer causing issues, and when I disabled it, I was able to import the 3mf as a project.
So, is this a Start-up Optimizer issue, Cura importer issue, or user error?
Wow absolutely amazing results with the Extra Fast profile. I make and sell cookie stamps. Using my stock Ender 3 V2 profile it took 4 hours to print a cookie stamp. Using the Extra Fast profile 1 hour and 4 minutes and the quality is great for what I need it to be for these stamps. Absolutely astounded. This saves me having to expand my print farm. Thank you Chep!
Glad to help
Awesome as always! Thank you!!!
These settings have made some of the fastest prints and surprisingly cleanest infill I’ve seen to date!
Edit: the Extra fast profile is what I used, with a few tweaks to wall thicknesses top/bottom layer thickness, and support systems
Awesome, thanks Chuck!
You sir are a hero. I can finally move to cura5.
glad you sorted the .28 profile I was getting the gaps as well and was stumped and thought it was me
Awesome work as usual
Thanks for all you do!
I was able to take your profile and use it for printing miniatures pretty well. Just changed the layer height to .08 and the temp for my printer and the results are nice.