Extra Fast 0.6 Nozzle Cura Profile
ฝัง
- เผยแพร่เมื่อ 1 ก.ย. 2022
- Chuck releases his 0.6 nozzle Extra Fast profile for Cura. This new profile will help you print practical prints much faster than the standard 0.6 profiles in Cura. He demonstrates it on a practical print: Boat Motor Prop Block.
Cura 0.6 Nozzle Extra Fast Profile: thangs.com/file/315828
Nozzle Removal Tool:
Palm Ratchet: amzn.to/3qPs3pB
1/4'' Socket: amzn.to/2OjdHdg
Replacement Nozzles for CR10/Ender 3:
amzn.to/2m39K1y
Other Extra Fast 0.4 nozzle Cura V5.1 Profiles:
Cura V5.1 0.28 Extra Fast Profile: social.thangs.com/m/224865
Cura V5.1 0.20 Extra Fast Profile: social.thangs.com/m/224867
Cura V5.1 0.12 Extra Fast Profile: social.thangs.com/m/224868
More Cura V5.0 Profiles Download Links:
-------------------
Best (0.12) : social.thangs.com/m/886541
Good (0.20) : social.thangs.com/m/905696
Extra Fast (0.28) : social.thangs.com/m/887557
Hyper Fast (0.32) : social.thangs.com/m/186263
TPU Profile & Sample file: social.thangs.com/m/198565
Filament Friday E-Leveler Tool
amzn.to/3ishwM1
Filament Friday Tool Kit:
amzn.to/2MOR00X
Popular Prints:
CHEP Cube Test Print: social.thangs.com/m/21739
CHEP PTFE Cutter Tool: social.thangs.com/m/23507
CHEP Pawn: social.thangs.com/m/29643
********* Ender Style Cura Profiles Download Links: *******
Best (0.12) : thangs.com/file/1075768
Good (0.20) : thangs.com/file/1075769
Extra Fast (0.28) : thangs.com/file/1075772
Hyper Fast (0.32) : thangs.com/file/1075773
TPU thangs.com/file/1075775
**** Support the Channel *****************
Financial Support through Patreon:
/ elproducts
***** Ender 2 Pro (Shown in the video) *****
Creality Official Reseller Comgrow: bit.ly/3tnLuHn
Amazon: amzn.to/3sLuSaW
***** Creality Ender 3 Pro: *****
Creality Official Reseller Comgrow: bit.ly/2SIMa86
Bundle From MatterHackers: bit.ly/2FuKFpu
Note:
As an Amazon Associate, I earn from qualifying purchases.
**************** Creality Ender 3 Parts/Upgrades *********************
Ender 3 Glass Bed:
Amazon: amzn.to/3tYea7m
X-Axis Tensioner
amzn.to/38BKbYP
Y-Axis Tensioner
amzn.to/2PhOdhi
Chuck's Favorite EZR Extruder:
bit.ly/2rlKCpp
Creality 8-bit Silent Stepper Board: amzn.to/2YPM0Nh
Cap Tubes & Couplings: amzn.to/2Vf8BCf
CR10/Creality Ender 3 Nozzles: amzn.to/2m39K1y
CR10/Ender3 Silicon Heater Block Cover: amzn.to/3sfDG7s
Solder Sleeve Kit: amzn.to/2Pqqngm
Creality Ender 3 Fan Set (24v): amzn.to/38u9aOl
CR-10 Fan Set (12v): amzn.to/2PrcCxK
T-Nuts Kit: amzn.to/2LsQZg8
Screw Kit: amzn.to/2Va8uGK
Temperature Meter Used in Videos: amzn.to/2JpUJOC
Screwdriver set used in Videos: amzn.to/2PbWocM
Creality Ender 3 Upgrade Package (Extruder, Silent Board & Capricorn Tubing): bit.ly/2MNvmcs
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************
Chuck's Arduino Book:
amzn.to/3tA31JP
Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter.
*************** Free Filament Friday Sticker **************
Send Self Addressed Stamped Envelope to:
Electronic Products
P.O.Box 251
Milford, MI 48381
********************************************************** - แนวปฏิบัติและการใช้ชีวิต
Who ever said you are lazy needs to have their heads examined - Please keep up the good work you are doing helping us
I for one would love some videos going into the detail changes you made from the stock to your fast profiles. Knowing those steps is way more important for us who do not have the same printer and hence want to do similar changes for their own profiles or similar things in Prusa- or SuperSlicer.
Too much to cover. You can do a compare if you want.
@@FilamentFriday - This. Export the stock profile and the chep profile. Copy/paste them into Excel or use a diff tool to compare both profiles on a more granular level
All the hard work done again. You are invaluable to the 3D printing community. Thanks!
It really pisses me off that some a---hole would call you lazy of all people, a guy who does so much for our community, unbelievable. I'm getting ready to try out a .6 nozzle and sure enough, I knew you would come to the rescue :) I print almost only functional prints and the quality I get from my ender 3v2 and your FF profiles are incredible. Thanks Chuck U DA MAN!!!
I love that everyone is moving to the 0.6mm. I made the discovery last year when I tried to print wood PLA. 0.6mm works much better and makes the nozzle clog go away. Thank you CHEP for ALL that you give to this amazing community.
I haven't tried a .6, but the .8 changed my life
Follow up: I used your 0.6 profile on my Ender 3 S1, adjusting the layer hight to 0.3 and retraction to 0.8 and temp to 215 [my filament likes it hotter]. I turned a 3 hour print into a 1 hour print.....
Thank you for saving me even more time!
Excellent feedback. Try 0.32 instead of 0.3 and you might get slightly smoother results.
@@FilamentFriday I will try it. I am using a 0.4mm nozzle. So getting the results I do on setting for the 0.6mm nozzle is actually quite nice.
Your video came at just the right time as I have reprint dozens of parts because my 1 supplier made their product 1mm larger than the previous batch. So now I have to readjust and reprint everything to fit this crucial part. And THAT IS WAY I don't injection mold my components. My supplier isn't consistant across batches.
Thank you for making this video and sharing the profile. I was having some issues with a profile I was running in general and it was taking 10.5 hours for a part I was making. After using this profile, it reduced it to under 4 hours and fixed whatever weird stringing issues I was having as a bonus.
I've really been satisfied with making the switch to 0.6mm for most of my prints in the last few weeks, so to see this from you is very nice. In your last video about beating default 0.6mm Cure profile speeds with your ultra-fast 0.4 profile, I took that video as you sort of dismissing the use of 0.6mm for the sake of speed. I'm glad that this is not the case as I really have felt a lot of benefit from leaning on 0.6mm more heavily.
Wow, all I can say is your tireless efforts have made a huge impact on the 3d printing hobby. Thanks Chuck! 💪
Your .4 profile worked great. So glad you have the .6 for us as well.
Hi Chuck, I deeply appreciate what you have done! I've learnt alot from your tutorials and your clear explanations! Thank you for what you have done for this community! 👍👍
Thanks for your efforts. I really love your extra fast profile with the 0.4 nozzle on my ender 2 pro. I am using it for nearly all of my prints in the Workshop.
Thanks a lot for the time and effort you are putting to produce those profiles Chuck! They are always great and allow us to progress in the understanding of how our 3D Printer works. I'm currently building an Ender 5 Plus and came back to your channel to retrieve your video on the Ender hotend fix I just did. This video convinced me to migrate one of my printers to a 0.6 nozzle (probably my E3v2 that needs a maintenance 😉). I will definitely try this profile.
Hi Chuck, We really appreciate all your efforts in creating new profiles. It's a shame that someone was rude enough to say you were lazy. I watched many of your videos before I bought my Ender 3 in 2019 and you have helped me a lot since then. Thanks very much.
I'll be ordering some 0.6 nozzles now, thanks for all your work 👍🏻
AWESOME!!!! My printer has been giving me lots of trouble and your videos have been a huge help. Thank you for making these profiles available. Making it so newbies like me have a lot more fun much faster. Thanks again.
People are crazy. Your presence in the 3D printing community is priceless and we appreciate what you do!
Master of 3d printing and profiles, good work!
Very much appreciate this update! After installing the profile for a project of mine it went from a 6+ hr print to 4 for each of the 13 prints. I'm using a wood tone PETG at 100% infill to make a custom flooring transition between two rooms through what used to be an exterior wall. Each piece is 3" wide to match the wood floor slats but 8.5" long.
Fantastic job, Chuck! 😃
Thanks a bunch for all the profiles!
Stay safe there with your family! 🖖😊
I just tried your settings, holy moly it was perfect!!! Thank you so much!!!
Thank you so much for this profile! It works great on my modified Anycubic Mega Zero. I have been messing with the settings for a couple weeks to optimize it for speed but haven’t been able to quite get there. Now I can get some more sleep!
Your printing profiles have made me get back into printing, thank you.
Glad they helped.
I aleady print with 0.6 nozzle using your extra fast 0.4 profile on cura 4.13.1 and it`s printing great.I only changed the 0.4 nozzle to 0.6 profile and retraction settings in cura. I`m using ender 3 with BTT SKR-MINI E3 and an afternurner direct drive (from voron). I also made a TPU profile using your extra fast ptofile with some changes to the retraction and speed (still very fast and prints flawless). thank you for making these videos
Nice work - takes more work than people realise.
Thank you for all you do Chuck. Don't let the internet get you down, it's a wretched hive of scum and villainy. Most of us appreciate what you are doing for the community.
Hi. Nice video. Always see how much work you put into every episode.
I now have 2 Ender 2 Pro's and because they don't travel, I found a way to reduce the footprint even more by taking a long step in history. I moved the filament spool holder to the top by removing the cary handel. Shrunk my profile by 200mm on the X-Axis.
As I mass produce parts that fit inside the build volume of the Ender 2 Pro. This is an affordable addition to my print farm.
That's a sweet looking prop.
This is just what I was looking for, thanks so much!
I literally asked 2 days ago! What a great way to enter the .6 world!
Thank you! This is ideal for printing functional RC truck parts like interior wheel arches! 2 hr 30 using Cura standard low quality 0.28mm layer 0.4mm nozzle according to Cura. Using your 0.6mm Extra Fast Profile (with a 0.6mm nozzle), 48 minutes!
Congrats on your work!
Thank you Chuck. You make great content.
Thanks Chuck!!!!! I use your .4 fast profile. Now, I can use your .6!!!!
amazing research and knowledge, thank you for your amazing videos and profiles ,my best wishes for you in this holidays Sr.
Thank You
Been waiting for this one.
Thanks a lot for this, Chuck!
I'm with Chuck on this.., Heat up the Nozzle and perform the change. I've changed the nozzle several times on my Ender-2 Pro without breaking it using the hand-socket-wrench-tool!
I've since upgraded to a Slice Engineering Copperhead Hot Block and C-E Heat Break so my Capricorn PTFE Tube never gets hot on the end!
Thanks for the video, Chuck!
Thank you for All this work you have done
i appreciate it.
Greetings from germany
You’re welcome.
Well done. Thank you for your efforts
Thank you so much.
I can see why it took you so long to get it perfect. I tried to modify it to make it faster, and everything I tried broke it. My limiting factor is the standard Creality CR10s Pro V2's ability to melt filament fast enough. Even now, on long continuous lines I still get the occasional "clicking".
Is that what that clicking is? I figured it was because it was trying to push through on my ender 3 pro, but wasnt melted enough. Im very new to printing so thats what i assumed it was. I was originally printing at 205C with inland PLA, and i cranked it up to 215 and i almost never hear it now
I'm going to try this today on my anycubic vyper. I just got .6 nozzles can't wait to try this. Thanks!
Thanks Chuck, you are the best.
In case no one has said it yet, we really do appreciate your work good sir. You doing the back breaking brain boggling work so that we wouldn't have to is really much appreciated. As a sign of appreciation i will thumbs up every video you upload (that i come across or see) from now on.
Thank you.
@@FilamentFriday no sir. THANK YOU
Papa Kleb is back in action, love it!
Tried comparing the profile on my CR-6 Max with one I'm developing for .8mm nozzles. Compared to a 15 hr print on my .8 nozz, The .6 you made added 2 hours, but saved nearly 1/3rd of the plastic!
Once I do a few more tests i'd like to see if I can get the .8 to run a lil faster and maybe save some plastic. Thanks for the Profile Chuck! Gonna be fun testing it out!!
frankly i would of provided a custom profile that had a few extra gcode lines & send it to the wonderful critics that called you lazy for demanding something for free when they themselves are by definition a lazy leech. thanks for the profile it’s exactly what i needed. finally got a phaetus rapido uhf & it came with a 0.6 nozzle. it would of taken ages & alot of plastic wasted to make a profile that just works. thanks chep ✌️ you the man.
100%
Well I just had to post another "thank you", as this profile has been an absolute blessing for taking time off prints. Especially for big square pieces, like the external electronics box I'm currently printing for my Ender 3 V2. This profile, after some slight tweaking to compensate for my Micro Swiss direct drive / hot end, is making my E3v2 chug plastic faster than it ever has before. It's taking 12 hour prints down to 5 hours, with no visible loss in quality that I can see. In fact I even had to downgrade my filament roller, had to revert back to the stock Creality one, since my printed one was too slick with the roller bearings, and this profile would pull the filament so hard it caused the roll to spin WAY too much, and filament would pop off the roll. D'OH!!
Bravo Chuck, many thanks for the hard work you put into these things!!
i have a direct drive as well what settings did you change ?
@@FruitNinja20 Not many. The only tweak I did to the profile was for the direct drive, I usually run 1mm retraction, so I set that to 1mm and set the retraction distance window to 1mm as well (I think that's what it's called).
Awesome, I was hoping you were still working on a .6mm nozel profile! I know what I'll be testing this weekend
YES! THANK YOU
I‘d love a video about your process how you optimise your profiles
Hi Chuck, Thanks so much for the hard work you do on these profiles! I tried the FFV5.1_EF06NOZ(0.44) file and sliced it as is and got close to your time 2hr6min, but then I made one change, I changed the infill pattern to Cubic Subdivision and was able to get a time of 1hr59min. And even if you turn on Infill Travel Optimization it will reduce to 1hr56min
Hey John did you get lots of oozing at the corners of the print? I did. I could be the outer wall flow rate being too high, could be my filament not handling the 210 deg. nozzle temp (I usually print at 205). Also my extruder would click (slip) every 30 seconds or so which tells me flow/temp ratio too high. Anyway let me know thanks.
@@Ringwraith19 I never printed the file. I just sliced it to check the time I would get.
It would be amazing if you could also do a 0.8mm profile and a 1mm profile
Super cool, hugs from colombia
Just upgraded to a micro swiss and installed 0.6 nozzle and had amazing results on first print of a Milwaukee battery holder with your profile on my cr-6 se.
On Pla+ in Ultimaker Cura and 0.6mm tip I am running on Neptune3 tip 220°C bed 70°C. Using High Quality 0.12 profile but altered layer height to 0.4mm and all wall widths to 0.6mm. Initial layer line width of 110%. I am still making tweaks to this but may reduce height a bit to maybe 0.38mm on next run. I will keep posting tweaks if I get a better result.
Another good one thank you very much. BTW, "Cubic subdivision" infill pattern is even faster, just. 😉👍
Great profile, everything in my opinion on point. I hope there are CHEP profiles that utilize Klippers benefits in the future. Unfortunately, I'm not good at tweaking settings that work for me :(
thx a lot - i will try it SUPER
I love your cura profiles very much! I'm using them for my Elegoo Neptune 2S without any issue so far.
It's just a bit annoying that I have to manually make all the settings since Cura doesn't allow to load a Ender Profile into the Naptune profiles. I could just be using the Ender settings but eh...
I’ve been wanting to try some .6 nozzles.
INSANE...!!!! .4 nozzle w/.32 hyper fast file....!!!! I gave up on using .8mm nozzle...Detail and speed are awesome...!!!!! You are the man...!!!!! Thank you.....Note: have used this profile with PLA / PLA+ and PLA META from SUNLU....NO ISSUES....!!!! Excellent results....no need to change any temp settings...I just adjust the infill settings to my liking depending on the print....AWESOME...all the files...
Hey! You can also use bigger line widths than your nozzle too, get even more time savings.
Thank you.
For anyone having trouble loading the Profile with a different printer:
1. Open the .3mf file as a project
2. Settings -> Configure Setting Visabilty -> Profiles
3. Click on the Profile in italic (that is the currently used profile)
4. Click on the three line menu -> duplicate
Now the profile should be saved in you profile folder and you can switch printer, and can still use this profile
1:33 that was some smooth rhyming.
Great work Chuck! Don't sweat the naysayers. So appreciate the months of effort and flawless analysis and presentation. Noticed your profile used 80g vs 65g of filament.. hmmm.
Could you maybe compare print quality via chep cube with other nozzles and profiles? Wondering how much sacrifice on detail level. Just so I can choose that perfect Chep profile for each print!
thanks so much!
Thanks A LOT to you Chep (and team) all the way from Denmark.. You have been an enormeou help for me to get starting with 3D printing hobby.. Thanks a lot man..
When I have a design with corners (xy plane), I add little radius to keep a "constant" speed, even in the "corners". It is better too to improve the grip on the plate.
That is a good tip.
*QUICK QUESTION, does anyone know how to change the printing pattern (at least on the first layer) using CURA?*
The first layer sometimes is important and the "CR-10S PRO V2" print all over the place with no continuity across compare to "Ender 5 PLUS" print evenly from side to side and I am trying that the CR-10S PRO V2 prints like ENDER 5 PLUS, is there any solution to this? Thanks.
Can't wait for lighting fast 1.75mm profile ))
Amazing profile, this 0.6 profile is faster than the 0.8 one I was using before and looks a lot nicer. Can knock another 30 seconds off though if you reduce skirt down to 1 or turn it off all together. I do like having it but always go with 1 or 2 for sure not 3, every second counts :D
Would be intersting to see what you can do with the 0.8 though :D If you can get it looking nearly as good and any quicker I am all for it!
I’ve tried 0.8 but the stock Creality hotend can handle the volume of plastic quick enough.
@@FilamentFriday Which part of the hot end is the limiting factor, the heater element, the heat break, the hot block, the nozzle or a combination of these? I'm asking because I'd like to go from the stock 0.4 mm nozzle to a 0.6 mm one to print faster, and I simply don't know what I would need to upgrade for this. Ender v2 Neo with the soon to arrive bi-metal heat break, copper hot block and brass 0.6 mm nozzle. Thanks!
Try this: th-cam.com/video/dbJYQ4hYTMA/w-d-xo.html
consider.
using the topological optimization plugin with freecad
This might be a good profile to test printing that gaming table kickstarter Uncle Jesse was making videos about. I think the whole table is a estimated couple hundred hours of print time.
Love the block. Is there a link to download the file available?
Thanks!
Well said!
Thanks
Hey :) Could you please tell me which settings I’d need to change to use your profiles on my direct extruder machine? (Artillery x2)
Love your channel btw
I was just curious of what kind of boat your son owns?Are you all avid skiers,fishermen or pleasure boaters?Thank you for all your help!
Hi Chep, Thanks for the well explained and useful yt videos.👌
Do you also have a extra fast Cura profile for a 0, 8 mm nozzle, that I can use on my Anycubic Kobra max?
I really appreciate your extra fast 0,6 profile.
Thanks in advance👍☺️
I keep getting layer shifts on running the .2 extra fast setting with stone filament. I run it at 215 and even slowed down travel time. Any tips on retaining the speed and stopping the layer shifts?
Chep I enabled spiralize countours to this profile for some small “cups” and it went from 1 hour to 15 minutes! Is there a way to temp stop updating ezabl bed level because prints are so fast that’s half the time
What great performance improvement on Cura. However, I'm still wondering, that the Simplify3D-slicer 4.1.2 is still producing more details and is still faster then the CURA-Slicer (I compared both with as much as possible equal values)....I did not measured the real print time - just the calculated times. Again ... thumbs up for that CURA-print time improvement
During a couple years I'm using your 0.4 profile adapting to a 0.8mm nozzle. I think I've a 0.6 in home, let's try...
Testing the profile now :) I noticed the "Infill layer thickness" was set to 0.3 mm instead of 0.44 (= layer height). Is this a mistake or by design?
Hey Chuck! Thanks for the new profiles! But.. using these on Cura 5.1 has being giving me separating walls. (Side wall layers are separating from each other. They are glued together in the first layers, but stay separated up to the top layer on my Ender 2Pro. This started on your profiles after Cura 5.1. (Even when I use the 5.0 profiles.) Tips?!?
When you set your base line you said you were using Low Quality. At 1:57 when you slice the screen shows the Standard Quality profile?
i have a question regarding your old video about MAGIC NUMBERS
well i am trying to beat printer limitations for very fine detailed flat panel model part , i need to make a flat panel with distinct uniform lines of around 0,22mm thickness
so i made a triangle calculated magic number values for x and z to make uniform 0,2mm layers slanted a little bit, but i didn't get enough line separation and the part salmonskined like crazy so i started to undercut each line
i ended up with layers of 2 and 3 steps on the z axis and you would think a printer would interpretate it to just stay at this level and just make paralell lines, some more sticking out some recesed, but instead i got some wierd repeating patterns
they are very pretty but they don't look anything like a grill i wanted
i somehow get a checkerboard pattern with 0,2x0,5mm fields crossed with salmon skin lines that either connect 2 odd layers together or show the pattern i wanted to print i could send you a photo but youtbe don't allow for posting links
how can i get from clasic ender 3 consistent 0,2mm high shutters , i don't need much just a small panel to cut out my grill shape but i only get regular wierd patterns
I loaded this up on my ender3s1 with sonic pad. I was running at 160mm/s with 5000 on acceleration and getting good prints at much faster speeds. I dropped to 120mm/s but my benchy pilled up in a few layers. First time thats ever happened. any thoughts?
I was trying out your 0.2 fast profile on Cura 5.2.1. Seems to work okay so far. A couple of issues though. I forgot that importing the profile overwrites the previous machine settings. So I lost my start up and end gcode for my auto bed level CR Touch. Luckily I had Cura 5.1 installed as well so I was able to copy the settings.
One other thing I noticed was the model is printing to the front and left and not in the center. I had previously printed a calibration cube before using your profile which did print centered. Cura shows it being centered, but it does not print centered. I did not see any settings in your profile that could cause this though. Any ideas? Oh, I just reviewed your video again. Apparently, it is printing like that because it was printed on a smaller bed than my ender 3 pro. I will adjust the bed size and try again.
I'm using a Creality Ender 3 S1 Pro and up to Cura 5.2.2 I could change the nozzle size from 0.1 up to 1.0mm. Not so in Cura 5.3.0 as it actually assigned a nozzle size of 0.4mm which I cannot seem to change. Maybe you know how 🤔
Thanx Chuck!. I'm definitely, going to try this profile, as my goto nozzle size has always been 0.6mm. I found that the 0.8mm prints fast, but swallows alot of filament.
Chuck your profile works amazingly well. I reduced my test print from 3hrs to 1hr with not much resolution loss. Its a practical cable coiler print, so resolution is not really required. Was printed on my Creality CR-10s Pro. Thanx again. 👏
Nice one, thank you. Any info for the tool you used to screw/unscrew the nozzle?
I got it on Amazon a while ago but it’s no longer available. I put a link to another one I use in the description and I’ll post it here.
Nozzle Removal Tool:
Palm Ratchet: amzn.to/3qPs3pB
1/4'' Socket: amzn.to/2OjdHdg
Very interesting, So maybe I don't understand but can I use the 0.4 profile with a Ulitmaker?
As always, great job! I was trying to play with the profile, but muy Cura AppImage won't open the 3mf file as a project. No matter the config in preferences where it says "Always ask" when opening project file. It just opens the model. But tried with other profiles like the tpu one, and it did open as project. I don't know if it something else wrong on my preferences.!
Thank you for sharing all your experience!
The profile is FANTASTIC! I have a bunch of little shelves to print and it's now taking about 1/4 of the time! Thank you so much! My only question is how can I change it so it's not printing in the corner of my bed? I'm using an Ender 3 and for the shelves I'm doing now, it's fine, but I really want to use this profile on larger prints! Thank you so much!!
Change to an Ender 3 Pro profile in Cura and the Extra Fast profile should appear.
@@FilamentFriday Thank you so much! I’m good to go! This is seriously a life saver.
Sir, When I open the 3mf file, it just opens the model and the profile is not changed and when I go to the list of profiles the is no 0,6 profile. I just downloaded it on 10/11/22. Any ideas? please. Thanks.