Amazing video again !! Keep up the top work Allen . I wish there were more channels like yours! I find as a young relatively inexperienced gas engineer that I love to learn more about our trade but finding good information I can learn from is the hardest part . Thanks for the effort and to let you know your hard work is appreciated . Cheers
The logic gasvalve is none adjustable. If the reading at out clean the fan gas injector. Starting to fine injector is choked causing noisy ignition high ppm reading .Easy repair .Great channel
Good video once again.could you please ask mr ideal what brand is his tool box as I’m looking for one at the moment and that seems like a good size with organiser pockets.thanks
Ten thumbs down? I don't understand that. My question is, the excellent Ideal engineer told us how to test the gas valves on resistance, the first two gas valve readings were in kilo ohm's and the third in ohm's. Was this a mistake? Love your videos Allen,
Hi Allen great video, just a quick question, on the last reading of 23.92 DC, what reading would you expect to see if the valve was actually faulty.? Big thanks.
Good evening, do the two solenoids V1 and V2 have the same function? Why is the resistance measurement of the two solenoids V1 and V2 different? Thank you.
Hi Baffo, One is the main solenoid and the other is a safety solenoid. The reason the resistance is different is due to the spring pressure they need to over come to open.
One thing in my area is they are fitting a new smaller gas feed pipe on the road from the large mains pipe to a smaller diameter yellow pipe, thus reducing the flow !
Thanks to the ideal engineer as always very informative Allan can we see if we can get some Worcester or vaillent engineers doing the same would be great 🎂🍰🍰🍰🎂
I've currently got an issue at the moment with an ideal logic not lighting I've got the 2015 240 volt version K ohms I have 9.18 though the harness and the valve. When connected to the PCB and dad I have 9.3 which is within spec . The voltage that is being supplied is 147 volts AC but it's spiking it's not a continuous supply ? Till I took two ideal in the morning I'm not 100% but I'm thinking more it's PCB than has valve
Hi Allen, can you please make a video on adjusting Worcester Bosch gas valve which for god’s sake nobody knows why they go out of tune and crazy reading comes up on analyser 😫😫
I spend many hours putting these videos together all for free. No adds would mean no Videos unfortunately. I have done hundreds of video with no adds on them. Thanks for the feedback though.
@@AllenHart999 no offence or criticism intended, you do a fantastic job that is appreciated by one and all, I didn’t know if TH-cam puts the ads on themselves, without your say so, but I do find them interrupting at an important moment
we value your content keep up the great work check out th-cam.com/video/FEIDI5IcWPk/w-d-xo.html if you want to see more from our series love your work alan #boiler #repairs
![TEEDEE TADA - DIAMOND NARAKORN X LEGO LYKN [Special Dance Performance]](http://i.ytimg.com/vi/QgtZedFeumA/mqdefault.jpg)
Please send me your videos WhatsApp 07725 692699 Thanks
Seen this video when it came out but didn't comment but reviewing it again its probably the best video on gas valves I've seen.
Being sent to the managing director house tomorrow with this fault and I feel prepared now. Really appreciate the informative video.
Cheers Allen. Not just good for the trainees, good for the one man bands who have a bit of knowledge all over to upskill in diagnostics. Thank you.
Very true
Amazing video again !! Keep up the top work Allen . I wish there were more channels like yours! I find as a young relatively inexperienced gas engineer that I love to learn more about our trade but finding good information I can learn from is the hardest part . Thanks for the effort and to let you know your hard work is appreciated . Cheers
Another great video, perfect pace and the tests explained well, really benefit from your videos.
Thanks.
This channel 👌🏼👌🏼 cheers Alan all the other engineers who take the time out to help us learn
You are welcome, please like, comment and share😂 if you have any tips send them in. WhatsApp 07725 692699 Thanks
Another great vid. I’ve found these really useful in my first 3 years into the industry, keep em coming 👍
Glad you like them!
Past my ACS in June the videos you do are amazing please keep them coming thank you very much x
Thanks very much for your comment, please consider subscribing to support the channel 🙂
Big tanx to ideal engineer and yourself Allen great video👍
Glad you enjoyed it
Allen , can’t see any issue to dislike this video, you are amazing bro
great video , nice to see manufactures getting involved & well done to all who help send in their video's 👍
This is an ideal engineer, Not ideal themselves but it would be good to get them involved. Thanks.
The logic gasvalve is none adjustable. If the reading at out clean the fan gas injector. Starting to fine injector is choked causing noisy ignition high ppm reading .Easy repair .Great channel
Thanks.
Great video. Thanks Alan and co' .
Keep up the good work and merry Christmas.
Lee.
Thanks.
Good video once again.could you please ask mr ideal what brand is his tool box as I’m looking for one at the moment and that seems like a good size with organiser pockets.thanks
Ten thumbs down? I don't understand that. My question is, the excellent Ideal engineer told us how to test the gas valves on resistance, the first two gas valve readings were in kilo ohm's and the third in ohm's. Was this a mistake? Love your videos Allen,
No not a mistake, the first 2 valves were 240 volts and the last was 24v DC and therefore it has a smaller resistance measurement. 👍
@@kevincranfield5235 thank you Kevin
Great movie. Great tutorial. I hope will be more of that soon
I hope so too
Merry Christmas
Great video learned a lot of just one video cheers lads
Thanks for watching
really informative video, keep them coming.
Thank You
Great video. Clear and concise information.
He did an amazing video. Thanks.
Hi Allen great video,
just a quick question, on the last reading of 23.92 DC, what reading would you expect to see if the valve was actually faulty.?
Big thanks.
Fantastic video thankyou
Love the electronics side to diagnosing boiler faults
Glad you enjoyed it
Good evening, do the two solenoids V1 and V2 have the same function?
Why is the resistance measurement of the two solenoids V1 and V2 different?
Thank you.
Hi Baffo, One is the main solenoid and the other is a safety solenoid. The reason the resistance is different is due to the spring pressure they need to over come to open.
@@AllenHart999 Thanks
Loads of value in these videos. Can anyone recommend the best analyser kit to buy?
Personally i have a Kane 456 but looking at getting a Testo next. Thanks.
Kane for me quality gear.
Very good and interesting video thanks Allan appreciate it.
Thanks for watching
One thing in my area is they are fitting a new smaller gas feed pipe on the road from the large mains pipe to a smaller diameter yellow pipe, thus reducing the flow !
Great video, thanks for information. Very helpful.👍
Thankyou Mr Ideal for taking the time. :-)
Amazing effort from the ideal engineer. Thanks for watching.
Really good video thanks
Glad you enjoyed it
Thanks very much for your comment, please consider subscribing to support the channel 🙂
Thank you , great video 👌
Keep them coming
Thanks, will do!
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@@AllenHart999 already subscribed dude 👌
Great video useful information thanks for your help
Absolutely supper. Thank you
Thank You
Great video very helpful
Glad to hear it!
This helped me alot
Thank You
This is a brilliant video
Always top videos Happy new year Allen
another top video many thanks
Thanks.
Hope your well Alan 👍
I am all good, Hope you are well 👍Thanks.
Thanks for the videos, merry xmas
Thanks for watching and supporting this channel.
great video, lots of info, thank you!
Thanks to the ideal engineer as always very informative
Allan can we see if we can get some Worcester or vaillent engineers doing the same would be great
🎂🍰🍰🍰🎂
Worcester engineers cant as after working on greenstars they have had all fingers removed 🤣
Would be amazing if that could happen. I will try.
😂😂😂😂😂@@jamboSAFC
Vary Vary good fantastic video
Regards
Faruk
Many thanks
Spot on, great video!
He really did do an amazing video. Thanks for watching.
Hi, Friends,I'm interested in your testing kit. How much is it?
Great info
An other great video. Thanks. Really helpful.
Glad you enjoyed it!
Is ideal gas valve user adjustable ?
Wonderful Allen 👍👍👍
Many thanks!
Excellent explanation 👌
Glad you liked it
I've currently got an issue at the moment with an ideal logic not lighting
I've got the 2015 240 volt version
K ohms I have 9.18 though the harness and the valve.
When connected to the PCB and dad I have 9.3 which is within spec .
The voltage that is being supplied is 147 volts AC but it's spiking it's not a continuous supply ?
Till I took two ideal in the morning I'm not 100% but I'm thinking more it's PCB than has valve
Fluctuating voltage PCB
Very good
Great one
👍👍👍👍👍
Interesting video
Great
Brilliant video 👍
Glad you enjoyed it
excellent
Hi Allen, can you please make a video on adjusting Worcester Bosch gas valve which for god’s sake nobody knows why they go out of tune and crazy reading comes up on analyser 😫😫
Make sure you fully strip and service the boiler before you adjust the gas valve
@@AllenHart999 yes and please don’t forget to remind me to switch off the boiler and open the case cover before start to service it!!!!
I’m 60 but every day is a school day picked up a little tip there. Miss working with other engineers and bouncing ideas off each other.
Hi Timmy. Feel free to send us some tips in if you get chance. Thanks so much
Brilliant
Excellent video ... really informative 👍
Glad you liked it
have you got a link to buy that expansion vessel pressure checker?
It’s just a tyre pressure checker, Halfords or amazon will have one, I can’t remember exactly where I got it.
I need to buy one as well. Looks good. Thanks.
Watched. Gas valve. Gas valve solenoid
👍👍👍
Thanks very much for your comment, please consider subscribing to support the channel 🙂
When you did first test and gas valve opened because pressure drops that mean power is going to valve it coil only opens with voltage
Sure but if it didn’t open then you would check the voltage etc
isnt the original one dc as in the tech book for the pre 2015 model
They only went to 24v a couple of years ago.
The earlier model does state DC too but higher voltage 215vdc in the fault finding chart
Just don't buy a ideal fullstop.
Si può avere la traduzione in italiano?
Very good video, but an unusual amount of annoying adverts though
I spend many hours putting these videos together all for free. No adds would mean no Videos unfortunately. I have done hundreds of video with no adds on them. Thanks for the feedback though.
@@AllenHart999 no offence or criticism intended, you do a fantastic job that is appreciated by one and all, I didn’t know if TH-cam puts the ads on themselves, without your say so, but I do find them interrupting at an important moment
Great video. This is why I stick to baxi 😂😂
Why? both gas valves in Baxi and Ideal are made by Honeywell????
Please don’t talk while the boiler is running.
Difficult to hear what’s being said
we value your content keep up the great work check out th-cam.com/video/FEIDI5IcWPk/w-d-xo.html if you want to see more from our series love your work alan #boiler #repairs