Very informative and helpful video... specially the spark electrodes tester...thanks for taking out time and making videos which help everyone out there including me.
Been watching your videos, even the old ones, very helpful!! Do you have a link for the spark electrode tester also is it universal and can use in most boilers?
@@cputilitysolutions Hi,it heated up fine had a bath and shower then after two or so hours went back to FL code again. It's getting a good spark as I checked with elec tester like yours,I also removed and cleaned probs, condenser trap. The flow goes through the roof straight up and is capped to stop any debris from getting in. Gas cooker has good supply of Gas. Is there anything else to check, I'm at a loss many thanks?
The FL code is quite a generic code and could mean a number of things. It may need stripping back to inspect the burner too. Could also be a sticking gas valve
@@cputilitysolutions local engineer checked boiler today and thought the generator was at fault but after checking old one witch was dead and refitting new one it "sparked" into life... Must have been a dirty connection, anyway thanks for all your help!!! New sub.
Hello I have qwestion if boiler working great to heat water in bath. But working only 1 min on radiotor and stops and show error L F. What's can be? Is was clean thermostat was change sensor with can see then boiler is burning.
They spark plug testers think come in pack of 4 you will need them keep breaking on me. On vals usually and not always accurate. Had one good spark lit boiler didn't stay on ended up being lead. Lead needs about 1kohm resistance
Very informative and helpful video... specially the spark electrodes tester...thanks for taking out time and making videos which help everyone out there including me.
Glad you found it helpful 👍🏽
Watch your videos they are usually spot on ....love the magnetic arm band must get one !
Glad you like them!
Thanks great video. Work on alot of these. Ordered a spark plug tester to help me out. 👍
Nice one!
Okay got now the spark tester from eBay
Thanks
Nice and very informative video. Thanks
Top man. Great job 👏🏻
Another great video. Thank you
Great professional job, I like your magnetic wrist band 😉
Could you please tell me where did you get the spark tester ,
Thanks
Been watching your videos, even the old ones, very helpful!! Do you have a link for the spark electrode tester also is it universal and can use in most boilers?
You saved my boiler thanks so much ❤️
Thank you! Hope you subscribed! 😉
@@cputilitysolutions Hi,it heated up fine had a bath and shower then after two or so hours went back to FL code again.
It's getting a good spark as I checked with elec tester like yours,I also removed and cleaned probs, condenser trap.
The flow goes through the roof straight up and is capped to stop any debris from getting in.
Gas cooker has good supply of Gas.
Is there anything else to check, I'm at a loss many thanks?
The FL code is quite a generic code and could mean a number of things. It may need stripping back to inspect the burner too. Could also be a sticking gas valve
@@cputilitysolutions Removed fan and cleaned burner still no joy,
How do you unstick the gas valve ?
@@cputilitysolutions local engineer checked boiler today and thought the generator was at fault but after checking old one witch was dead and refitting new one it "sparked" into life...
Must have been a dirty connection, anyway thanks for all your help!!!
New sub.
Good job pal 👍😎
cool video, not a bad breakdown call at all :)
0:08 do the ideal icos go into service mode, max and min fire?
No, you just adjust it via the potentiometer
Another good video
Ideal isar 30he is showing c and d alternatively at will without any demand
Hello I have qwestion if boiler working great to heat water in bath. But working only 1 min on radiotor and stops and show error L F. What's can be?
Is was clean thermostat was change sensor with can see then boiler is burning.
You are very good
Nice work 💪
Thanks man 👍🏽
They spark plug testers think come in pack of 4 you will need them keep breaking on me. On vals usually and not always accurate. Had one good spark lit boiler didn't stay on ended up being lead. Lead needs about 1kohm resistance
Nice one
good vid
Dreadful boilers... thanks for your efforts
Absolutely - most of the ones I come across now have split main heat exchangers!