For the axel sliders, do they just slide in or is there something you need to remove first? You video made me feel so much more comfortable about doing this myself. T Rex looks like a great kit that is more round and may not cause more damage if the bike should fall and slide.
EastPhilly axel sliders just slide right thro and thread into the connecting bar. Glad I could help with the video any other questions just ask. Like I said in the video I absolutely love tree frame sliders and will continue to use them on any bike I get the mounts are sturdy and the plastic pucks are very high quality and replaceable
I just installed mine... You and T-Rex have the two bolts for the main sliders mixed up... You say to use the MXx100 on the left side and the 110 on right... that is reversed. The 110 bottoms out on the right side with about a quarter inch that will no go in... You have to use the 110 on the left and the 100 on the right.
I noticed their written instructions do not match up with the hardware they provided too... not only with the two main frame sliders but also with the case protectors too... And the axle sliders did not match up with instructions either... and the rear right puck on the rear axle slider was not designed properly... when I tightened it on to the screw... the set screw was buried beyond reach into the chain adjuster on the right side. I just had to tighten it as good as [possible without tightening the set screw on that one.
Yeah... on the left side if your bike is on the kick stand oil will leak out of the bottom holes. I started to do it and when the oil started coming out I put that screw back in and put my bike on a stand so it would be level... no more oil that way.
For the axel sliders, do they just slide in or is there something you need to remove first? You video made me feel so much more comfortable about doing this myself. T Rex looks like a great kit that is more round and may not cause more damage if the bike should fall and slide.
EastPhilly axel sliders just slide right thro and thread into the connecting bar. Glad I could help with the video any other questions just ask. Like I said in the video I absolutely love tree frame sliders and will continue to use them on any bike I get the mounts are sturdy and the plastic pucks are very high quality and replaceable
I just installed mine... You and T-Rex have the two bolts for the main sliders mixed up... You say to use the MXx100 on the left side and the 110 on right... that is reversed. The 110 bottoms out on the right side with about a quarter inch that will no go in... You have to use the 110 on the left and the 100 on the right.
Hey, where did you find in the manual that it says the engine takes 8ft/lbs of torque?
binaryfuzion wasn't in the owners manual found it in a shop manual off line
I noticed their written instructions do not match up with the hardware they provided too... not only with the two main frame sliders but also with the case protectors too... And the axle sliders did not match up with instructions either... and the rear right puck on the rear axle slider was not designed properly... when I tightened it on to the screw... the set screw was buried beyond reach into the chain adjuster on the right side. I just had to tighten it as good as [possible without tightening the set screw on that one.
I read somewhere that when the bolts are removed to install the lower engine covers, oil will leak from the engine. Is that correct?Thanks.
Moe Cherradi sometimes on the side the bike is leaning but it's very minimal nothing to be concerned about
Yeah... on the left side if your bike is on the kick stand oil will leak out of the bottom holes. I started to do it and when the oil started coming out I put that screw back in and put my bike on a stand so it would be level... no more oil that way.
Do you have a link for this spool and slider kit?
sure do man this is for the full kit but you can buy them separately if neededt-rex-racing.com/catalog.php?item=625
thanks
+Joe Gray no problem anymore questions let me know