Thank you so much for the "just wiggle it out of there" part. Hell if every other video didn't just skip of how they got it out, could have sworn it was glued in there.
Good video! But how can I know wich cable is the running light? And wich one is the positive and negative?? I don’t have the socket connector that comes from the original turn signal so I don’t know how to deal with the 2 wires and the socket
So I tried to replace mine yesterday and I ended up losing my headlight and tail light. They were working and I just lost power to both. Any idea what happened?
@@speedclutchlean3460 I gave up on it. I'm pretty sure it has to be a three wire for the front ones. I saw some thing on TH-cam where they were adding diodes and things but I'm not that electronically inclined LOLI just put the stock ones in front the back aftermarket led ones work perfect.!
Carlos Monce Records because this same method can be used on just about any bike just plastic removal is different and the r6 year range for the plastics is wide
Thanks a ton boys recently was in an accident and fortunately the headlights and turn signal are the only real damage, thanks again!
Thank you so much for the "just wiggle it out of there" part. Hell if every other video didn't just skip of how they got it out, could have sworn it was glued in there.
ShakexJunt glad I could help try to make sure we cover what other people don't and more question just let me nnow
I think I got her all wrapped up, thanks again!
ShakexJunt not a problem glad I could help
those pumpkins probably hit your dome in the outro
Bad ass out tro too
I Have a 07 R6 is it the same signal sw as the 08 ? Can some one Tell Me?
Good video! But how can I know wich cable is the running light? And wich one is the positive and negative?? I don’t have the socket connector that comes from the original turn signal so I don’t know how to deal with the 2 wires and the socket
Diego Granda ground is usually black and positive I believe is green
So I tried to replace mine yesterday and I ended up losing my headlight and tail light. They were working and I just lost power to both. Any idea what happened?
Can you help me find a subframe for a 2005 R6
watching this clip made think twice about replacing the signal myself
Same here
I just hate manual labor lolz
Do the light stay on when u riding???
mine will only blink if my fingers are touching the wires as soon as I remove my fingers they stop working. Not sure what to do.
Bricklinsv1970 make sure you have a good connection between wires
@@speedclutchlean3460 its good as soon as my finger are not touching them they stop.
What kind of connector did you use
@@speedclutchlean3460 I gave up on it. I'm pretty sure it has to be a three wire for the front ones. I saw some thing on TH-cam where they were adding diodes and things but I'm not that electronically inclined LOLI just put the stock ones in front the back aftermarket led ones work perfect.!
What happens when u use the after market plug? Will they still work the same way as urs?
Yung Philipine yea it should as long as the wires line up the same
Why no one ever says the year.....??? What year bike is this.. I have a 2016
Carlos Monce Records because this same method can be used on just about any bike just plastic removal is different and the r6 year range for the plastics is wide
7:19
Did you have to add a relay ?
OVO J if you want your flashers to flash slow then yes but if you're not worried about it then no
You do too much job that’s easy to change you don’t need to do the whole thing
You made a mistake in the title; signal* :P But good video :P
+Tyson thanks I fixed it now
SpeedClutchLean You are welcome ^^
But connectors, slap!