Yamaha FZ/MT07 MUST Have Mods + Mods I Still Want
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- Most of these links listed are affiliate links meaning I will get a small kickback if you decide to buy something from these links. Thanks for watching and I appreciate the support as always!
FZ/MT07 Fender Eliminator - ebay.to/2WIScpM
CR High Bend handlebar - amzn.to/35Pzl0x
Protaper Pillowtop grips - amzn.to/2zq23sB
CRG Blind Sight Mirror - amzn.to/3dzH714
FZ/MT07 Yoshimura Exhaust - amzn.to/2zq1OOd
FZ/MT07 K&N Air Filter - amzn.to/35T0fok
ColorCluster display - colorclusterz....
FZ/MT07 Windscreen - amzn.to/35RCexH
FZ/MT Led Headlight - amzn.to/3fJZF0G
FZ/MT07 Intergrated tail light - amzn.to/2SW4XvX
FZ/MT07 Footpegs ( Not the exact ones on my bike) - amzn.to/2YYxKE3
Social Media
Instagram @Shake_N_Blake509
Facebook
/ shakenblake509
My Gear
GoPro Hero 5 Black: amzn.to/2JQC5CK
GoPro ND Filters: amzn.to/2ENqwYF
Sony ECM-CS3: amzn.to/2cY7qRf
Speed and Strength SS2500: amzn.to/2dcuV8q
AGV K3: amzn.to/2dcwJyb
Fox Dirtpaw: amzn.to/2d01071
Speed and Strength Gloves: amzn.to/2cEvw7f
Klim Glove Liners: amzn.to/2cM1jAB
Ogio Backpack: amzn.to/2cM0Hec
I LIKE THAT CINEMATIC INTRO and the music
so much I got harder than a R1M seat
These are great mod-able bikes! I've done the following to mine...
MT-07 ABS Grey
Controls:
- Genuine Yamaha levers (Gilles Tooling)
- Genuine Yamaha heated grips
- Yamaha R6 throttle tube (1/6 turn)
- Techspec C3 tank grips
- MT-10 foot pegs
- Hero blob blanking plugs
Lighting:
- Philips Racing Vision H4 +150%
- Philips Xtreme Vision w5w LED (4k)
- Genuine Yamaha LED blinkers
- Blinker relay for LEDs
Looks:
- Genuine Yamaha fly screen (smoked)
- Genuine Yamaha bellypan
- K-Maxx Typ2 bar-end mirrors & bar-ends
- Mirror stalk blanking plugs
- Evotech tail tidy
- MT07 6x4 private plate
- MT logo rear brake-fluid sock
Protection:
- Evotech radiator guard
- Pyramid-Plastics rear hugger (colour matched)
Performance:
- Akrapovic titanium exhaust (decat, minimal baffle plate, o2 sensor delete)
- DNA air filter
- DNA stage 2 airbox lid
- S-TEC custom remap
- 80bhp, 55lbft, +5hp midrange gain
- Sigma slipper clutch
Braking:
- Brembo SA/SP sintered brake pads
- HEL brake lines (7 line kit)
Suspension:
- Maxton rear shock
- Maxton fork cartridge kit
Utility:
- Genuine Yamaha chain adjusters (Gilles Tooling)
- Ventura Estoril removable tail bag
Dude do you have Instagram when I can check these mods on picture?
@@michalpetras5199 not as many bike photos as I should have, but there are some... instagram.com/lordgibbness
Rob Thorpe awesome bike man and your page is awesome bro nice pictures be safe two wheeled brother take care
Checked ur Instagram and love ur bike! The grey and black combo with the mods are awesome! If u are planning on selling it at some point whether it’s it’s in a year or 2 please let me know as I’ll be interested! :)
@@danielwaller6276 haha I'll let you know... I am actually looking to buy a speed triple 1200 this year, but I think I'm gonna keep the mt07 as it's such a fun bike to just jump on and blatt around town etc!
One of the most informative MT07 TH-cam channels out there!
ThAnks brotha 🤘
like from Brazil MT07 = FZ07 in USA
Love the intro but don't make it too long on every video !
You mean the music video? 😁
Exactly it makes me now want to watch these vidoes
See the Project Farm video about air filters. See the Dave Moss videos about the MT/FZ-07 front forks and back shock. A quick improvement for a K&N oiled cotton air filter is adding a K&N oiled foam prefilter on top of it- it filters a lot more dust and is much easier to clean.
Highly recommend the OEM R6 throttle tube (not motion pro tube). Super cheap and easy mod that makes a fun bike even "funner"! 😉👌
I got it makes puts the beast into a frenzy state ahahah power wheelies easy o 2nd with it too easy
What’s wrong with the motion pro one? Did you have fitment issues? I got it for my xsr700 and it wouldn’t fit.
wassat
keep toggling back from r6 to mt07... used to have an 2001 r6, but now the seat is much higher.. this vid sold me... plus your house is huge
Intro was fantastic, overview was great, and can't wait to see more man!
Alex Pullen thank you very much
The first mod I made to my FZ-07 were steel-braided brake lines. Night and day difference!
timsmotorcyclediary definitely on my to do list for the bike
I enjoyed the view and found myself tapping to the music finding my own sound woth it
I got the Yamaha official flyscreen, Akrapovic titanium system and R&G tail-tidy (aka fender eleminator) for my '18 MT-07. Understated mods, just gives the bike cleaner lines when you look at it and sounds much better.
MT07 is such a fun bike :D
Time for a hordpower intake and hordpower tune hell of a difference
I just sold my fz a couple weeks ago for a bigger bike and now this is making me wish I never got rid of it😭
You rock, the links are appreciated.
Loved the intro man 🤙
initro was damn good man :D
Beautiful bike I have one myself I crashed it last year gonna rebuild it black an gold now excited as heck
liked for the intro before you spoke
Love the spinning chain shot with the subtle 'ShakNBlake' decal
You must loooove washing your bike lol
Sweet wheels
Like the edit, you should end every video the way you began this one. Chill music, dope spots, good vibes 🤙
Brilliant video graphics at intro. Really good video!
The peg placement is for me one of the most annoying things about the FZ 07 (which tells you a lot that something so small is the most annoying thing). I'm a shorter person and it gets in the way of where my feet reach down. Hits my leg and I have to move them either in front or behind to reach down. I'm glad there's a solution that others have figured out
Loved the video !! but I think the title of the video should be " in the description down below". 😉
Perfect Bro
Lots of love From Nepal,Kathamandu❤️
Bike looks good! I saw you on appleway and Barker the other day, I was on my trials bike 👌🏻
You need to switch out those flag decals. The stars supposed to face the front. Other than that. It’s a dope ass bike. I have a 19 MT07 myself.
I was going to mention that, never display the flag in retreat
True
TheBuel “never display the flag in retreat” 💀
@@CJizzleJ that’s the term for it. Technically speaking the stars are the directional front of the flag.
Intro was awesome!
Gotta b a record for the amount of times a YT’ber either plugged or mentioned sumthn n “the description down below” lol 🤣🤙
The best intro bro! 🔥🔥
Liked just for the intro! Nice work!
Going hard with the drone! Nice work
A brouge led round headlight would look perfect on this bike
Check the xsr900 has pretty similar, looks amazing
Awesome video brother and damnnn what a bike!!
I liked the intro Bud. The quality of your vids have always been good but they keep getting better. Still, the ripping around and wheelies make me cringe but what can a dad do.
Roger thanks dad, I’ve been working on the quality level each video. There were no wheelies in the making of this video 😂
Bro your powdered wheels are awesome 😍🤤 think I’m gonna have to have nm one done in white too. I have the exact same bike and colour
thanks for that. Cool intro well done. make sure you mod. the forks, I chopped 13mm off (I'm 73Kg) used 15W oil and I am loving the difference. Only thing is you realise how shit the std. rear shock is. My next purchase is the same rear sets you have. Thanks for the advice on the locktite :)
I love your intro bro, keep it up
Fender delete is legal in washington state, but the steep angle you have your license plate tilted COULD be considered ticket-able. of course at that point you were getting a ticket for something else anyhow lol
Of course with the fender delete, if you run with a passenger, through a light shower, they're really going to be pissed off that their back and backside looks like someone crapped a streak diarrhea on them.
A must do mod and its cheap is the R6 throttle tube.
Longest intro Ive ever seen. Dang near fell asleep, but cool shots and good drone work
What a beauty shots wow best intro ever
Thank you very much!
5 mins to install the rear tidy - I call BS! Just because I just did it on my '20 MT07. Cool though man - I watched your vid about buying one and the negative spects of the bike. I'm an older guy - I already have a '17 R1200RT that I love - just wanted something smaller to tool around on - I freaking love it. I am going to learn to do short wheelies - in parking lots.
Nice motorcycle and videos, keep going 🤟🏽
great intro!
You know someone is a law bidding citizen when they fold their license plate under the fender
Ditch the k&n and pick up a hordpower intake. It's pricey but it literally transforms the bike.
You forgot the radiator guard, grips, front turn signals.
Realy nice intro!
Just a suggestion when it comes to stationary videos, TURN OFF AUTO FOCUS! You can hear the camera adjusting and it is so distracting from what you are saying!
Taylor B ya I know. The autofocus is so loud on this lense...
What about your flush mount blinkers?
I have the same mirrors, they are TINY! I love that, but i'll probably sell them and get bigger ones.
The mods I would do is to take of the rear wheel and paint the cross beam of the swing arm with some rust proof paint such as black smooth hammerite. The bike is so prone to rust, even without riding in the rain. The next thing I will do is to see if I can find a 2018 mt-07 rear shock on eBay. My bike is a 2016 model with abs. Then do the front fork mod as recommended by Dave moss tuning. The bike is a el cheapo motorbike. I don't want to add things to it, as after I sell it. I would lose a whole bunch of money, if I upgraded to a akrapovic exhaust. Gilles rear combined swing arm spools, rear sets. I might as well have spent the money on an mt-09 or even the ugly KTM 790 Duke
Check out extreme creations front caliper brackets, they allow you to run 320mm rotors from the r1. Other then more leverage and better bite, the rotors look way cooler.
LIT angles...
ColorClusterz LCD flips looks good on it man!! Debating on switching from the protaper Carmichael bend to your bars. Thoughts?
Just by the colour of it... your brake fluid is due for a change. Looks like Pepsi in the rear brake reservoir. Half filled as well...
Most important mod for FZ07 is fix the suspension before EVERYTHING. It's terrible.
I mean i wanted to hear about upgrades not sinematic video first 2 minutes (make it a bit shorter) but keep it up pretty good
Wheels look dope - any issues with powder coating?
“Wheelie the shit out of it”
Hello! I think that is the best MT 07 i ever seen, awesome! What is this tires??
Why would you tape a full system? I'm guessing it's titanium. The color clean titanium changes is beautiful.
Ur house nd those surroundings ❤❤
Very nice drone footage from jonny b Manchester uk 👍
Bruh I got the exact same mirrors off of eBay for $15 a set. EXACT set.
What a beauty 🤤😍
Insane intro. Keep it up 🙋♂️
Nice Mods.. but if you haven’t changed you right tank flag, you need to, it’s backwards.
What about the turn signals in the front?
Awesome..was it expensive to powder- coat the wheels?
It is not bad. For both wheels it was $250.
nice intro :D
Awesome bike! I'm 187 cm tall (6'2), 85kg. Is the mt07 too small for me?
Meő Meplau People day you would be but I’ve swapped out the handle bar for a wider one and have no issues riding. I’m 6’4 btw.
im 6'3 and i love the fit
Im getting my first bike soon and want a mt 07. Why did you go from a 09 to 07?
Does the integrated tail lights fit the new 2022 MT07? Im going to get the TST one but i dont like the shape of it tbh. After seeing this, I would like to do this to mine 100%. Thats a sexy mt07 btw.
intro was good.too long though mang. just an opinion.
can tell you enjoyed making it. buttery.
Hey beautiful bike. Question that license plate bracket. Does that help cover the exposed hole right behind the tail light where the original fender was? Thanks. Been trying to find a bracket that would help cover that hole
Thanks
Hello from Portugal 🇵🇹
Are the mirrors good can you see well with them ?
This mood its a must have i will buy my first 07 this month they took to much time to came home ?
LED lights are completely necessary for the Fz-07, the stock light is way too dim.
Your flag decal is backwards. The stars always face forward on a vehicle.
Thermo tape it’s good choice for Mt07?
Do these bikes hold there value though?? Guy wants to trade for my banshee and I'm tore...i know banshee will just keep increasing while most bike decrease over the years. Lmk what you guys think. Thanks! Sweet video btw
Where did you get your from blinkers too ?
How bout the front signal light?
what are the front turning signals?
4:18 "pretty expensive" = 50$ ?!
got for my mt07 the mo.view flight mirrors. 140$ each lol
I wish you tell us where any of the links are to these mods!!!!!
Do you have a link for your front turn signals your running or have any suggestions? Also what year is your FZ?
I thought I had them linked but maybe not. Both front and rear are from TST industries.
2014 model
I need the bar end adapters where can I find those?
Did he call the rear sets pedals?
I've also seen the videos on the suspension and I've wondered about it myself it seems like it would be really good for the bike did you do it yet since this video?
i have not yet. Never bothered me enough to get the work done
@@ShakeNBlake509 Ooh ok yea it doesn't seem too critical just wondering thanks man
I'm form europe and this may sound a dumb question but why do Americans and others call the MT an FZ? They are two different bikes where the engine may be the same but the dash and the anesthetic of the two bikes is way different
fyi. you are missing a bolt on the visor if you didnt know.
you prob did but ey,
Did you have to cut the rubber housing for that LED light or did it fit fine?
What tune do you have on this bike??
Your exhaust side flag is backwards.
intro make me cry abit
I'm the description down where?