It's amazing how your instructions actually work and Meta's website has completely outdated and false information on fixing this issue. It's truly frustratingly ironic, but you saved me my man, you saved me. Thank you.
THUMB TRIGGER ISSUES - READ THIS - my boy ended up throwing his controller against the wall and the thumb trigger wouldn't work no more - SO with this vid I was able to tear it open and fix it - FOR INFO - there is a small magnet that moves closer to a sensor the more you push the thumb down, if the magnet isnt flat (which can easily be thrown out of place if you knock it) the thumb trigger doesn't go full range, I slipped in some tweezers and straightened it out flat and it now works!!!!! Great Vid.
IMPORTANT!!! PLEASE READ: If none of these things work, CHECK THE INSIDE OF THE CONTROLLER FOR CORROSION. Sometimes batteries suck, especially if they're cheap. In my case, I hadn't used my headset for a few months and the controllers sat unused. So when I changed the batteries, I thought my right controller was broken because it was still dead. If there's corrosion on the silver button(s) where the batteries connect, the battery will not make contact, even if it's brand new. If the button looks "rusty" or feels rough, it's got corrosion on it. Whatever you do, DO NOT use household cleaners, soap, or caustic chemicals on it. Get a Q-tip, put a little alcohol on it (I cut mine with water), and clean the connection area until it's smooth, bright and shiny. If it doesn't work at first, un-pair and re-pair the controller again. BTW, if this was the problem and you don't think you'll be using your headset for awhile, it's a good idea to remove the batteries from the controllers until you're ready to play again to keep this from happening. No batteries = no corrosion. 🙂
This was super helpful. I was in a chat with Meta for about 40 minutes when I found this video and got it working in just a few seconds. Unbelievable how I spend $600 and have to go to TH-cam to solve a problem. Thanks so much 👍
If I were to skip the step where you turn off the headset completely at 3:15, would that stop this fix from working? I am asking, because I am just about to send back a Quest Pro where the right controller cannot be made to pair with the headset at all. I have tried all sorts of fixes, unpaired the controller (not turned off the headset) and tried re-pairing it. I managed to do this with the left controller, but not with the right controller, which continues to be defective... They are charged of course, and the controller does enter pairing mode (leds flash differently, and there is a slight vibration after 4 seconds when pressing the two buttons). Still, the thing refuses to work properly.
Buddy for 3 weeks iv had issues with controller jumping about drifting I seen your video 3 weeks ago and I skipped the bit with the battery loose inside the controller and add paper because I thought that's silly guess what I went through my usual blow on controller sticks to see if it would stop drifting and moving and shaking controller and then heard the battery move about , it was the loose battery all this time lol that's wat I get for skipping that part of your video because it sounded silly lol
I just replaced my thumbstick by opening the controller and when I tried it out the light started blinking and then when i tried to pair it the app said i needed an update but my quest 3 said failed to update
I was having issues with one of mine, come to find out the connection to the battery was corroded! Not sure how only used it a few times. Hope this helps anyone!
Not unless Meta fixed that catastrophic oversight recently. I hated on the Meta tech support people for not making it possible to pair the headset and controllers using a plain old computer. Especially since my headset wouldn't pair with my iPhone when I factory reset it. They suggested I buy a new phone. The Quest is an Android device and it required an Android phone to fix it. Fortunately, I had a cheap Kindle fire tablet ($40) lying around, and after two months of haggling with Meta, it set up right away with the Meta app on the Kindle Fire.
A piece of electrical tape on the inside underneath the battery works a lot better and you don’t have to worry about toilet paper. You just wanna maintain that snug fit because I had a problem with my quest 2, Plus you don’t have to keep fitting the toilet paper around it if you use electrical tape just a tiny piece and you’re good.
This is about the batteries in the controllers, not the headset. If you are using rechargeable AA batteries in the controllers and have this issue just remove them for 5 minutes and then put them in again.
For some reason i was doing something and when i came back my controllers (both) they were not working and they were full battery but i used a different battery
My Meta Quest three is not working. Can you make a tutorial of how to fix it like it keeps saying stuff like Meta Quest three servers. Keep stopping social platform keeps stopping and everything is turning black and my controller are not working when I’m in the main menu in. My VR is not connecting to the Internet please help.
For some reason I can't access the headset settings and it is saying it isnt connected, i have had the headset for 6 months and i have had no problems with it until now
@@thomassurbellajr3840 take the battery’s out of the controllers and leave them out for like 3 hours and then put them back in. That’s what worked for me
My controller won’t work, (my right one) eg. Whenever I play gorilla tag people say it’s there but I can’t control it. If I do see it it’s in front of me but not tracking my controller, it just sits there. Does anyone know how to fix it?
1: They prolly have rechargeable batteries. Change the batteries, and put good quality non rechargeable in them like Energizer or Duracell AA batteries. I don't recommend rechargeable batteries for these controllers unfortunately. 2: Go to the Q3 menu using your hands, go to Devices, and then Quest Controllers. Repair them. Follow the tutorial. They will work again 100% sure.
@Seagull-- sadly no and my meta quest has been sitting unused :< all I know it flashes white the buttons work but it won't track the movements what so ever
I have one problem with my quest 3 right controller. In first hour of gaming all is ok but after one hour. When i put my thumb on side sensor panel(this is the angle close to B and A buttons) and on trigger, and than remove all my fingers for wave my hand, its opening like 3 seconds. I recognized it in VRChat. Who know how to fix it?
Bro my dad was so mad at me that when he saw that it was working he said he did it and that I was to dum for it 💀, but thank you for the help I really appreciate it
Brother please help me out i got this shit yesterday and my meta quest button is unresponsive like my g tf can i do i can’t even open any app on the meta quest. i take the battery out and it shows there’s still life. like bffr i just got this headset. i’ve used it twice. this is the second time. like at this point god hates me because it’s every fucking electronic i touch explodes.
I pressed the volume down button and the power button and held them down until it got me to the factory reset screen. Try factory reset or boot. If that doesn’t work you may need to trade it in for another one asap. I got mine from Walmart and was able to swap it for a new one. I had the 3s and ended up just getting the 3. Now that I got one that works I love it
When I try to pair my pro controller it doesn't vibrate 10 seconds later a green light starts blinking another 10 seconds later a dark blue light shines😊
It's amazing how your instructions actually work and Meta's website has completely outdated and false information on fixing this issue. It's truly frustratingly ironic, but you saved me my man, you saved me. Thank you.
Same thing here!!thank you
THUMB TRIGGER ISSUES - READ THIS - my boy ended up throwing his controller against the wall and the thumb trigger wouldn't work no more - SO with this vid I was able to tear it open and fix it - FOR INFO - there is a small magnet that moves closer to a sensor the more you push the thumb down, if the magnet isnt flat (which can easily be thrown out of place if you knock it) the thumb trigger doesn't go full range, I slipped in some tweezers and straightened it out flat and it now works!!!!! Great Vid.
sometimes, us kids need to control our anger 🤷♂️
@@ThatzOfcSeangorilla tag is getting realistic that’s why
IMPORTANT!!! PLEASE READ: If none of these things work, CHECK THE INSIDE OF THE CONTROLLER FOR CORROSION. Sometimes batteries suck, especially if they're cheap. In my case, I hadn't used my headset for a few months and the controllers sat unused. So when I changed the batteries, I thought my right controller was broken because it was still dead. If there's corrosion on the silver button(s) where the batteries connect, the battery will not make contact, even if it's brand new. If the button looks "rusty" or feels rough, it's got corrosion on it. Whatever you do, DO NOT use household cleaners, soap, or caustic chemicals on it. Get a Q-tip, put a little alcohol on it (I cut mine with water), and clean the connection area until it's smooth, bright and shiny. If it doesn't work at first, un-pair and re-pair the controller again.
BTW, if this was the problem and you don't think you'll be using your headset for awhile, it's a good idea to remove the batteries from the controllers until you're ready to play again to keep this from happening. No batteries = no corrosion. 🙂
i cant
You are amazing
This was super helpful. I was in a chat with Meta for about 40 minutes when I found this video and got it working in just a few seconds.
Unbelievable how I spend $600 and have to go to TH-cam to solve a problem.
Thanks so much 👍
THANK YOU BRO MY PARENTS WERE YELLING AT ME FOR BREAKING NY CONTROLLERS❤️
Same omg
ME TOO
Yup I did the same thing to my daughter
@@valley14baybro look at ur videos ur like 6
@@blaze_12106-jmaybe the daughter uses his account?
I cant do this on my new headset bc i dont have a acc yet bc it is stuck on the pairing page pleas help
Love how I watch this video as my controllers finally connect after the software update or whatever it was
OMG 😭THANK YOU SO MUCH I WAS ABOUT TO CRY ILY
Theres no need to cry. Its just the headset becoming a dumbass
If I were to skip the step where you turn off the headset completely at 3:15, would that stop this fix from working? I am asking, because I am just about to send back a Quest Pro where the right controller cannot be made to pair with the headset at all. I have tried all sorts of fixes, unpaired the controller (not turned off the headset) and tried re-pairing it. I managed to do this with the left controller, but not with the right controller, which continues to be defective...
They are charged of course, and the controller does enter pairing mode (leds flash differently, and there is a slight vibration after 4 seconds when pressing the two buttons). Still, the thing refuses to work properly.
Buddy for 3 weeks iv had issues with controller jumping about drifting I seen your video 3 weeks ago and I skipped the bit with the battery loose inside the controller and add paper because I thought that's silly guess what I went through my usual blow on controller sticks to see if it would stop drifting and moving and shaking controller and then heard the battery move about , it was the loose battery all this time lol that's wat I get for skipping that part of your video because it sounded silly lol
Thank you so much dude this helped me A TON!❤🎉
I just replaced my thumbstick by opening the controller and when I tried it out the light started blinking and then when i tried to pair it the app said i needed an update but my quest 3 said failed to update
What do you do now that they have new format for the meta horizon
Thank you very much this helped me alot
I don’t have headset setting what do I do
W I was looking for a video that worked and didn’t expect to come across this masterpiece of a support video, Love you bro ❤
Thanks buddy. Top man 💫
Tysm for letting me know👍🏻
That actually worked! Thank you.
Dang quest three for the win thanks bro you’re the best
What do I do if the "Headset Settings" are unavailable/greyed out/ Inactive??????
Hey mine are also greyed out did you manage to find a way to fix them?
THANK YOU YOU SAVED ME JUST IN TIME
Bro your a life saver , my soul left my body for a solid 15 mins while I was doing this bro 💀
I was having issues with one of mine, come to find out the connection to the battery was corroded! Not sure how only used it a few times. Hope this helps anyone!
Thank you for this video! It definitely was helpful and spared my son from catching a whooping lol
Thank you so much my controller works now!
Is there a way to in pair and pair back without app
Not unless Meta fixed that catastrophic oversight recently. I hated on the Meta tech support people for not making it possible to pair the headset and controllers using a plain old computer. Especially since my headset wouldn't pair with my iPhone when I factory reset it. They suggested I buy a new phone. The Quest is an Android device and it required an Android phone to fix it. Fortunately, I had a cheap Kindle fire tablet ($40) lying around, and after two months of haggling with Meta, it set up right away with the Meta app on the Kindle Fire.
Thank you so much , this worked!!!
Thank you! The last tip worked for me
WORKED PERFECTLY!!! Thank you!
how do I make my controllers stop flicking around when I am playing
So I tried to pair my left, and I haven’t tried to pair the right yet, but when it says to wait for the vibration and never vibrates
Thank you very helpful. Fixed my problem
I can’t believe you his actually worked TYSM!!!
2:47 headset settings is greyed out. Now what.
Thank you so much 🙏🏽
Thank u. U saved my life ❤
HOW DO I TAKE OUTTHE BATTERY
With great bloody difficulty lol!!
Thanks bro 🎉
Thank you so much! ❤ I thought it was broken
Bro thank you so much I tougth I needed to get a new one
The last one worked like a charm
A piece of electrical tape on the inside underneath the battery works a lot better and you don’t have to worry about toilet paper. You just wanna maintain that snug fit because I had a problem with my quest 2, Plus you don’t have to keep fitting the toilet paper around it if you use electrical tape just a tiny piece and you’re good.
Woooo! Thank you! You saved me $80!
i can't replace my battary cuz i'm using the rechargeable batteries that come with the elite strap with battery
This is about the batteries in the controllers, not the headset. If you are using rechargeable AA batteries in the controllers and have this issue just remove them for 5 minutes and then put them in again.
For some reason i was doing something and when i came back my controllers (both) they were not working and they were full battery but i used a different battery
My Meta Quest three is not working. Can you make a tutorial of how to fix it like it keeps saying stuff like Meta Quest three servers. Keep stopping social platform keeps stopping and everything is turning black and my controller are not working when I’m in the main menu in. My VR is not connecting to the Internet please help.
is it working now?
THANK YOUUUU, YOU ARE THE BEST❤❤❤❤❤❤😁😁😁😁
BRO THANK YOU SO MUCH OMG I DON'T KNOW WHAT TO SAY
Thank you so much for helping
Thank you so much it works now!
My dumbass thought I broke the controller but I just put my battery backwards😭😭
Same omg 😱
Same😅
Omg thank you so much i was so confused why my controller wasn’t working I thought I broke it or something
My controller only enters pairing mode if i hold the home and b button while inserting the battery, it will say it paired but will not work at all.
Me too
WIELKIE DZIEKI !')))
I just bought it off of someone and I did all of those instructions it didn't work, how do I fix it
For some reason I can't access the headset settings and it is saying it isnt connected, i have had the headset for 6 months and i have had no problems with it until now
My meta recognises the right controlller and its movement but I can’t do anything with it. If I try to select something with it it doesn’t register
Same problem
@@thomassurbellajr3840 take the battery’s out of the controllers and leave them out for like 3 hours and then put them back in. That’s what worked for me
thanks helped right away
Thank so muchhh 😢😢❤❤❤
In the firs it work after 2 days i retry it didn't work
THANK YOU SO MUCH!
It worked tysm
My controller won’t work, (my right one) eg. Whenever I play gorilla tag people say it’s there but I can’t control it. If I do see it it’s in front of me but not tracking my controller, it just sits there. Does anyone know how to fix it?
Having the same issue!
Same
1: They prolly have rechargeable batteries. Change the batteries, and put good quality non rechargeable in them like Energizer or Duracell AA batteries. I don't recommend rechargeable batteries for these controllers unfortunately.
2: Go to the Q3 menu using your hands, go to Devices, and then Quest Controllers. Repair them. Follow the tutorial.
They will work again 100% sure.
thank you sir GOOD VIDEO
My controller itself works like the button menu but it won't track and mine flashes white
mine is doing the same thing, you find any fix?
@@TheRandallBoggssame issue.. I had to restore my entire set to factory settings.. now it works and now I have to reinstall EVERYTHING!! So annoying
@Seagull-- sadly no and my meta quest has been sitting unused :< all I know it flashes white the buttons work but it won't track the movements what so ever
The controller connected but then it didn’t so I tried to redo it and it wouldn’t repair
I thought I was going to get a whooping thanks 😮
I tried to unpaid and pair but it won't pair pls help
same
4
ありがとうございます‼︎トイレとペーパーでfixしましたlol
Thanks it works now 🎉
I have one problem with my quest 3 right controller. In first hour of gaming all is ok but after one hour. When i put my thumb on side sensor panel(this is the angle close to B and A buttons) and on trigger, and than remove all my fingers for wave my hand, its opening like 3 seconds. I recognized it in VRChat. Who know how to fix it?
TY BRO❤❤❤❤❤❤❤❤❤❤
Thanks it worked
It didn’t work and my controller has 3 purple dots when I put it on 😢
tysm! Turns out I put in the battery backwards😅😂
Tysm. I broke my left finger cause i smacked my dresser to hard.
Can some one tell me how to do it evan though I just unboxed it
Thank you so much I nearly had a panic attack hahah
My battery is stuck in the controller
Thank you bro omg
Thannkks
I can’t go in the headset settings it’s Gray
Me 2
Bro my dad was so mad at me that when he saw that it was working he said he did it and that I was to dum for it 💀, but thank you for the help I really appreciate it
Thanks so much :-)
G.O.A.T
My controller stopped working at the start at the tutorial
The headset settings is gray
Because the headset is not on
Brother please help me out i got this shit yesterday and my meta quest button is unresponsive like my g tf can i do i can’t even open any app on the meta quest. i take the battery out and it shows there’s still life. like bffr i just got this headset. i’ve used it twice. this is the second time. like at this point god hates me because it’s every fucking electronic i touch explodes.
Mines to
That happened to me after a bit
I cant do this on my new headset bc i dont have a acc yet bc it is stuck on the pairing page pleas help
Did you to reset your headset?
I pressed the volume down button and the power button and held them down until it got me to the factory reset screen. Try factory reset or boot. If that doesn’t work you may need to trade it in for another one asap. I got mine from Walmart and was able to swap it for a new one. I had the 3s and ended up just getting the 3. Now that I got one that works I love it
Make a ideo where u fix the controller if it's only taking pictures
THANK YOU
When I try to pair my pro controller it doesn't vibrate 10 seconds later a green light starts blinking another 10 seconds later a dark blue light shines😊
Its cool but for me it don't work. can somone help me pleas?
First solution🎉
Thank youuuu though I would have to buy new controllers
Doesn't connect
Wait what
I Agree Does not work
thanks
Thank you my son was sad an I’m going to surprise my son
So what if I dipped the top bit of my controller in the fish tank and the tracking stopped (hypothetically not real 😅)