Hi Eric, I was hoping you'd consider making a video explaining the differences / pros and cons (fuel economy, reliability, maintenance) between 2 stroke & 4 stroke outboard engines. Love your channel, I've learned a lot with the help of your videos. Thank you
Hi there, I’m not Eric but I can answer your question. 2 strokes are the easiest to work on as there are little to no electrical problems in comparison to 4 strokes. They are usually the most reliable as they are much mor simple, having less stuff to break down. 4 strokes will most of the time be more fuel efficient and pollute a lot less. Hope that helps!
have you ever considered putting blocks underneath the long shaft motors to raise them so maybe the boat will plane. had to do this for my grandfathers boat and it seemed to work.
How 3 engine work is that all engines depend on each other to get on plane because of the load and the way it situated. You got lucky by getting that much plane from the center engine independently.
the Tohatsu is the "light 209 ccm "versjon of a 9,9 and i have it on a pioner 10 with 7,5 propeller, then it planes well out and go on plane with 2 persons, the 2 strokes are to noisy, but Tohatsu also have this9,9 15.That is better and equal power in this boat.
I had the same problem with my 10 horsepower Mercury motor.. I got a good 30 minutes out of it then it was in the shop twice the same day I pulled it out of the box.. After that it was in the shop for a year-and-a-half because they didn't have the new parts for the engine I had because it's too new.. I had to threaten the Mercury rep and racer with theft because he had my engine for 1.5 years and he never called me once...
always wondered what a couple of small outboards would do on a smaller boat. Probably not a couple of 25's like you have there but maybe a couple of 10's or 15's.
For Performance mercury all the way for a good combo of durability and performance yammy's def a good choice evinrude and handas are tough but then again it depends on the hp but in the end its mostly on the owners take care of them.
What is the purpose of having long shaft and short shaft outboard engines? Does it have something to do the size of the boat and transom? Just curious. Ive never owned a boat before but enjoy learning something new.
Nothing compares the sound of an evinrude or johnson 25-30 ish hp motor. The yama dog did pull the best imo prob because its a short shaft and better for the boat and newer.
The important question is how long did you spend thinking about trying to figure out how to tie all the throttles and tillers together so that you could run them all at one time? Cuz I know you did because that's the first thing every man that's why she's video has done hoping that that is what you had done
Are you genuinely fucking slow , never did he say "trolling motor" it's a small tiller for backup on bigger boats, please understand outboards before you say some dumb shit
Tebzey actually he said kicker motor.. Wich if you knew anything you would know that people troll for fish like stripe bass. Using down riggers and plainer boards.. ..don't comment on shit u don't know about..
they are ok as long as its tuned. that model year had a few problems related to carburetors and cylinder liners. the 60 that came out in 1980 is an awesome motor... very reliable and probably 20% more powerful.
how do you put the throttle cable back on ....i have a yamaha precision blend model 30HP..............Bolt broke off where the arm is held and ...i tried using my photo memory on how i took it off ....but forgot the moment i had the arm in my hand ....fact that the bolt broke inside the arm ...how its attached ......still tryna figure out how to put those cables on ..from forward to idle ...Make a Video pleeease ...this will help me out ...runs well too my motor ..and my only problem is .properly putting the cables back on ..and id be driving it ...if u help , ill record once i get it working and promote your name. "howbou tha"
@@nitrojunki4249 the prop is supposed to be running in the same depth relative to the height of the transom the boat is only behaving like that as those long shaft motors are in no way right for that boat on my boat a short shaft motor would not even be in the water and therefore equally stupid and pointless
I would never post any of my motorsport video's on youtube,.. I was going to a few years ago but then I see all the pro critics on here and thought why would i post anything at all.
En relación calidad precio y velocidad TOHATSU, no le ha dado al acelerador,¡(cada uno barre para su casa)!, después YAMAHA (esta caro que se paga la firma),y el siguiente, ruido, vibraciónes, exceso de consumo,y caro.
What does 2 -/25 HP motors have to do with a 9.8 one ? The test must be done with each motor sitting at middle transom, the other 2 must remain at terra firma..A pointless water test.
The Tohatsu 9.5 is the best for that boat plenty of power those others are overkill you can't have that much weight on the transom no wonder the bow is high you are plowing. The only reason the Yamaha works best is horsepower. Stupid shit...
The Yamaha is a short shaft, perfect for that boat
evrybody wants to see all three engines running at the same time
yeah exactly
Without the 9.8
Jasper B yeah!
Yeah
2 outboard 6hp
A long shaft works just fine, ask my wife
Dustin indeed
Can't I get a boat engine for my birthday July 3th
I want a boat engine call 25 Yamaha
I did and she said otherwise
@@aveenishsamuel4911
Ķp bom y
Man the sound of the Yamaha slowing down is so sweet sounding
I agree
I've had the kicker start on its own when left in the water, the prop rotated while underway and it fired up. The kicker was direct drive no neutral.
Hi Eric, I was hoping you'd consider making a video explaining the differences / pros and cons (fuel economy, reliability, maintenance) between 2 stroke & 4 stroke outboard engines.
Love your channel, I've learned a lot with the help of your videos.
Thank you
Hi there, I’m not Eric but I can answer your question. 2 strokes are the easiest to work on as there are little to no electrical problems in comparison to 4 strokes. They are usually the most reliable as they are much mor simple, having less stuff to break down.
4 strokes will most of the time be more fuel efficient and pollute a lot less.
Hope that helps!
Man i was hoping to see you throttle all of them at once😂
How 🤔
I had a 2004 johnson 25 . that's the best running two stroke I have owned. that thing was diesel
Whew that’s a lot of weight on that transom lol
Strong transom in your boat!
have you ever considered putting blocks underneath the long shaft motors to raise them so maybe the boat will plane. had to do this for my grandfathers boat and it seemed to work.
How 3 engine work is that all engines depend on each other to get on plane because of the load and the way it situated. You got lucky by getting that much plane from the center engine independently.
I like my 1977 15 EVINRUDE! Long Shaft it'll push my 1648 21MPH
I'm in the bizz. well done
the Tohatsu is the "light 209 ccm "versjon of a 9,9 and i have it on a pioner 10 with 7,5 propeller, then it planes well out and go on plane with 2 persons, the 2 strokes are to noisy, but Tohatsu also have this9,9 15.That is better and equal power in this boat.
Try an Etec 25 or 30. I have one on my boat- Its a BEAST!
i have an Etec 150 behind my 5m rib
That’s a lot of weight on that transom!!
The bimini cost more than the boat lmao
Love the evinrude
I had the same problem with my 10 horsepower Mercury motor..
I got a good 30 minutes out of it then it was in the shop twice the same day I pulled it out of the box..
After that it was in the shop for a year-and-a-half because they didn't have the new parts for the engine I had because it's too new..
I had to threaten the Mercury rep and racer with theft because he had my engine for 1.5 years and he never called me once...
Evenrude... The best. Off the. Best..
At least i have a yamaha outboard
Lake Seminole? So this was just a video of three different motors...that run.
I thought all 3 ran at the same time😂😂
Great job Eric keep up the good work :D
Thank you!
always wondered what a couple of small outboards would do on a smaller boat. Probably not a couple of 25's like you have there but maybe a couple of 10's or 15's.
that 25 along fcking rolling bro
The evinrude was probably hard to plain because it was on the side of the boat too
What's your opinion on the Tohatsu / Nissan outboards?
Get a yammie
Cool test.
Thanks!
See having a long shaft doesn’t always mean better
I get it
Long shaft is only if you have a large transom
Love stem cells there big bucks 20 to 50k a treatment
get a new engine, a new evinrude for example, will really help your boat with all their torque
lxrxnzo yes do you have an etec
Дейвуды у моторов разные, установка на транце не корректная, tohatsu 9.8 hp 4 stroke, yamaha 25 hp 2 stroke, не понятно в чем суть теста ? :(:(:(
The evinrude looks like a dinosaur compared to the others
some more on the tohatsu would be great i have same motor and theres little online with this engine im having cooling issues
Stick with the yamaha
I love my Yamaha
For Performance mercury all the way for a good combo of durability and performance yammy's def a good choice evinrude and handas are tough but then again it depends on the hp but in the end its mostly on the owners take care of them.
Evinrude still makes two strokes at least
Yamaha all the way baby
Evinrude is the best.
What is the purpose of having long shaft and short shaft outboard engines? Does it have something to do the size of the boat and transom? Just curious. Ive never owned a boat before but enjoy learning something new.
Nothing compares the sound of an evinrude or johnson 25-30 ish hp motor. The yama dog did pull the best imo prob because its a short shaft and better for the boat and newer.
Keith Bachand I have 1995 Johnson 60 hp on a 16 foot boat ye ha
Yeah what everyone else says bring a helper and run all three at the same time
There doesn't seem to be a point t this "test". Long shaft vs short 25hp engines? Yamaha vs. Evinrude 25 hps?? 25hp vs 9.8 hp?
Evinrude!!!!!
Wow cool video!
I kinda need a 20 or 25hp for my rib boat, I currently have a mercury 9.9 on it
The important question is how long did you spend thinking about trying to figure out how to tie all the throttles and tillers together so that you could run them all at one time? Cuz I know you did because that's the first thing every man that's why she's video has done hoping that that is what you had done
Test?? To of The outboards have long shaft and one short?
You should have put the tohatsu in the middle then it planes
Maybe they arent planeing bc you have a lot of weight in the back.. YOU and 3 motors
The Yamaha was smoking you need to fix it
Excellent
The Nissan engine gave a descent push
My father and I had in itali a tender 2,5m with 25hp outboard engend we Made 40 knoten (german word) withe it that was fun
9.8 hp is a "trolling" motor for an another boat .... The long shafts are for Sailing boats....
Are you genuinely fucking slow , never did he say "trolling motor" it's a small tiller for backup on bigger boats, please understand outboards before you say some dumb shit
Deserthunter Mike
&$)p
Tebzey actually he said kicker motor.. Wich if you knew anything you would know that people troll for fish like stripe bass. Using down riggers and plainer boards..
..don't comment on shit u don't know about..
David Jessee a kicker is usually used to get home if your main dies off.
Henry Freund that might work..but it's not it's main function..
where I can buy the boat without motor ??
I normaly carry a mail engine and a backup
The boat guy is typing....
The Yamaha is the best
Nice video but you have Waaaaaayyyy to much weight on the back of that jon boat lol
What happens if the boat doesn't plane
That evinrude at idle is trimmed up to much
Why doesnt he let them warm up
Ok there was a big difference between two 25 and a 9.8
What's your opinion on a 1979 johnson 55? I'm new to boats and I've just purchased one.
they are ok as long as its tuned. that model year had a few problems related to carburetors and cylinder liners. the 60 that came out in 1980 is an awesome motor... very reliable and probably 20% more powerful.
Lake Seminole?
how do you put the throttle cable back on ....i have a yamaha precision blend model 30HP..............Bolt broke off where the arm is held and ...i tried using my photo memory on how i took it off ....but forgot the moment i had the arm in my hand ....fact that the bolt broke inside the arm ...how its attached ......still tryna figure out how to put those cables on ..from forward to idle ...Make a Video pleeease ...this will help me out ...runs well too my motor ..and my only problem is .properly putting the cables back on ..and id be driving it ...if u help , ill record once i get it working and promote your name. "howbou tha"
I would, but I already sold the motor. I can if I get another one!
What's the length of your boat?
i'm having a overrev with my 200 3.3l four stroke yamaha
Fix prop hub
Your trying to crab crawl the boat hello
its because it isn middle
Which do you prefer:
The Evinrude 25hp, or the
Yamaha 25hp?
Yamaha is very good but when i have the choice i Will get an Suzuki thats the best outboard that exist
Ok, that's cool
I have an Suzuki 60 hp from 2018 best outboard that i had never fails and runs so smooth
Our boat is a fishing boat, with a '98 Evinrude 25hp. Hasn't failed us yet!
Naturally the smaller engine will be slower!
Do you work in the boating industry or is this just a hobby?
Both kinda
You get some nice motors
This is messed up you can’t compare when they don’t put em in the center of the boat drrr
This could be the most pointless outboard test on TH-cam thus far
aus2045 I
I dont know, I now know what a difference a short shaft and a long shaft makes.
@@nitrojunki4249 the prop is supposed to be running in the same depth relative to the height of the transom the boat is only behaving like that as those long shaft motors are in no way right for that boat on my boat a short shaft motor would not even be in the water and therefore equally stupid and pointless
It’s not about how long your shaft is. It’s how you work it.
Do you sale boat motors
Watched your video about the 90 hp Yamaha outboard motor. I really need to pick your brain. Is there a way that I can reach you?
I like the yamaha best
Mesin tengah itu berapa om
Price for the Evinrude?
$1600
eric edic so much for that evinrude?
1500
LOL
Eric Krzyzanowski I have a 1995 Johnson we’ll taken care of and I bought it at the dealership used for 1300$ so you may be to high on your price
wheres yamaha 20 auto lube
do you have any yamahas 25-40 hp with controls for sale
not right now sorry
I would never post any of my motorsport video's on youtube,.. I was going to a few years ago but then I see all the pro critics on here and thought why would i post anything at all.
Not 60hp in total is 59hp in total 25 + 25 + 9 = 59
What year is the Tohatsu
2006
First off you have to set the motor correct on the back of the boat the motor is too long
name of boat
Save patrol
send a motor for me please
Yamaha 100%
En relación calidad precio y velocidad TOHATSU, no le ha dado al acelerador,¡(cada uno barre para su casa)!, después YAMAHA (esta caro que se paga la firma),y el siguiente, ruido, vibraciónes, exceso de consumo,y caro.
What does 2 -/25 HP motors have to do with a 9.8 one ? The test must be done with each motor sitting at middle transom, the other 2 must remain at terra firma..A pointless water test.
The Tohatsu 9.5 is the best for that boat plenty of power those others are overkill you can't have that much weight on the transom no wonder the bow is high you are plowing. The only reason the Yamaha works best is horsepower. Stupid shit...
Hello
Test no sense! One engine with short foot (for this boat). Give engines with a long foot to a completely different construction.
I was checking how the outboards perform under load because I sell them
old evenrude is a ,piecce of junk,, I had one and never again, even after you become a carburator pro tech
If it’s a piece of junk give it to me. They aren’t junk but if you think so I won’t mind having it.
Pretty pointless test. Try each engine individually, not everyone has 3 25 s on their boat.
I like the yamaha better
Weiner 25 yamaha
That’s great but how big is your fucking boat
L'explication en français serai mieux sinon sans intérêt ?
Dude why even try. Yamaha's are the best. The bigger ones are so much more better and quiet
yamaha sucks and there weak and have no power- needs proper positioning evinrude all the way