Will My $200 Abandoned Outboard Engine Run?
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- You can support the channel by using the Amazon Affiliate link when making purchases:
amzn.to/3fb8dfn
You can also donate directly to my PayPal:
www.paypal.com...
Follow me on Instagram:
/ thatboatguyofficial
Follow me on Facebook:
/ thatboatguyofficial
Follow me on TikTok:
/ thatboatguyofficial
![ทางเดินชีวิต - ธีเดช ทองอภิชาติ x อ.ไข่ มาลีฮวนน่า [Official MV]](http://i.ytimg.com/vi/1f3wcG16dd4/mqdefault.jpg)
We had a 9.9 Yamaha 4 stroke go into salt water at wide open throttle and it actually ran better than ever after we fished it out and changed the oil. There was a dead spot in the throttle before but dropping it in the sea at full throttle apparently cleared out the carbs. Great video, thanks.
Wow lol
A little pressure goes a long way!
Lmao thats awesome, Yamaha is doing something right because people love these outboards everywhere
More like this, plz.
I enjoy the detailed explanations of your process.
Caleb Cannon yesss
*After the Beet Farm was sold, Mose Schrute kept busy fixing small outboard engines.*
Man i still remember how excited me and my kids how happy we was when i finally bought new 25hp mercury tiller took me 2 years to save for only someone to steal from us less then a week its crazy broke my kids heart man
Somebody ripped off my new (bought in 1991) Johnson SeaHorse a few years ago. Babied that thing it’s whole life... had it until 2014. I feel your pain.
Had a 14' 1/2 Cabin gkass with tower of power Merc 90 STOLEN 1 Night .....hope they Sunk in it was still under finance . Felt guts ripped out ! 😠Trev .NZ never recovered .
It did + 40 mph !...
Did they cut through your boat lock or something ?
@@lamontgray6015 I had put the boat on side of my house for little while came back home from store it was gone did a police report we had the 2 guys on camera and truck they had stolen license plates on so cops said they had it planned out so it's a bummer really is
Great video and nice engine. A note to anyone reading this though. Never EVER clean any painted surface with a Brillo or scouring pad. It has the same outcome as sandpaper. It will of course abrade the dirt or overspray away but will leave your paint very dulll and scratched.
Please suggest an alternative
@@michaeloelofsen2881sorry it’s late but you can use a clay bar, I detail cars for work, it works for pretty much everything. With Overspray acetone will usually work without destroying paint
Good old carbed 2-stroke outboards, can't kill em!
Love seeing old 2 stokes come back just shows you if you got some time you can make any thing work get out in the garage and do something.
Love 2 stroke so happy he’s reviving them love his vids too
I like how you repair small engines the exact opposite way of me. I don't clean anything until I know it's mechanically sound. I've cleaned up too much non repairable junk in my life lol
That is one hell of a score! I’ve been searching for a small boat since someone gave me a 1965 3hp Johnson. I just lucked upon a 14’ lone star with a 15hp Evinrude on a trailer for cheap. I’m happy to have it but I already knew I was gonna want at least a 25hp. Well. I’ll be great full for what I have and just keep looking. They’re out there. Great video thanks. It keeps me optimistic.
You need an ultrasonic cleaner for your carb parts. Must have bench tool for these compact engines that operate in corrosive environment. 😊 After breaking the pistons free with Marvel Mystery, put 1-2 tablespoons of foam air filter oil into each piston. That oil is high viscosity and will "stick" to your rings and cylinder walls until the rings free up. That will fix your compression problem.
I was told along time ago to put a bit of seafoam in every tank (for these small engines). Its basically kept my fuel problems to a minimum. I run high octane non ethanol with performance oil for 2 strokes, and non ethanol for 4 strokes with frequent oil changes and things work great. Also an Italian tune up (running engine full throttle and running it regularly) will do wonders, they like to work
He straight pulled up to McDonald’s in da Jon boat 😳
So?
Da Jon boat doe😳
5:46 I could smell that lol
More outboard repairs/service please especially on some of your bigger ones.
Instead of using Brillo which dulls the clearcoat finish, you can use denatured alcohol which removes the overspray but doesn’t harm the clearcoat finish.
I cringed watching him do that
agreed, dont use steel, plastic scraper if it is latex paint
She's seen some sandbars LoL polished tail fin and prop. I had a 25 like this and yes you're right they're one of the best I've ever run along with the older Johnson evenrude engines. 👌👍 Good vid
Love this channel!! I love seeing your thought process on getting these to run! Really appreciate you and your time!
When it comes to corroded parts, we (here in Germany) have a method to get it all shiny and clean again, it's basically sandblasting but with walnut shells.
The video is called; 7500€ für T5 mit Pumpe-Düse-Defekt! Nussschalen vs Soda: Was reinigt verkokte Einlassventile besser?
Cheers
Nik
BEACH SAND works too will clean without damaging plastic
@@TheDoug9901 That will greatly depend on the beach. Tropical beaches where the sand is mostly shells and coral, this is probably a viable option. Our "sand beaches" locally are mostly quite hard rock minerals, which is not ideal for soft metals and plastic =)
@@LeftFlamingo ours the sand is small granular and aggressive as flour I can remove bottom paint and leave fiberglass shiny and its FREE
We know, you twat. It's called media blasting and is commonplace throughout half the planet.
JFB 101 dang!!! What triggered you? Geez
Awesome video! I bought my first boat and motor last year and they're coming along nicely. This video gives me alot of hope that motor will turn out this nice. I got a 1986 8hp yamaha 2 stroke that needs carb work and the lower unit needs to be serviced
It’s these kinda videos that got me into your channel at the beginning, love the mix of what you do always good content.
I did the same thing with a short shaft 18 tohatsu i picked up for $150. It had been sitting outside since 2002! It was partially stuck and needed a new $60 cdi unit, plus a water pump, plugs and t stat, and carb clean. Thing started on the 2nd pull! These japanese small motors are amazing.
Wish I was there to smell it fire up. Love that two stroke smell.
Is that sunken sailboat your next project? You could pull it off I’m betting
I think the funniest part is that you keep saying 1998 like it was a million years ago. Doesn't seem like that long to me but then I've got a lot of stuff that's even older like my 1985 Toro snowblower the boatload of tools from the same time period and then there's the '70 Chevelle. These years pass all too quickly and 1998 seems like just yesterday to me. Great job rehabbing a real workhorse.
To put it into the proper context. ..
In 1998 we were still using dial-up modems. Remember?
Pepperidge Farm remembers.
It's ages ago to a modern kid. By the way I'm using a 1978 Lowe with a 1999 Johnson on it.
@@mikeries8549 Luckily Pepperidge Farm knows how to keep their mouth shut as long as you keep buying their cookies.
How lucky was you with this engine. Well done guys. "Great Job" as you Americans say. Keep them coming. Eamonn Evans (Worcestershire) England.
Am I the only one that believes the time he puts into to his videos he deserves more support the TH-cam platform should really help him blow up
I would agree, but without punctuation its hard for me to read your content
@@Sausketo then why are you reading it... Did you let him off with a warning or did you give him a grammar citation
@@MrMd5555 more like a comment grammar nudge, i dont expect anyone to change, but if a suggestive comment can do it, then i will do it
I have 1963 Chrysler 15hp two stroke with 75 and 80 psi on compression test, it starts and runs great. Nice video seeing all the water at the end of winter
Excellent video no stupid music I did this in my younger years makes me want to get back in buying and repairing outboards
Wow! Great find guys, you deserve it! Now that motor is worth 1,500 or more. New 4 stroke 25 costs 4,000 dollars and that's a better motor!!
Love the outboard videos as much as the resto vids. Great video dude, love Yamaha outboards.
Also the drone flyover videos with the music are brilliant- look forward to those
I have that exact year 25hp that is still running strong. Great motor.
So do I. One pull!!
Really enjoy watching you restore boats. keep up the good work
Those 2 stroke 25 Yamaha's are very sought after, they still go for ridiculous money. I have one on a 14 Jon and we've had it to 35mph on GPS. They ripped for a little 2 stroke.
The best way to learn about outboard fixing, troubleshooting and servicing is to watch your channel, thank you
Why is a guy fixing boat motors so fascinating to watch.
I was lucky in a similar situation, scored same motor on a boat that had sat for many years and was covered in shit. A good clean out and runs great for dirt cheap. I can imagine people finding these motors for decades to come and doing the same haha
Nice work. It great to how you bring these things back to life.
You should introduce the people that come on the boat with you. Maybe even invite different guests.
What do you do with the repaired motors?
Not milky duos means the seals WERE in good condition, now sitting for 7years will make them most likely not.
you can fix any outboard. I wish I can do same as you
1:09 really clean engine it’s just dirty😂😂
Automotive Clay bar works wonders for overspray
P.S. And it doesn't scratch the paint
Always love your videos. You make it look so easy. The explanation is always easy to understand and I love the music and the video at the end… Keep them coming.
Boy you hit it good on that one those are great sellers on the used outboard market .I just sold an 1986 Johnson 25HP mint condition for $850 and I paid $25 for it needed just the lower steering mount ,tilt bar and a carburetor cleaning so I know good deals when I see them.Great video really enjoyed it its usually 60% good-40% not good for me freeing up motors when they are seized from sitting or submersion and the rings arent stuck too bad.Its great when you really enjoy it & its a great way to make side money and make available affordable outboards for many people who just cant afford going $4000 or so for a new one....Glenn P.
Add fresh Yamaha white paint to the prop, and Yamaha blue to the skeg. I have sold a few outboards and it is amazing how much something so simple as touch up paint can speed along a sale and increase value for your sale.
Noticed you went to the trouble of getting a replacement kill switch strap and didn’t bother wearing it! 🤔
Great fine. $200 well spent , However the real money is in knowing how to fix it. That can be priceless. If I owned it it would probably just stay stuck in the garage.
I use to live in Seminole, there was a McDucks by the Middle School on Seminole Blvd. Anyway I recently gave my boat and 40 horse Mercury to my son and law because I’ve had it to a boat repair shop twice, and when I put it in the water it would run fine but underpowered it wouldn’t excelerate and would flood out? Each boating adventure ended up as a float trip. Now I live on Flathead Lake in Montana.
You do a Beautiful job on your videos, and I enjoy each and everyone of them. You are also a GREAT mechanic! Keep up the Good Work!
i love yahama 2 strokes they just take so much
Would love for u to give a purchase price and then a final finished price
Bought for 200 bucks. MRP maybe $3,000 - $3.500 new. Second hand pricing rule of thumb: 50 percent of original price if nearly new or about a third of original price depending on condition. I would not have taken less than $1200.
miss these kind of videos
You can hear the bearings roaring on that yammi. It’s normal for them to have good compression but still have bearings going south from being submerged.
For $200 an if it last a little while still well worth it
Love the KC lights the boat the motor the ARB bumper love it hahaha
I swear some motors have a soul, some motors are in rough shape but they dont wanna die
I like the old flat bottom thing takes on all comers and has a lot of room on it you go brother I'm enjoying your videos
I completely rebuilt an original 1964 Kiekhaefer Mercury, four cylinder 50hp. I did that in 1983 when I was 18 years old. Easy peasy. What really hacked me off in your video was you taking a Brillo pad to remove the over spray and then take said Brillo pad to the rest of the outer, original paintwork. Lazy, stupid and detrimental. Best regards from Hartlepool, England.
Like ending videos with the drone shot. Maybe show how to disconnect and connect the shift shaft when you lower the lower unit. Could prevent damage to shifter.
Do you ever get stuff that doesnt work? I dont think ive ever watched a video where you couldnt get a motor working and looking like new. Great job and thanks for the free outboard education
All depends on the needle bearings , might run well now but if you have any corrosion on them they will rapidly fail
Yup needle bearings on rods and also ball bearings on the crank they are allready rattling like a bag of nails probably won’t last too long before they fail
It’s JAPANESE, what did you expect. Killer score Buddy.
You guys rock! Yamaha's rock. I'm still crankin a 1994 200hp saltwater series on my Grady White.....Same place you are...
6:01 can smell that 2 stroke smoke :D
Dude....I can't believe you used a Brillo pad on that motor. You can go to most any auto parts store and get a clay bar kit to remove overspray. It also cleans all the debris from the paint. All that is left to do after that is wax the motor.
i have his big brother , the 30 hmhl 2 stroke bought it brand new 2019 and i'm so happy with it
kouki_tv brand new 2 stroke in 2019?? Mate where do you live
@@Luuk4444 i live in algeria , two stroke are still in the market , thr two famous brands here in algeria are the yamaha and tohatsu , tohatsu has two stroke called everrun they are a real work horses 🐎
kouki_tv You are lucky guy, here in The Netherlands we can’t buy new 2 strokes anymore for envoirement friendly bullshit...
@@Luuk4444 too bad for you my friend , you can't buy even a second hand ?
kouki_tv ahahahahahaha easy, but I prefer a new motor, you never know what the previous owner dit with it.
Well done with that outboard
These motors you work on are definitely my childhood ones lol, great job bud
I don’t even have a boat but I want one of those engines lol 😂 thanks 🙏
Man.....you are really fortunate! Awesome video
I’m a motor mechanic and love how you approach every task. Thank you 😊
I love your videos keep up the good work
Incredible dude! Wish I lived near you.
Best 200 bucks you ever spent, can't beat a Yamaha oh, I still got a 1972 AT2 Yamaha Enduro still runs.
My family has an late 80s or early 90s yamaha 9.9 2 stroke and it still has its original impeller to this day it looks brand new and the engine is used alot!
When you doing the buffer in the 2:50 you can see a crack on top right side.
I love your videos, they are so educational
Here in Brazil, outboard engines are very expensive.
Those you restore would easily be sold.
I got a -90 and a -91 Yamaha 30 hp, still original impellers and they're still pumping just fine 😅 Maybe it would be time to change them...
Yamaha two stroke engines are the best outboard i ever saw. Cheap,simple and dependable.
Unless it's locked up, chances are all any engine needs to run is fresh gas, a carb rebuild, and some new plugs.
Wow !! well done amazing work man !!
That’s bad ass I need to find me a motor like this.
I found one similar, $100. Original owner told me tried everything he could to start it after 2 years of no use, but couldn't. I took it home, found no spark, disconnected the kill switch and started it straight up!
1 Happy me.
Find my self a perfectly running yamaha precision blend 25 hp for 400$ i was so happy. Good compression eletric starter!
Always watching to learn from you . Did you got to outboard school?
THANKS SO MUCH FOR THE VID. I HAVE OFFICIALLY WATCHED LIKE 90% OF YOUR VIDEOS AND I THINK IT'S SAFE TO SAY THAT THIS ONE IS DEFINITELY THE BEST
I had one similar and ended up under water for months until I found it cleaned the carb let it dry out and it’s was perfectly fine still running good after 3 years
Hear I am at 3am watching a guy fix a boat😂 I enjoy working on things so this is just my style btw I enjoyed the vid keep it up
You make great videos… thanks for your efforts
You know your engines thats awesome.. 200 bucks ...120psi on both cyl. Plenty of life left.
1st..."Livin' ur Best Life", bud..2nd...I assume both of you can swim/float, hence no LPV's..3rd..I assume you trusts ur work since I didnt see no paddle/oar on board.....Cheers...BTW, many of us wish we were you...Doin' what you love and lovin' what you do is never a bad day or a job.....Cheers again...
ToyManFlyer1100 you can see the LPV’s clearly at the bow of the boat.
I bought a 25 yamaha for my heavy 14 ft boat, I think it was a late 80's. Got it serviced and pulled her up to 26 mph. But it wouldn't idle without shaking the boat apart. That motor seemed to have the same idle rumble
I had one of these, great motor. Twin carbed.
Acetone would have taken the overspray clean off without damaging the underlying paint. Wire wool on the other hand is the absolute worst thing you could have done.
I really need to learn how to seek out these barn finds. I bought a boat with a motor thats 10% of what its rated for. I want a 30hp (boat is 60hp rated) but I dont want to spend 1-3k on a replacement when I bought the entire combo for $800.
great video
i love great deals like that
i picked up a wilson flyer 14ft with a yamaha 85 hp 1990 that had been sitting in a drive since 2007 all we did was clean the carbs , new plugs and freed the engine off away she runs and with buying it and parts it stands me in £450
This is awesome man!!! I get overwhelmed when working on my motors for my sailboat. I have a outboard well, so I use a 10hp 2stroke evenrude
I'm enjoying these. Do you have a video on how to set up a motor height and angle for optimal speeds?
Why ?
The smoke comes out of the propeller, which must certainly pollute the sea
But very nice machine and very nice landscape !
WOW what a SCORE!!!!!!! That engine can go for EVER!!!
Another great video!! Love these outboard resurrection videos!!
It actually looks in good shape
Sounds like a Yamaha great job bringing her back to life!!! What a score keep em coming man!
Probably because it is