I used a 2x8 burned it & stained it to make it look good after cutting out cup holders, then mounted it to the little flanges that were already there... along with my racher shifter then i mounted the ammo can to back end of the 2x8 where the center console would be. Looks sick.
Try the junk yards off of Deer Valley Desert Valley Auto Parts I always came across some Hondas back in the day sometimes compleat cars still untouched there like 5 yards in that area
Hahaha!!! I do the same to my phone too! Stuff the holstered pistol in the middle at an angle so I can just reach n pull. Last resort will be the old school window cup holder. Worked for a while for me. #benchseatlife #benchseatmafia
Junkyard runs are the best fo sho I usually take a back pack with tools just so I wont have to carry a bag of tools around. also it frees up both hands when you have to carry your parts around. That blazer wing is goofy to me 😁
Hey man this might help if you’re holding your window because it tries to come off track. There’s a clip that you can buy from parts store that clips into the hole on your window and holds it in track. 11:28
I think you have an nv3500 from a fullsize truck. They have a few differences from the s10 version with the shifter being one of them. Luckily there are a lot of replacement shifters for the fullsize version readily available online. Finding a replacement shifter for an s10 nv3500 is pretty difficult
Yo!!! Bro, I'll pay you to go get those wingless hinges and hardware off that blazer in the junkyard @ 21:17 and ship them to me... been lookong for them forever.
Tell me the dimensions of the cup holder and I'll make you a custom red bull adaptor and 3d print it for you. And tell me the size can you usually get! I'm a 12oz guy😂
Watch out don’t catch a speeding ticket with that Drag Wing on and no parachute 😂 I know ow is your truck but I liked that baby without it just saying don’t block me
Accordion 🪗
Thank you! 🤣
@@deadbeatgarage my pops used to play it back in poland 🤣
That hole in the wall bruh 😂 someone definitely pulling off night heists 😭👀
I used a 2x8 burned it & stained it to make it look good after cutting out cup holders, then mounted it to the little flanges that were already there... along with my racher shifter then i mounted the ammo can to back end of the 2x8 where the center console would be. Looks sick.
lol dope bro... hey you can add a rubber trim to that last piece and the red bull will definitely be snugged.
Dad & Son doing it up wish I could get my boys in with me
I have a 87 very similar to this that came with a rubber floor, it was tore to bits but it stretched from front to back two pieces
Try the junk yards off of Deer Valley Desert Valley Auto Parts I always came across some Hondas back in the day sometimes compleat cars still untouched there like 5 yards in that area
U love going to the junkyard. It's my favorite place my Dad took me when I was a kid.
Love going to the junkyard, I put all my tools in a backpack and it makes life a lot easier.
❤❤❤❤❤ happy valentine day to u and ur family love does junkyard video
Door tag will tell you the axle code. D2, 4:10 limited slip. You can look up to a 2001 explorer. I like the channel bud. 👍
Good work brother that was a sick run !
Junkyard come ups are the best!
Bravus called an Accordion a Saxophone LOL, just flippin shit but that center console came out sweet like it was meant to be. #DBG #DBFam
Your a true D.I.Y. specialist broski 💯😎🤘
Put a washer in the hole to help hold the center console a bit better. ... a small holesaw can also pretty much make a perfect washer aswell
Gotta love the junkyard runs never know what you might find. 🔥🔥🔥🔥
"DB~FAM" 🔊🤙🏼💯
Stoked for ya bro! Nice console
Sup dbfam, gotta say it but remind us to like the video a bit more! You put in so much work and i try like every video I just damn forget 🤦🏻♂️🤣
Nice run you did like the ceneter conceal
Hahaha!!! I do the same to my phone too! Stuff the holstered pistol in the middle at an angle so I can just reach n pull. Last resort will be the old school window cup holder. Worked for a while for me. #benchseatlife #benchseatmafia
Junkyard runs are the best fo sho I usually take a back pack with tools just so I wont have to carry a bag of tools around. also it frees up both hands when you have to carry your parts around. That blazer wing is goofy to me 😁
When i take a bag of tools i cut a seat belt in the yard and make a strap to hold the bag for you to free up your hands and make carrying tools easier
@@salomonramirez9935 never thought about that. 👍
Or the little wagon you pull with off road tires whenever your going for wheels or etc
My 87 2D Blazer has a full rubber/vinyl factory floor.
Get You A DJI Osmo Action Camera, Way Better Than Go Pro, Their Battery Last Much Longer. 3D Print You A Console.
Looks good bro well done
Get you a pvc pipe for that cup holder, make a cup holder extension
Hey man this might help if you’re holding your window because it tries to come off track. There’s a clip that you can buy from parts store that clips into the hole on your window and holds it in track. 11:28
THE 392 BLINKED! HE WAS RACING!
Best mod for sure happy Valentine’s Day man
Your so creative brotha love the videos
21:59 that’s mad maxx bro 😂 dude was in ☝🏽 too many streeet fights
You could put a washer at the bottom fill it with epoxy put a wash on top too drill the hole out and you can rivnut it in with a bolt
Came out nice!!
Looks awesome great video
You should definitely grab those wheels for the s10
That wheel u kicked by that Eddie bower. I have a clean set but one is bent bad. I need that ish
I think you have an nv3500 from a fullsize truck. They have a few differences from the s10 version with the shifter being one of them. Luckily there are a lot of replacement shifters for the fullsize version readily available online. Finding a replacement shifter for an s10 nv3500 is pretty difficult
Look forward see more do with your turck. Keep me posted on your video
Lets gooooo! I cant ever find good s10 parts in my area thats awesome 🤘🏼
Sweet ass console..really fits 😅
Junkyard trips are always fun even if ya don't get anything. I need to get s10 parts this week myself
Junkyard tip I use a schoolbag to carry my tools
Nice score
That ending part needs to be on a shirt
So... You should go back and grab the S10 grill. They sell for a pretty penny.
Crown royal bags make good shifter boots
RedBull for the win
Replace the shifter bushings it’ll fix that slop
12:30 and that’s why Braven is the way he is lmfao 😂
Hell yeah
An ammo can center console would fit the look of your truck.
Just glue a washer to it bro!!!
Yo!!! Bro, I'll pay you to go get those wingless hinges and hardware off that blazer in the junkyard @ 21:17 and ship them to me... been lookong for them forever.
my 99 2nd gen dodge has exactly what your looking for! no idea if its factory or not lol
I take a 306-piece tool set and a backpack full of 20v tools just in case I find something I want lmmfao
Also u could try plastic welding that hole closed
Just seen the part where u said u didn't want to go that route... Anyway carrying on
Marcus was there 😂
#DBFamStrong #BuiltNotBought
The name of the instrument is called an accordion
You could have used fiber glass to fix the center console bro
Use a hurst shifter boot
i need the driver floor of that eg lol
If the s10 had a 2.2 in it. It came with nv1500. Need s10 that had 4.3 in for it to have the nv3500.
Non airbag black dash, never to be seen again
No I take them all because if I don’t I’ll need anything and everything I do t have with me to get rid t out.
That setup looks sick as hell. And the axle tube solution mint 👌
You need a Toyota Tacoma center conceal
Yes bro just incase filler up😂
👍👍👍
Tell me the dimensions of the cup holder and I'll make you a custom red bull adaptor and 3d print it for you. And tell me the size can you usually get! I'm a 12oz guy😂
Could have used a chevy Cavalier
Please can I know your CRV tire specs please 🙏
According is the instrument idk if the spelling is right but yeah
Watch out don’t catch a speeding ticket with that Drag Wing on and no parachute 😂 I know ow is your truck but I liked that baby without it just saying don’t block me
Blocked MF 🤣
Ig box ??
It's a Toyota Helix
🫡🇳🇱
Like the junk yard videos it sucks junk yards are looking bare with very little 90s cars 😐