I have a mk6 fiesta like this but a style 2006. Have same issue since I played about with he fuses to get my cigarette lighter working. I'm hopeful it's the same problem. Thanks for the video 😊
Unfortunately that wasn't the same issue. I'm thinking because it's been sitting off the road that the car battery has went too low for the immobilizer to bypass. Well I'm hoping that
@@AliHamad-bs8ds no bud. Tried everything. Resoldered instrument cluster, cleaned engine ground points and checked all fuses. Battery is less than 10v though but already tried charging it. Could a dying battery cause immobiliser to not bypass?
Hi I have a 2007 FORD FIESTA GHIA 1388cc Petrol, 5DR Hatchback, Manual My ignition barrel will no longer allow the key to go to the click position that allows the driver to put the windows up and down and when I attempt to start the engine it fires up but then the immobiliser kicks in and cuts the engine dead. Mostly nothing happens at all. Some times it don't even turn over. Is this expensive to fix? Thanks
Thanks for the video! My fiesta just broke down and the same sign is flashing. But I have RAC called out tomorrow. Where can I get a new fuse from? And which size tool did you use to disengage the battery? Thank you!
Hi I’m glad that the video is helpful to you, it was a 10mm socket set which you should be able to get from Halfords, you can also get fuses from Halfords too.
@@zabzproject1416 ahh thank you so much for a quick reply. I'll try and get to Halfords before the man comes. How did you test the fuses.. Just take each one out and check it if it's broken?
@@snazye no worries we are glad we could be of help, you can get a fuse tester and test fuses via touching the tester to the metal bit of the fuse, if you don’t have a fuse tester then yes.. you will have to remove the fuse one by one and do a physical check etc.. Try and have a look at the fuse number I’ve mentioned on the video. Thank you for supporting our channel 👍
I see your Fiesta keeps flashing the immobiliser sign after the fix when its turned off , so that's normal for a Ford ? (New Fiesta owner and i doubt if its normal when I step out lock the car and still see it flashing)
Please read how many flashes and then it will take a second pause and then count again how many flashes? As this will indicate to a fault code. Thank you
@@ChantellePyne try to reset your immobiliser by these steps: lock the car, unlock the car, and allow the key to sit in the ignition at on position for at least 30 seconds to re-pair with the car. If it doesn’t work the first time try it again 👍
@@saidkhouna7042 To be honest were not mechanic and can’t give you a pin point kind of information. But doing quick search the Electric accelerate fail could be simple as cleaning the the Throttle body but please make sure you disconnect the battery before cleaning by the Throttle body. But would be the simple and cheap way of checking EAC and if that doesn’t cure it need to get it checked from a garage and see if they can find fault. Hopefully someone reads your message who might have been through the fault and could give more light to this. Hope the info was helpful.
Yes it is an Aerotop converted to 5 spd Manual. We have many ‘Supra MK4’ projects pending for the future... If you would like to see us do a Supra pls comment, subscribe & share 😇
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 4 | 13 ต.ค. 67](http://i.ytimg.com/vi/h8N9tY46P-M/mqdefault.jpg)
You a good man, daughter’s car sorted thanks to you!!
@@reubenkatzpianos Your most welcome, we really appreciate your positive feedback 😍
I got this 16 code after jumping a flat battery. Replace the fuse, sorted. Great video👍
Glad it helped, we appreciate the feedback and support 😇
Saved me a bunch of headaches, I jump started a van with my 1.25 and it musta damaged the fuse but not blown it. This fixed it.
I’m glad that this video was help to you, thanks for your support 👍
I have a mk6 fiesta like this but a style 2006. Have same issue since I played about with he fuses to get my cigarette lighter working. I'm hopeful it's the same problem. Thanks for the video 😊
I hope you get this sorted, all the best 💪
@@zabzproject1416 will find out tomorrow bud but has same symptoms your car had
Unfortunately that wasn't the same issue. I'm thinking because it's been sitting off the road that the car battery has went too low for the immobilizer to bypass. Well I'm hoping that
@@hendoiii3487did you find out the issue?? I also fixed the cigarette lighter with a new fuse and have the same issue now
@@AliHamad-bs8ds no bud. Tried everything. Resoldered instrument cluster, cleaned engine ground points and checked all fuses. Battery is less than 10v though but already tried charging it. Could a dying battery cause immobiliser to not bypass?
Solved my issue, thank you very very much!
What’s the OBD reader you’re using?? And does the immobiliser function bypass work through that app??🤔
Great video bro always start with the basics init 👊
@@josephstjohn3871
Thank you for the feedback, your support means a lot
Brother thanks a lot you save me , have a very happy new year...👍🏻
Thanks dude, it was a blown fuse. 😀 Problem solved.
Your welcome, that’s brill 💪
Great video mate I’ve had this issue many times
Glad it helped
Thanks
Thank you, it was exactly my issue as well
Thank you for the feedback, we are glad this video helped 😇
Watch out for buying non starters. Because you when you get it home and solve the start issues you'll find it's got a blown head gasket or a knock?
Your 💯 right, it’s a huge risk buying non runners unless it’s from a well known source or extremely cheap 👍
Excellent tip..keep up the good work..thank you
Thank you for the feedback means alot.
Thank you so much! It was my fuse!
That is great, thank you for the feedback
I have this problem since I had my battery changed. I will try this. Thanks
Yes, pls look at the basics first before you end up spending money for no reason 👍
Thanks so much, that actually worked
Really glad to hear, that it’s helped you out 👍
Would that be the only possibility.and how do you check if a key transponder is broken and need to be replaced
Hi
I have a 2007 FORD FIESTA GHIA
1388cc Petrol, 5DR Hatchback, Manual
My ignition barrel will no longer allow the key to go to the click position that allows the driver to put the windows up and down and when I attempt to start the engine it fires up but then the immobiliser kicks in and cuts the engine dead. Mostly nothing happens at all. Some times it don't even turn over.
Is this expensive to fix?
Thanks
This video saved me hundreds thank you
Hi, glad my video could help you in such way 👍.
Thank you for supporting our channel 😇
thanks huge help too me much appreciated
Hi, your most welcome..
Glad this helped you out 👍
Pls help my fiesta mk6 cranks but don't start after changing oil pump... Started perfectly, now when I'm about to test it.. It doesn't start
Thanks for the video! My fiesta just broke down and the same sign is flashing. But I have RAC called out tomorrow. Where can I get a new fuse from? And which size tool did you use to disengage the battery? Thank you!
Hi I’m glad that the video is helpful to you, it was a 10mm socket set which you should be able to get from Halfords, you can also get fuses from Halfords too.
@@zabzproject1416 ahh thank you so much for a quick reply. I'll try and get to Halfords before the man comes. How did you test the fuses.. Just take each one out and check it if it's broken?
@@snazye no worries we are glad we could be of help, you can get a fuse tester and test fuses via touching the tester to the metal bit of the fuse, if you don’t have a fuse tester then yes.. you will have to remove the fuse one by one and do a physical check etc..
Try and have a look at the fuse number I’ve mentioned on the video.
Thank you for supporting our channel 👍
@@zabzproject1416 ahh okay thanks. Fingers crossed I can fix it without a big bill 🤞
Sorry what amp was the fuse? 30?
I have this problem now :( it’s such a pain
I see your Fiesta keeps flashing the immobiliser sign after the fix when its turned off , so that's normal for a Ford ? (New Fiesta owner and i doubt if its normal when I step out lock the car and still see it flashing)
Yes, that’s normal as it’s the immobiliser kicking in when the car is switched off.
It should stop flashing once the car is started 👍
What fault code is just repeating 6 again and again?
All my fuses are fine I had a diagnostic test and it’s not picking anything up it’s just flashing when I turn on ignition
Please read how many flashes and then it will take a second pause and then count again how many flashes?
As this will indicate to a fault code.
Thank you
@@zabzproject1416 1:6
@@ChantellePyne try to reset your immobiliser by these steps:
lock the car, unlock the car, and allow the key to sit in the ignition at on position for at least 30 seconds to re-pair with the car.
If it doesn’t work the first time try it again 👍
@@zabzproject1416 I’ve already done that I’ve had so many people come out to look at it
Do you to disconnected the battery if its just a fuse
Yes always disconnect battery and then replace fuse / relay
👍
Why does the rev counter not start when the engine does?
Hi, the rev counter was slow catching up with the engine but eventually did work, I believe it must of been corroded soldering 😢
Thanks for the video, it helped me out. Cheers mate.
I’m glad to see it help you out 👍
Thanks for watching & supporting the channel
Thankyou very much it worked! 👍😃
That’s great to hear 👍
We appreciate your support and feedback
Thank you
Cheers my man, saved me a bomb
Brilliant, it’s good to hear it worked for you 👍
Mine only 6 flashing any idea
Hi, apologies about the late reply.
Does the car crank or start?
It's ok it was a faulty ignition awith
🎉🎉🎉🎉. . V.
My focas mk 1 is flashing like that 1.5 flashes
Wow have you got a r34 sitting at the back 🥹
Hi yes we have many skyline r34, r33 & supra mk4’s..
Please check out our channel for some other content 👍
I have a message in my ford fiesta 2005-10-06 EAC FAIL
@@saidkhouna7042
To be honest were not mechanic and can’t give you a pin point kind of information.
But doing quick search the Electric accelerate fail could be simple as cleaning the the Throttle body but please make sure you disconnect the battery before cleaning by the Throttle body.
But would be the simple and cheap way of checking EAC and if that doesn’t cure it need to get it checked from a garage and see if they can find fault.
Hopefully someone reads your message who might have been through the fault and could give more light to this.
Hope the info was helpful.
@@zabzproject1416 thank you so much
01:00 , Is that a Supra ? 😍
Yes it is an Aerotop converted to 5 spd Manual.
We have many ‘Supra MK4’ projects pending for the future...
If you would like to see us do a Supra pls comment, subscribe & share 😇
@@zabzproject1416 done 👍🏼
@@Cyber0555 we appreciate your support, Supra project coming up.
Watch the space 👍
IS THAT A SUPRAAAA
Hahahaha
Oh yes it is!! 😍
its 16