Drive belt replacement on a 1998 Toyota Tacoma
ฝัง
- เผยแพร่เมื่อ 4 ก.ค. 2024
- Tekton 12 x 14mm wrench: amzn.to/3BrrpBe
0:00 intro
0:15 remove power steering belt
0:48 remove air conditioning belt
1:11 remove alternator belt
2:04 replace idler pulleys
2:56 install alternator belt
3:44 install A/C belt
4:12 install power steering belt - ยานยนต์และพาหนะ
Hands down one of THE BEST INSTRUCTIONAL VIDEOS. Subscribed
This was great help! That alternator belt was a pain.
Great job, Paul. Your video was very concise and clear!
Perfect instruction for my 91 Tachoma. Great tip on getting that long ratcheting wrench. Really needed for torque on the lower alternator nut. Nice Sunday morning job. Live in the desert, so idlers were rust free/good still. Thanks.
Amazing video loved the detail and demo photos!
Incredibly helpful and super easy to follow, thank you!
Great job.
Now waiting for more RAV4 content!)
Really well done, congratulations.
Rad vid, keep them coming.
Very well done and informative getting straight into it 🤙🏻
The 22re. My favorite Toyota engine next to the 2jz.
Lol no
great video, very clear instructions and video.
This was GREAT! TY!!! I've got a 2001...same exact layout.
Great job
Perfect video thank you
Great video !
Awesome video. I replaced the alternator and battery on this same engine today for my friend 2004 Tacoma 2.7L), but now his car won't start. The engine won't turn over. I changed the alternator because after a long drive earlier this week, the next morning the truck had a really loud squeal which I figured was from the alternator pulley since it was the original (18 years old, battery 6 years old). What do you think the issue is here? Should I just go ahead and replace the idler pulleys and belts, too, or did I just get a lemon alternator (AutoZone reman) or is my alternator belt on too tight? I tried to start it with different tensions on the belt but it just wouldn't turn over!
Did you somehow lift the truck to get some of this underneath work done?
Where do you get your idler pulleys? I bought some drivestar for my 1998 SR5 and the washers don't seem to fit with them. Not sure what to do.
How did you get to a/c pulley??
perfect.
Does anyone know why the front dust covers are different on the two idler pulleys? I know they came that way but why? The pulleys he is putting on are identical. The pulleys coming off are both different. Wonder why Toyota did that?
I cant believe how easy this is. I tried doing a timing belt replacement on my 97 civic and it felt like a nightmare lol
these are accessory belts not the timing belt. the 2rz-fe has a timing chain, not a belt. but yeah timing belts are harder jobs
shouldve bought this wrench. i stripped my power steering pulley bolt
is this your tacoma??? just had my drive belts done at toyota !! that hurts ! i dont know jack about cars...wish i did.. do you work on cars for the public?
Is there a way to change just the alternator belt without having to tear them all off?
Nope. It's behind the other 2 belts.
Does anyone have an advice and to why the tension pulley on the middle belt would be such a bitch. Can someone please help
It might be stuck. Make sure to loosen the bolt in the middle of the pulley. It was pretty easy on the truck in the video.
@@LabCoatPaul yeah that we tried that the bolt on the pulley was rounded of we had to cut belt off which means we have no ac now which is fine cause of the time of year
Well I just want someone to put out a real video where everything goes wrong and what you do to overcome these obstacles. Like when a belt won't go on no matter how hard you try.
The tension pulley on mine up under the compressor (middle belt won't losen at all) any advice?
You fucked up with non japanese belts on japanese engine. Best belts for Toyota engines are made by Bando, japanese belts. You will see very soon, why.
My Bando belts for the same truck say they were made in the USA. Are they Japanese? Thanks.
@@eddie7319 They are Japanese.
Do you mind to explain? Is it design, quality, or both?