What's up GOLD GANG?! I hope you guys enjoyed this video, I had a lot of fun riding it, I mean making it! Big thanks to my Patrons: Nikita Glybin Matt Drui Dominic Bowers
Hi mate ! i saw this video on TH-cam and i thought it might interest you since you are building motos and dont have an Motorcycle Hydraulic Lift Table : th-cam.com/video/C-A2MS5YU_Q/w-d-xo.html
Man, everytime that I see your videos I get jealous. I'm a Brazilian fan and I'm always showing your videos to my friends who like the idea of customize their motorcycles, but here is really hard to do that, there's a lot of burocracy and parts are really expensive or hard to find, but someday I hope that I'll be there building custom bikes and riding without caring about being robbed in each street signal that I stop. Btw nice video!
that's why i grease up my axles now. my xr200r is the same way but my swing arm lets the axle slide back. my tires are way worse 0 nobs and hard rotted😆
Using a sealed bottle as a fuel tank will create a vacuum as the fuel drains and starve the engine of fuel. If you poked a hole in the top of the bottle you could have road a few miles without a problem 👌
Well you rode it . Right on !. I bought a honda cm250c 1982 for 100 bucks. This bike kinda looks bad been in the guys back yard for a long time . Only has 16000 on it so i think the motor will be good. Missing some parts like shifter peddle , brake peddle, and the carburator. I am really excited to restore the bike as a tracker . Just wondering if you could help me along the way. This will be my first build. Where is a goodd place to get parts online........Thanks!
You did it brother ,it sounds awesome ..like I said before in the last video.. this is going to be your best motorcycle .you should be very proud of yourself.
Good job! I'm fixin one up myself but it's in slightly better condition than yours was. Nice music too! I just finished up making a tool box and tools and mounting the box so the tools come out on the muffler side of the bike. I have no idea where the tool kit was originally and one needs a tool kit for removing the spark plug and adjusting the chain tension and general roadside repairs. Your vise is quite interesting too, never seen one like it. I'm going to lube up the axle shafts with grease to stave off corrosion when I get that far.
My brother had one of these as his first bike. We called it the "Tough Shit" 185. It blew up within 3 hours of owning it, and it had a huge hole in the headpipe, no brakes, handled like a pregnant whale, and the suspension was just for show. It was terrible. We loved it.
I'm willing to bet with a petcock and gas in the tank it would stay running longer, assuming there is no vent in that bottle you were using there would be a suction effect that would not let the fuel gravity feed like it should
Multiple heating and rapid cooling cycles (ice water or that super cold spray stuff, forget what its called), and pb blaster left to soak for a day or a few applications - likely would have freed that rear axle without damage.
Hello, I’m in the middle of restoring a 1981 TS185, all has been going well. I may have more questions for you down the road, but my first question is what air filter did you use? And could you possibly provide a link for it? My air box is completely missing and i don’t want to fork up for one
I just restored a 78 pe250 in a little better shape but I broke the rear brakes because I didn't notice that big bar in the back. The nut holding it on the hub was loose and fell out while I was riding then the hub moved and snapped the cable. Epic fail. Gotta love drum brakes.
Hello Mr Goldguy! i came across your'e channel a few days ago and have been watching nonstop. Gotta say this bike came out amazing, really good job! Just an idea, maybe you could show the man you bought the bike from how it turned out, he might really enjoy it! "Sorry if my English is a bit "rusty" im from Norway"
Great job man! Kind of hard to tell what is idle and what is with throttle but It seems to be idling high. Even though two strokes scream it should be pretty timid at an idle and more of a rumble as opposed to already screaming -it should be probably idling at half that rate. Because it is idling so high, on top of the revs, it basically wants to wheelie when you engage the clutch. I know there is no tachometer and as silly as it sounds "listen" to a few other youtube TS185 start ups for something to go off of. You are probably idling at 3000-4000 rpms and most bikes suggest 1200. Hopefully the running issue is more of the water bottle not flowing well as opposed to something else. Can't wait for more!
@@GoldGuyRides could be an airleak? Anywhere that goes to the combustion chamber. Old head gaskets, engine covers, seals, even crank seals. Could spray brake cleaner or fuel along places and see if the bike revs because of it to verify
oh my god i cant believe that you install that rear bearing. after you hit that pity rear axle. you should replace it i think. and you should put some grease on the new rear axle, so it can run smoother, and it will be so much easier to remove it next time ;) after this, just try to remove your rear axle, you will find some rust and it is hard to remove because you didnt put some grease on it LOL it such a great idea to put 2 rolls of tape to make the seat settled :D btw you have some big bike on your garage. what are them? #ACommentFromIndonesia
Hey i like yours videos i just Buy a ts 185 -2001, but don't start jet , i have the same problems, tank, carb,... This vídeo is to many help, i'm from sonora México,
So the tires are holding in the inner tubes. When cracked tire fails so dose inner tube. Worse case it wraps up in the axle and flips you off the bike. NO BUENO.
@@straightgoonin2308 When I place a 15mm socket on it hardly covers the edge but I am able to pull it back, but a 16mm covers it kind of loosely and I crank it all. I'm worried a 15mm will be too small to go over like the 13mm, but a 16mm might fit too loose and not tighten enough. What do you think?
What's up GOLD GANG?! I hope you guys enjoyed this video, I had a lot of fun riding it, I mean making it!
Big thanks to my Patrons:
Nikita Glybin
Matt Drui
Dominic Bowers
Hi mate ! i saw this video on TH-cam and i thought it might interest you since you are building motos and dont have an Motorcycle Hydraulic Lift Table :
th-cam.com/video/C-A2MS5YU_Q/w-d-xo.html
GoldGuy I’m a big fan I have subscribed to you I think I want to have a TH-cam channel like yours
Go back to buddy’s house with the bike and let him try it
Man, everytime that I see your videos I get jealous. I'm a Brazilian fan and I'm always showing your videos to my friends who like the idea of customize their motorcycles, but here is really hard to do that, there's a lot of burocracy and parts are really expensive or hard to find, but someday I hope that I'll be there building custom bikes and riding without caring about being robbed in each street signal that I stop. Btw nice video!
that's why i grease up my axles now. my xr200r is the same way but my swing arm lets the axle slide back. my tires are way worse 0 nobs and hard rotted😆
Using a sealed bottle as a fuel tank will create a vacuum as the fuel drains and starve the engine of fuel. If you poked a hole in the top of the bottle you could have road a few miles without a problem 👌
Just because the tires are dry rotten don’t mean it can’t hold air , the tube is what is good ...... but love the videos keep it upppppp
Well you rode it . Right on !. I bought a honda cm250c 1982 for 100 bucks. This bike kinda looks bad been in the guys back yard for a long time . Only has 16000 on it so i think the motor will be good. Missing some parts like shifter peddle , brake peddle, and the carburator. I am really excited to restore the bike as a tracker . Just wondering if you could help me along the way. This will be my first build. Where is a goodd place to get parts online........Thanks!
I really hope you changed the bearings... I wouldn't put old bearings in anymore.
You did it brother ,it sounds awesome ..like I said before in the last video.. this is going to be your best motorcycle .you should be very proud of yourself.
My dad has a 74 Suzuki 400 ts Apache that doesn’t run in the barn. I’m going to have to get it going. Love the 2 stroke sound.
You gotta get it running man!
Called him yesterday to see if I could buy it from him and he said he sold it last year 😱😱😱
Much respect. You do this with no fancy tools or even an air compressor!!
I have always called that bar the brake stay. Good job so far on the restoration.
Keep make this sort of projects it is so overwhelming and motivating
Neighbors must be thrilled😂
I was hoping you would upload soon and my desperation has been answered, this upload has saved my life.
I am glad to save your life man
'Holy sh*t! We have no brakes....!!!' Gold... Guy!
Good job! I'm fixin one up myself but it's in slightly better condition than yours was. Nice music too!
I just finished up making a tool box and tools and mounting the box so the tools come out on the
muffler side of the bike. I have no idea where the tool kit was originally and one needs a tool kit for
removing the spark plug and adjusting the chain tension and general roadside repairs. Your vise
is quite interesting too, never seen one like it. I'm going to lube up the axle shafts with grease to
stave off corrosion when I get that far.
Absolutely love that 2 stroke!!!
The bar that holds the rear brake drum to stop it turning is called a Torque Arm.
My brother had one of these as his first bike. We called it the "Tough Shit" 185. It blew up within 3 hours of owning it, and it had a huge hole in the headpipe, no brakes, handled like a pregnant whale, and the suspension was just for show. It was terrible.
We loved it.
It’s good you took it off full restoration
Yehaw! So much fun getting a project bike up and running and out on the road (even if it's for a quick test ride)
Hell yes it is!
I'm willing to bet with a petcock and gas in the tank it would stay running longer, assuming there is no vent in that bottle you were using there would be a suction effect that would not let the fuel gravity feed like it should
That was so sketchy! But loved the video and can’t wait to see more. Remember safety first!
A better way to check the wheel bearings is to wiggle the wheel from side to side, if it wiggles its bad. Thats how i found out that mine were bad.
Multiple heating and rapid cooling cycles (ice water or that super cold spray stuff, forget what its called), and pb blaster left to soak for a day or a few applications - likely would have freed that rear axle without damage.
Awesome job man! 👍🏻 Now it’s all about tuning, tweaking, and transforming.
Thanks Gary! Your damn right, I'm getting excited!
Great videos dude. Keep up the solid work 👍🏻
Hello, I’m in the middle of restoring a 1981 TS185, all has been going well. I may have more questions for you down the road, but my first question is what air filter did you use? And could you possibly provide a link for it? My air box is completely missing and i don’t want to fork up for one
I just restored a 78 pe250 in a little better shape but I broke the rear brakes because I didn't notice that big bar in the back. The nut holding it on the hub was loose and fell out while I was riding then the hub moved and snapped the cable. Epic fail. Gotta love drum brakes.
We are loving this build in England dude . 👍
change the bearings for security!! this is an amazing proyect.
I definitely will change them!
Hello Mr Goldguy! i came across your'e channel a few days ago and have been watching nonstop.
Gotta say this bike came out amazing, really good job! Just an idea, maybe you could show the man you bought the bike from how it turned out, he might really enjoy it!
"Sorry if my English is a bit "rusty" im from Norway"
I love these videos man, keep them coming!
"Guess I'm gonna keep hitting it with this hammer and see what happens" Been there man, been there.
That bar on the back brake to the frame is called a brake stay
Bro! I have been waiting for this!
So sick! I love the sound of the 185
Me too man, I'm not sure if my neighbors do though lol. I definitely wanna get a muffler for it
Hell yeah you got it going you the man
Check the compression and change the reeds maybe?
You can go to your local sewing shop and get some materials that are very good to recover a seat for about $10
Or go to salvage yard and get a old seat from a truck and cut off some materials or another larger bike seat
Great job Keep those good videos going
Great work GoldGuy
I really like what you are doing, I'm on a cafe racer project at the moment, I hope it turns out good!
Best of luck!
Brake stay is what I call it. Love the videos! Ever tried PB blaster on some of that crusty stuff?
Great job man! Kind of hard to tell what is idle and what is with throttle but It seems to be idling high. Even though two strokes scream it should be pretty timid at an idle and more of a rumble as opposed to already screaming -it should be probably idling at half that rate. Because it is idling so high, on top of the revs, it basically wants to wheelie when you engage the clutch. I know there is no tachometer and as silly as it sounds "listen" to a few other youtube TS185 start ups for something to go off of. You are probably idling at 3000-4000 rpms and most bikes suggest 1200.
Hopefully the running issue is more of the water bottle not flowing well as opposed to something else. Can't wait for more!
Yeah something is definitely wrong with the idle, I'll get it sorted out!
@@GoldGuyRides could be an airleak? Anywhere that goes to the combustion chamber. Old head gaskets, engine covers, seals, even crank seals. Could spray brake cleaner or fuel along places and see if the bike revs because of it to verify
It is alive !!!!!!!
I enjoy watching these because you're bad at it
Your pulling gas out of that little bottle and it doesn't have a vent hole cut into it
“there’s probably spiders and mice living inside these tires”
Like your videos kid ! A light coating of grease on your axles and they will not lock up next time.
Yep, I'm gonna grease the shit out of the axles whenever I put it back together for good. Especially after the fight that I had with this one.
So hilarious ! I laughed a lot .
vapor lock off the bottle? prob run fine!
lol sweet music!
oh my god i cant believe that you install that rear bearing. after you hit that pity rear axle. you should replace it i think.
and you should put some grease on the new rear axle, so it can run smoother, and it will be so much easier to remove it next time ;)
after this, just try to remove your rear axle, you will find some rust and it is hard to remove because you didnt put some grease on it LOL
it such a great idea to put 2 rolls of tape to make the seat settled :D
btw you have some big bike on your garage. what are them?
#ACommentFromIndonesia
Love your videos dude.
Where is the fully restored video man??
Hey i like yours videos i just Buy a ts 185 -2001, but don't start jet , i have the same problems, tank, carb,... This vídeo is to many help, i'm from sonora México,
Brake torsion bar bro!!!!
I remember my first 74 ts185 I got in 1998
Dose that bike have a power band?
The reason it is wide open is because you aren't mixing enough oil in gas and straight gas in a 2 stroke will race up and out of control
Heat up the axle bushings with a torch...
Don't know if its got a tube or not lol. Its a spoked wheel from the 70's of course its got a tube lol.
Go back to the guy you got it from and let him ride it lol
You know there are tubes inside those cracked tires right?
Yeah I figured there were but still, I didn't think the tubes would hold air because of how the tires looked.
So the tires are holding in the inner tubes. When cracked tire fails so dose inner tube. Worse case it wraps up in the axle and flips you off the bike. NO BUENO.
I feel like that bar on the drum brake is called a stay bar, however i could be wrong
I think you are right about that one. Thanks!
Sway bar
19:35 how did you stop the bike while goind downhill and you had to turn to the left ? LOL
Maybe engine braking
@@zipsyyy8120 no gas
look carefully to on top of the fuel tank
Hey goldguy i just saw the movie AXL you look just like the guy in the movie whit the robotic dog
What size is the kickstarter hole?? I have the same bike and am trying to restore it and ordered a 13mm Kickstarter but it was too small:(
Gabriel S I think it is a 15mm
@@straightgoonin2308 When I place a 15mm socket on it hardly covers the edge but I am able to pull it back, but a 16mm covers it kind of loosely and I crank it all. I'm worried a 15mm will be too small to go over like the 13mm, but a 16mm might fit too loose and not tighten enough. What do you think?
Gabriel S I don’t know I’ve never really had to do that specific piece to anybike I’d just keep trying different sockets
What do you think the next project will be?
I really have no idea. But I'm open to suggestions!
Front fender is backwards bro
Tee shirt makes a Good Seat cover
Think the throttle wasn't stuck thinking it was too much starting fluid lol
Good video can't believe its running
Yeah I think that's it. It's like running it on jet fuel lol
Lube the chainn
"Brake 'torque bar" :)
You need to make it street legal
Lol at 9:39 he said if there's a tube if it didn't have a tube it wouldn't have a valve
at 9:39 he didn't say anything
Yo! That helmet is dope! What is that?
It is a fly trekker with the visor removed and a blue mirror shield. Thanks man!
@@GoldGuyRidesThanks bro! Appreciated!
15:58 NO... YOU NEED ELECTRICAL TAPE!!!
Sweet
You haven't used my dad's double sided ax
You look like grant from College Humor.
Oh my God I don’t know if you have enough gear to gear up to ride at animal
when the next video appears ?
Friday!!
juust waite untill you can take it for a ripp !! then youll fell 2 stroke power!!
The neighborhood must sit in there chairs polishing there baseball bats when the time comes for payback for causing so more noise
That's why I have an episode of me making a muffler for this bike 😂😂😂
Ha ha nice come back i have few Bultacos and building a pursang love the sound of the engines.
I wanted to be the 100th comment but this is sick
Ok
polishing a turd
HAHAAHAHAHAHAHAHAHAHAHAHAHAHAHA
I really hope ur joking about the wheels, u know that there are fucking tubes inside...
I CAN'T BELIEVE I'M NOT THE FIRST VIEWER!
You failed me! Ahaha just kidding man, thanks for liking my videos!
Axel_Sniper Garage.
Windows problem sound
Just leave the pads out.
😑😑😑wrong handle on the wrong side
bloke you need to get yourself a soft faced mallet
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeekkkkk