Just a tip to home fabricators just now coming across this DIY video (11/24) : If that is EMT tubing, welding on it without first removing the galvanizing it can be dangerous to the lungs (google it). That grayish haze deposit next to the welds suggests (to me) that is was not removed before welding.
Just picked up a nice 1977 TS100 that has less than a thousand miles for $200 and it doesn’t have a muffler. First video I found for building a muffler was this😂. Just cleaned out tank and carb and drove around and realized my neighbors are going to kill me if I don’t do something. Awesome work on this. I may do this but I probably will take the less time consuming route of fitting a 80 or 85cc stock muffler that somebody wants to get rid of.
You know I've been trying to restore my FMF power core silencer for my quad because I can't afford to buy a $200 silencer at the moment and I have to say that your idea is genius The can on my pipe is dented to s*** and bent so I'm going to use your idea That's great!!!
Love this build series I have a 1979 pe175 just sitting in my backyard and don’t know weather to sell it or build it up like your doing. It’s about as rough as your bike was when you first bought it. Plastic tank makes life much easier tho and it’s all there. Great work keep it up!
Black and gold is awesome and I feel you made a very good decision to keep the gold off the engine. I think it would've really had a negative impact on the overall look. Unfortunately, on my 70 yamaha ht1 the header was completely rusted out so I had to get the damn exhaust. Luckily, they are relatively cheap on ebay.
Can you test the exhaust sound with and with out the muffler? I’m stoked on the build 🤘🏼 great job fixing or making the old stuff work rather than just buying new and replacing.
@@GoldGuyRides Haha, if you have a local harbor freight they are cheap and they work great. i did my whole kx100 frame with them, with the exception of a few tight areas.
Great Vid and thanks for putting the songs used in the description. You find some really nice music. Keep up the good work and cant wait to see the finished bike.
On another subject, i seem to have a small amount of rust in my tank, i think i'm gona go with vinegar cleaning but i dint know how to prevent it from rust because i dont feel like it would need POR15 ¿any advice?
Okay I'm about to sound like a dad right now ,but.. I'm very proud of you young man.
this was absolutely amazing, thank you so much for keeping up the good content
Thank you so much man!!!
Just a tip to home fabricators just now coming across this DIY video (11/24) :
If that is EMT tubing, welding on it without first removing the galvanizing it can be dangerous to the lungs (google it).
That grayish haze deposit next to the welds suggests (to me) that is was not removed before welding.
Just picked up a nice 1977 TS100 that has less than a thousand miles for $200 and it doesn’t have a muffler. First video I found for building a muffler was this😂.
Just cleaned out tank and carb and drove around and realized my neighbors are going to kill me if I don’t do something. Awesome work on this. I may do this but I probably will take the less time consuming route of fitting a 80 or 85cc stock muffler that somebody wants to get rid of.
You know I've been trying to restore my FMF power core silencer for my quad because I can't afford to buy a $200 silencer at the moment and I have to say that your idea is genius The can on my pipe is dented to s*** and bent so I'm going to use your idea That's great!!!
Love this build series I have a 1979 pe175 just sitting in my backyard and don’t know weather to sell it or build it up like your doing. It’s about as rough as your bike was when you first bought it. Plastic tank makes life much easier tho and it’s all there. Great work keep it up!
Restoring a ts185. Love your vids. Thanks!
wow ;O dude I'm really surprised how amazing that turned out!
I'm glad I found your channel in my recommended
Great job mate looking fab
Thanks!
Very good work but a suggestion in the beginning to prevent twist off is try heat from a propane torch or map gas torch
cracking bit of craftsmanship there
Super awesome. Always satisfying making your own parts. Well done 👍
restoring a ts185er ‘88 I bought for $400 off some farmer love the mufler might try myself
Way to go! I’m impressed with how nicely you made the muffler. Enjoying the videos, Keep up the great work!
Thanks!!
Good job bro!
Awesome job with the fabrication work with the muffler. Looking forward to your future projects.
Omg wtf FTW I love the red white and blue bike, can you show..?! It would be sooo awesome with straight handle bars..!!!
I am amaized by your skill man, u have a great skill set!! Inspiring
That muffler looks great👍
Man, you are one talented dude. Where on earth did you acquire all of this knowledge??
his fathers balls sir
Nice job man.
Great, people can rebuild i bike without a ton og money.
impressive makeshift muffler !
looks original.
good welding skills.
awsome video !!
Black and gold is awesome and I feel you made a very good decision to keep the gold off the engine. I think it would've really had a negative impact on the overall look. Unfortunately, on my 70 yamaha ht1 the header was completely rusted out so I had to get the damn exhaust. Luckily, they are relatively cheap on ebay.
Can you test the exhaust sound with and with out the muffler? I’m stoked on the build 🤘🏼 great job fixing or making the old stuff work rather than just buying new and replacing.
Oh yeah I definitely will do that whenever I get the bike all put back together! Stay tuned man
Dude, that is bad ass! Great job!
Great episode! Keep up the great content!
Nice one bro!👍
That looks great!!
Your great keep up the great work!
Thank you!
Great work man keep it up
I think both bikes should be cafe racers lol that be sweet!
Finally hit 28k!
Nice job. Thanks for a new video.
I think it would be cool to see you work on a 80s Honda cr. I love those bikes.
Yess that would be awesome! Whenever this one is done, I'm gonna start watching Craigslist for one!
GoldGuy Awesome!
Nice Popcorn
Nice man! ✌
LOVE THE SUBARU
Great video and great build!
You should get a polycarbide abrasive wheel. Takes everything off very well.
If it works better than a wire wheel than hell yeah I'll take 20 😂😂
@@GoldGuyRides Haha, if you have a local harbor freight they are cheap and they work great. i did my whole kx100 frame with them, with the exception of a few tight areas.
very smart option!
Very impressive
Nice work dude! Cute dog btw lol
Amazing work brother. What was the diameter of the larger pipe?
Still the man
Love it👌
Great vid 👍
I see that you listen to Igor Presnyakov alot
I wonder what those Amish in Lancaster would do if you rode by there😂
Great Vid and thanks for putting the songs used in the description. You find some really nice music. Keep up the good work and cant wait to see the finished bike.
great job!!
cute dog
Cute little doge
The Gold Dog hahahah
GOO BACK TO YOUR SUBARU ITS BEEN HELPING ME SO MUCH!!!
Can i make it with alluminium instead of steel? Or it Will be too weak
On another subject, i seem to have a small amount of rust in my tank, i think i'm gona go with vinegar cleaning but i dint know how to prevent it from rust because i dont feel like it would need POR15 ¿any advice?
@@snowyowlgaming359 thank you!!!
I wait for this
Nice
Thanks Luke!
Those Exhaust Covers look awesome man!! Are you gonna be making your own Side Covers for the TS185?
Well I already have one of the side overs and it's in good shape so I'll probably just buy one!
Should have kept the pipe chrome👍🏻
Hi bro
I have 2 stroke suzuki Max 100 bike exhaust muffler is so very please give any idea
Smart...
A little late but maybe try some rust converter instead of just scraping everything down
What's the point of using the 2t packing?
To soak up the sound and make my exhaust quiter
Because he can’t have noise complaints from jealous people.
At the start he said ts 125 instead of 185😂😂😂
Word of freindly advice you should never wear gloves when using a bench grinder.
#500 like
Song result
Please subtitles in spanish
Bro im 1e and can weld better than that