Good vid. Combo of cleaning with isopropyl, light dusting of hairspray just before print, bed set to 70 on first layer and increased speed to 110% seems to be working. Thank you
i was just about to give up and sell the 3d printer i got yesterday because nothing worked but i tried the slowing the first layer like you said and it worked perfectly thank you.
One of my pla spool suddenly stopped sticking to the bed. I tried everything for 2 days without any results. Then I simply switched spool and this one sticks perfectly. So what do you think append to the oter pla spool all of a sudden?
Hi sorry for the late reply. Did you leave the failing spool in open environment. I guess maybe the spool is being contaminated by dust. Just our guessing. It is always advisable to keep the filament sealed once finish printing as it can prevent other failures like moisture and brittle of the filament. Hope it helps. 🙂
i heat bed to 80, put a layer of hot melt glue on bed...then turn off heat all-together, wait till it hits under 40 then print...with cold bed cura bed set to 0...when you have finished print heat up again to 80 then remove...simple..
![[Lithophane tips] 10 Things I Wish I Knew Before Making Lithophane - 3D Printing](/img/n.gif)
Good vid. Combo of cleaning with isopropyl, light dusting of hairspray just before print, bed set to 70 on first layer and increased speed to 110% seems to be working. Thank you
i thank you for the tips, they have really made a difference in my prints.
Thanks for enjoying the video too😊
i was just about to give up and sell the 3d printer i got yesterday because nothing worked but i tried the slowing the first layer like you said and it worked perfectly thank you.
Excellent video dude!
thank you
New subscriber ❤️❤️❤️ love u bro all of ur videos are very very useful for beginners I'm support u bro 👍👍👍
Thank you Uncle Roger!
Haiyaa...
Where do I get that PEI shit tho 7:41
One of my pla spool suddenly stopped sticking to the bed. I tried everything for 2 days without any results. Then I simply switched spool and this one sticks perfectly. So what do you think append to the oter pla spool all of a sudden?
Hi sorry for the late reply. Did you leave the failing spool in open environment. I guess maybe the spool is being contaminated by dust. Just our guessing. It is always advisable to keep the filament sealed once finish printing as it can prevent other failures like moisture and brittle of the filament. Hope it helps. 🙂
might be wet filament
i heat bed to 80, put a layer of hot melt glue on bed...then turn off heat all-together, wait till it hits under 40 then print...with cold bed cura bed set to 0...when you have finished print heat up again to 80 then remove...simple..
It's a great idea. Thanks for sharing 😊
@@gravity-less3dprinting624thanks,
no-problem..
@@ellpiece does that work for it to stick?
@@botzaca0023 yes the heated plastic fuses together...try it..
What is a PEI shit?
:D
Yeah he definitely said SHIT every time. But he knows two languages. English and something else. Which is 2 more than most Americans.