วีดีโอ

Lithophane setting ?

Nice video man

amazeballs

With the sd card, the slower speed fixed it, gotta try the usb mode to see if that helps it while maintaining the speed

Say hello to my litho phane!

A mask I was making shifted a full 10mm and then finished printing flawlessly.

For shapes like circles and hearts you most definitely will need strong supports if printing vertically. Ask me how I know!

I have a coreXY :) but found the tip about printing along Y particularly smart and valuable for who has an Ender3 or like most printers out there!

Excellent tips and overview! Thanks!

You are a life saver! Thank you!

Instead of a raft I often use a brim. Works for me

"Promosm"

How to print skinny parts? print slow!

This is by far the most informative video not only on Lithophanes, but general 3D issues that I’ve seen. Thanks so much for sharing this. You earned my sub.

thanks this was lots of help

Superb video. Thank You 🙏

Great Lessons! Exactly the right amount of Facts and explainations 😊 Awesome Video! Will definetely try out some of your tipps 😊😊

Thank you so much!

You just helped me a lot

Thank you for making this video. I was about to start my first one and was about to make a few mistakes. Just in time for Mother’s Day!

This is actually GodLike content, thank you so much. I have been struggling with a tiny curvy keychain, failed 18 times already but not yet given up.

Outstanding Sir!

Thanks alot my friend...I am having this same problem. I will try your best solution along with a solution from another viewer, which is to print two objects side by side, giving more cooling time between layers!

Nice information..

Nice information..

No sound Feb 23

Good experiments shared 💕thanks bro

Thanks for this video. I been wrestling with this problem and this helped a lot.

I had the same problem but i resolved it by printing 2 same screws with a bit space between each other, great video btw !!

My ender 3v2 started over struding out of nowhere, previous prints cane just perfect and suddenly after on print it began overstrudding, any ideas guys?!

Great video thanks!

Does that work with petg? Does petg layer adhesion need the previous layer still warm or does it just depend on how quickly we cool the current layer?

Thank you. I’m hoping to print some lithophanes before christmas

Great video, cant wait to try some of these tips.

Add the line of text "M413 S0" to the beginning of your gcode file. It will disable power loss recovery and solve this issue.

Thanks, good tips for 3d printing in general 👍

The ones I have printed flat have actually printed pretty well but everytime I try to do one vertically it fails, it gets like 20% or so and then messes up everytime. Any suggestions for me?

I love little fin

Very underrated video but has heaps of very useful info! Must watch for new comers

thank you so much !!!

What is a PEI shit?

Where to change the minimum thickness??

Turn off Power safty in advance settings from the Ender3 board

I solved my problem of poor dimensional accuracy and over extrusion on the top layers by setting different flow multipliers for the walls and top layer. in my case I changed the wall flow rate until it matched the wall thickness I had set (used calipers to measure the printed wall calibration box). then I used a lower flow value for the top layer to avoid over extrusion, you would do the opposite if there's gaps between the lines

Very informative video, thank you for taking the time to film and upload it.

I just want to say this video was excellent! I wish more support videos were as concise, well illustrated and thorough as this video! I feel this should have many more views than it does!

Where do I get that PEI shit tho 7:41

Good vid. Combo of cleaning with isopropyl, light dusting of hairspray just before print, bed set to 70 on first layer and increased speed to 110% seems to be working. Thank you

What happens if your filament is New and dry and it still make your parts brittle.

💕🔥👍