Brilliant and informative video. Just bought my 2015 F6C and although quite rare here in the UK its great to see these video's from across the pond. Thank you :)
AWESOME VIDEO. On the 2015 I also had to release the two pin-clips that hold the black plastic cover that is ABOVE the cowling. I could not get the top edge of the cowling to release otherwise and was afraid I would not be able to get it back after I did. The video was a perfect installation otherwise and I am EXTREMELY happy with the results.
The video is wrong! The spacer only goes behind the inner bolt to take up space of the plastic guard that the other two go through. I’m sure this has messed up everyone following the video
In your video it shows to tape off the two yellow wires, is this the two yellow wires that you connect the admore wiring harness to that needs to be added on with the lights
Bought my f6c two days ago. My lid wont shut, must be a cable or return spring issue. I think there is a spring on either end of cable one on key and one on latch. A few 5mm hex screws to remove for inspection.
Honda did make fog/driving lights for the Valkyrie (same ones for the Gen 5 Gold Wing), but you would have to buy those OEM ones or ones from an aftermarket vendor like shown in this video. The OEM lights are circular and do not have the nice rectangular fit like Pathfinder or other aftermarket lights.
@ACH that other connector IS there on the left side. it is just buried underneath some cables. I had the same fear until I discovered it. I have a 2015.
On the 2015 I also had to release the two pin-clips that hold the black plastic cover that is ABOVE the cowling. I could not get the top edge of the cowling to release otherwise and was afraid I would not be able to get it back after I did. The video was a perfect installation otherwise and I am EXTREMELY happy with the results.
![[LIVE] : ONE ลุมพินี 73 | คู่เอก "วรพล vs พันฤทธิ์"](http://i.ytimg.com/vi/rrOljlqse3A/mqdefault.jpg)
just bought a new Valkyrie and this will be my 1st aftermarket purchase for my new toy, excellent video, thx for sharing.
join the GL1800 group, VRCC group and VOC on facebook.
Brilliant and informative video. Just bought my 2015 F6C and although quite rare here in the UK its great to see these video's from across the pond. Thank you :)
Thank you for this video. Worked perfect!
AWESOME VIDEO. On the 2015 I also had to release the two pin-clips that hold the black plastic cover that is ABOVE the cowling. I could not get the top edge of the cowling to release otherwise and was afraid I would not be able to get it back after I did. The video was a perfect installation otherwise and I am EXTREMELY happy with the results.
Very nicely done!
Nice video and lights
Mine are on, and with the LED running/turning lights are sweet. A little scary jumpering into the wiring harness, but everything turned out good.
Also, any chance you have a video on how to adjust the headlight on these?
There seems to be a big gap between the fog light and the cowl? 12:58
Nice video with great instrutions!
That is actually quite common with most driving light kits
Some of his instructions on installing spacers on the RIGHT SIDE , doesn't make sense, but i figured it out anyway......
The video is wrong! The spacer only goes behind the inner bolt to take up space of the plastic guard that the other two go through. I’m sure this has messed up everyone following the video
In your video it shows to tape off the two yellow wires, is this the two yellow wires that you connect the admore wiring harness to that needs to be added on with the lights
Just finished my install.... Yes, those two yellow wires control the turn signal l.e.d.s
You connect those to the " ADD MORE " module.
just installed them, they work great but too bad the turn signal interface is not applicable to the valkyrie :(
If fitted with the Admore adapter, which the company brought out after this video, you will be able to use the blinker function on the Valkyries.
Is there a way to ensure that the yellow light is operated as the daytime running light?
Yes, connect the whites to grounds , connect the yellows to a 12v + , power source.
On my 2014 Valkryie, the gas lid won't open when I turn the key, any tips on how to get this fixed?
Clifford, sorry, but I don't have a clue!
Bought my f6c two days ago.
My lid wont shut, must be a cable or return spring issue. I think there is a spring on either end of cable one on key and one on latch. A few 5mm hex screws to remove for inspection.
Do driving lights come for the Valkerie? My head light is not very bright
Honda did make fog/driving lights for the Valkyrie (same ones for the Gen 5 Gold Wing), but you would have to buy those OEM ones or ones from an aftermarket vendor like shown in this video. The OEM lights are circular and do not have the nice rectangular fit like Pathfinder or other aftermarket lights.
I have a 2014 Valkryie and on the left side of my bike there is rubber boot and no gray connector to plug the light into...help please, thanks.
I have a 2015. it IS there. It is just buried behind some cables.
@ACH that other connector IS there on the left side. it is just buried underneath some cables. I had the same fear until I discovered it. I have a 2015.
On the 2015 I also had to release the two pin-clips that hold the black plastic cover that is ABOVE the cowling. I could not get the top edge of the cowling to release otherwise and was afraid I would not be able to get it back after I did. The video was a perfect installation otherwise and I am EXTREMELY happy with the results.
I saw Valkirie working turn signal.what is the way to this?
After purchasing the fog lights, you would need to add the "ADMORE ADAPTER", see here
www.socalmotogear.com/product-p/a-gl18rfl.htm
Also guys, if you are tapping into a positive/ hot wire , don't use a green wire .....use "RED". It's an indicator that THAT wire , is a "hot" one .
Are the amber blinker halos working?
If fitted with the Admore adapter, which the company brought out after this video, you will be able to use the blinker function on the Valkyries.
Does it work with turn signals?
If fitted with the Admore adapter, which the company brought out after this video, you will be able to use the blinker function on the Valkyries.