Accord 2019:No start and No communication with the engine bay control units (always use wiring diag)
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- I did not use any wiring diagram when I was fixing the vehicle and it took me more hours to complete the repairs. that is why I recommend the use of wiring diagram to help make work easier but in my country you can't get some information on new vehicle like the wiring diagram.
My dear you are doing very well, and this is what a lot of people run from doing(tracing to find the actual problem and fix it)
I give you 100℅
Thanks boss
I have a 2018 accord that is not communicating with the srs unit, and other modules. After i opened the srs unit, one of the chips was bad. I bought a used one from ebay but i still dont have communicstion with the module. I get code u0151 can you pleae help?
In what module
In what module
Please sir, I am having problem with my 2011 Honda accord with no start condition. With trouble code U0100. Gauge control lost communication with the pcm. The car will not shift from park and the PRND indictor will not show on the dashboard. Please I need your help
What have you check , is the PCM communicating with the scan tool
I have the same issue, its almost brand new , scanner not commuincating with ABS module and pcm.... car is not starting it had small crash that resulted two air bags that i bought new and also srs modular... after that accident all air bags and modular problem solve but car is not starting and displaying same issue that u posted in your vdo.. can you guide please..
You have to check the system and know why does modules are not communicating
@ADDAUTOMOBILESERVICES which system should look into, can you explain please? A guy came with autel scanner he said you have to change your ABS modular... but I don't think so as the vehicle is very new
My Honda Accord 2013 have U0122, car jerks on movement. Kindly advice.
Pls in what module do you get that code
U0122 is Lost Communication with Vehicle Dynamics Control Module
Scan all the system and check your engine
Im having the same problem as you except they we're testing the ac pressure switch and sent power down the power wire of the ac pressure swicth with automatically shut off the car and lost communication with the ecm pcu and the car wont start
Are you able to scan the ecm
@@ADDAUTOMOBILESERVICES no i am not able to scan it i plug in my maxflex by matco and it tells me error no communication the car wont start and i have all the same messages as you did in your video
@@user-lh1hd5iw7h pls take out the PCM socket out and use the vin to scan the vehicle
White light which is blinking in dashboard what this coming for what this light called
It is the transmission range position light check you Air bag system
Any experience with U128F Code fix? Right BSI Radar lost communication to Left BSI Radar. Honda Accord Hybrid 2018
No but check the wiring from BSI left to right
Where location to gateway ECU honda accord 2020 and i have one problem accord 2020 that blinking security light and make start the little bit cranking but start how to fix the problem
What are the fault codes when you scan it with a scan tool
@@ADDAUTOMOBILESERVICES i scan the car DTC .U0128 and U0122 this type of DTC come please help me and please give me your whatsapp
Ok
+233246312303
Please which wiring schematic software do you use?
Pls Did not use any wiring diagram
I mean wiring diagram would have make the work easier
I have the same problem, what should I do?
Scan it for fault code
amigo mi 2018 Honda accord tiene problema prendia y ahora nomas prende el tablero todo , pero no enciende o estarea
pls have you try scanning the vehicle
Bcm bad
Disculpe, me esta pasando lo mismo. Encontro el problema? Gracias de antemano
Tengo el mismo problema con un accord 2019
No indica posición P
Y no star motor
Plis Help
¿Cuáles son los códigos de avería?
@@ADDAUTOMOBILESERVICES
Nos podemos contactar por WhatsApp??
00233246312303
I can't turn on my car on the on position because car won't recognize the key I tried programming new key won't let me
Pls have you scan the vehicle and what it the fault code
👌👌👌👌
👍
I have a 2018 accord was stolen and now i cant program a key becuz it says immobilizer not normal, how can i fix that to program my key
Check the system fault code
Hello i have U0100 & U0115 its a 2019 2.0 accord. Where would i even start? I have no idea
In what unit is the code in
Im not sure what that means, but i scaned my obd2 with a scanner I bought off amazon. It read the code under “permanent codes” in the “A/T” section. The “Engine” section had no codes
The problem is in the A/T and have you change the transmission or the transmission control module
@@ADDAUTOMOBILESERVICES no the transmission is stock & haven’t even changed the oil in it, was going to do so next week.
@@ADDAUTOMOBILESERVICES would you recommend i check the transmission control module?
I have 2.0T 10 speed / starts but cant move selection from P- i scan it &got code U0129
What work did you do on it
Bro a small white light blinking what is for?
Red or white
White
Which is blinking
Please reply
Ok
I have a problem with the immobilizer scanner said nimmobilizer not normal
What are the fault code
The car was in a crash and I have many codes u0151 u0038 u0104 u0104-00 u0401-68 u0102-68 p0864
Else the transmission gear indicator not working
You have to scan all the system
Ok but I don’t have any working key and I need Turn on and off the switch how can I do it?
Bro do you have any one who work in dubai i need to make my car right as i am getting same proble
No