Adding Accessories To My 2024 Honda Goldwing Tour DCT | Cruiseman's Garage
ฝัง
- เผยแพร่เมื่อ 17 พ.ค. 2024
- It is time to start adding all of my favorite accessories to my brand new 2024 Honda Goldwing Tour.
EMBER HEATED COFFEE TUMBLER: amzn.to/4awtMDI
▽ GOLDWING MAINTENANCE VIDEOS: cruisemansgarage.com
▽ CRUISEMAN'S AMAZON STORE: amazon.cruisemansgarage.com
▽ CRUISEMAN'S MERCH STORE: shop.cruisemansgarage.com
Cruiseman's Social Media:
Facebook: / cruisemansgarage
Rumble: rumble.com/cruisemansgarage
Goldwing Maintenance Support 2018-2022 Goldwing:
/ 6gengoldwingmaint
Goldwing Maintenance Support 2001-2017 Goldwing/F6B:
Facebook: / goldwingmaintenance
Instagram: / cruisemansgarage
Website: cruisemansgarage.com
Email: info@cruisemansgarage.com
SOME FAVORITE TOOLS:
◆ Surgical Hemostats: amzn.to/3m9FWPO
◆ IRWIN VISE-GRIP Wire Stripper: amzn.to/3m9G0z2
◆ Vessel Megadora JIS Screwdriver: amzn.to/3UifsZg
◆ Fanttik X8 Apex Portable Tire Inflator: shrsl.com/3do96
◆ TCMT Low-Profile Oil Drain Pan: shrsl.com/3twdr
◆ Traxion Rolling Garage Seat: amzn.to/3zChhGI
◆ Big Red Scissor Jack: amzn.to/3m4hLm4
PRODUCTS I USE TO MAKE MY VIDEOS:
STUDIO EQUIPMENT:
◆ Sony A7S III (studio camera): bit.ly/CGCamera
◆ Sony 24-105mm F4.0 G Lens (studio lens): amzn.to/3FA6y0R
◆ Apple iPhone 15 Pro
◆ Apple MacBook Pro M1 Pro 16"
◆ Peak Design Tripod: amzn.to/3DvPKr6
◆ Godox VL-150 Studio Light: bit.ly/CGStudioLight
◆ Angler Boombox Softbox: bit.ly/CGAnglerBoomBox
◆ Rode Wireless Go II Wireless Microphones: amzn.to/3mzMe8m
◆ Rode Wireless Go Lavalier Microphone: bit.ly/CGRodeGoMic
◆ Ulanzi Claw Quick-Connect Camera Mount: bit.ly/CGUlanziStudio
◆ Video Lights (used for maintenance videos): amzn.to/2zVooyM
◆ Ultra-Thin Studio Light: amzn.to/2CsfNVa
MOTOVLOG GEAR:
◆ Insta360 X3: bit.ly/CGInsta360X3
◆ Insta360 Ace Pro: bit.ly/CGAcePro
◆ Insta360 GO 3: bit.ly/CGInsta360GO3
◆ GoPro Hero 10 Black: amzn.to/2ZODxP3
◆ Purple Panda Lavalier Mic: amzn.to/3hNTPMJ
◆ SureWo Helmet Swivel: amzn.to/2ARoacF
MOTOVLOG GEAR (Handlebar):
◆ RAM Reservoir Mount: amzn.to/313M7bk
◆ RAM BALL ¼" 20 mount: amzn.to/38VHcMY
◆ Ulanzi Claw GoPro Mount: bit.ly/CGUlanziGoPro
◆ 360 Degree GoPro Mount: amzn.to/3fOQhb5
Cruiseman's Garage is a video production company that specializes in motorcycle maintenance videos, motorcycle review videos, and accessory installation and review videos. Our maintenance video series for the Honda Goldwing is in use by thousands of Goldwing owners in more than 33 countries worldwide. For more information on Cruiseman's maintenance videos for the 2001 to 2018+ Honda Goldwing, go to cruisemansgarage.com
For sponsorship, product reviews, and collaboration, you can email me here:
info@cruisemansgarage.com
Affiliate disclaimer: Some of these links go to one of my websites and some are affiliate links such as Amazon and B&H where I'll earn a small commission if you make a purchase at no additional cost to you.
Background music under license from Epidemic Sound
Opening voiceover by Don Smith at: www.fiverr.com/share/V3a6Dz
Cruiseman's Media Kit: www.cruisemansgarage.com/medi...
#cruiseman
#cruisemansgarage
#hondagoldwing - ยานยนต์และพาหนะ
Mandatory first mod. Take that white sticker off your fuel door.
It was great meeting you in Tennessee thank God you made it home safely
Congratulations Cruiseman on your new bike, WooHooo I know the feeling all too well....Javi G.
Greetings from Mass. Just took delivery on a 2023 tour dct .with 850 miles on it after 10 years on my 2014 wing . Been watching your videos for the past year and decided to upgrade. Appreciate learning how to prioritize in an affordable way; especially product reviews. Gary
When removing the center engine cover behind the front wheel I think only the top two 5mm allen bolts need to be removed, not the bottom two.
Just put the same engine guard on the same exact bike last week. Its such a nicer looking color combo in person, especially with the metallic pearl in the white. I wish the black contained some metallic as well.
I am kind of surprised that the Traxxion belly pan wasn't added before you left Tennesse. I guess that is one of the accessories you're waiting on.
Congratulations again. With the added accessories you are making it yours!
Thank you very much!
That's a beautiful color scheme. Nice choice.
here we go... :)
Congratulations cruise man on your new ride enjoy it.
Thanks! Will do!
Would love to see a video install of a newer Zumo XT or XT2 if you add this to the new bike. Thanks for the video today and congrats on the new bike.
Coming soon!
Thanks I got the 2024 Tour and i will be watching your upgrades
Maybe I missed this in the comments, but you could you share your main motivations for trading your 2018 for the 2024 ? With all the cool accesories you added to the 2018, and the way you meticulously maintained it, the fact that you traded just made me curious.
Watch my next Crown and Comments!
Let’s go! Fantastic! Thank you!
Thank you. Again, congrats on the new bike.
Congrats on your 2024 Goldwing.I bought the same combo last December 9 and have over 11.000 smiles on Pearl.Looking forward to seeing your video on installing your accessories.
Congratulations on your second 2018 Gold Wing. Looks just like the first
Excatly. No change on GW since forever.
I’m with you on the lower cal tab. I had to straighten out the dash on my GL1500 where someone had been in it. Once I put the plastics and tabs together properly it illuminated the rattles I was hearing from it while riding!
OBTW, I love the tunes! Must be a generational thing! Stay the line!
Great job as always!!!!!1
Cruise-Great to see you start the accessory install of all the goodies. Good stuff!
More to come!
I have a 2024 as well, grey and black 😉👍 and I found the front and rear screws for my lower cals/ covers 🤷🏼 loose from the dealer when I installed my Custom Chrome highway foot boards. This is my first Goldwing and I’m loving it. It’s a DCT by the way. Thanks for the video.
I also wanted to congratulate you on your new bike it's the best feeling in the world I am a little surprised you pulled the plug I thought you would wait to see if adaptive cruise control to come out I have a feeling honda is not going to add it until the do a major work over and it looks like that every 8-10 yrs I think they waiting so they can command more money and want it to be part of a major work over 3:35
I love coffee with an English muffin
I have to let you know that for the last while I have noticed that your background music is way too loud. While watching the video all of a sudden I have to turn down the volume so we don’t get a complaint from our neighbors. Could you maybe check and see if there’s a lower volume setting when your importing the music.
Great videos and congrats on the new bike.
I plan to turn it way down in the future.
I just got my 2024 dct. Where did you get your backrest? I watched your video on how to install it. Thank you so much because I now have the confidence to do it myself 😊
Hi Cruise, hurry up with the installation Belly Pan 😉
Nice looking bike.
I know you installed a lot of accessories on your last one. But have you saw the Goldstrike Accessory Hub? Very neat .
You gotta lot of work ahead of you. I bought a brand new 2022 and 2023 Goldwing Tour DCT and they did the fairing tab like yours both times. This time I told the tech about it and he went and looked at all of there Goldwings and he had done it to everyone of them. So yes it's a common mistake.
Love your videos. They are very helpful and informative. What, if anything have you noticed different from the 2018 to the 2024 ride wise? Example: does the DCT shift smoother, is the seat and suspension better or the same, and anything else that you may have noticed. Thank you again.
I can see you're going to need that Show Chrome front fender extension. I wish I had put one on mine sooner than I did. I, too, prefer the chrome on the engine over the black, but I guess we're the minority since they're not offering it now.
Congrats on your new bike rivco makes regular highway pegs you don't have to take off any thing to install they're also adjustable put up high no scraping unless you make a hard turn you can also get a front fender extension works out good thanks for the videos ride safe
Good to know!
I owned an 18 white model and the blacked out rims and engine look sooo much better than the silver...congrats.
I switched from the Rivco pegs to the Show Chrome ones. With the Rivco pegs I had to hold my feet up to use them and couldn’t actually “rest” my feet on top of the pegs either because the pegs would immediately try to fold into the stored (unused) position when I would relax my legs.
Hey, love the new bike! May i ask where you got the light youre using to help you see when working on the bike? Thanks
Cruise man forgot to mention the rivco highway pegs two brackets do mount to the engine case but all the weight is on the engine guard no worries about damage to engine case
Have you thought about reviewing C-way Canoe rank and hitch would be interested in your review of it
Congrats on the 2024 Goldwing. I'm curious to hear what the improvements are over the 2018. Also, how is that stock seat???
I can't ride without my goldstrike highway pegs I will say this cruiseman I doubt the way you ride you will ever scrape the highway pegs I am somewhat of a aggressive rider and I do ride in sport mode sometimes in the twisty mountains and I have scraped my highway pegs only a few times otherwise I put them up if I am really gonna push the gold wing thru the corners it's just safer for me but I will be shocked if you ever scrape the pegs
I have mine just a little higher towards the honda tip over bracket I have 32 inch seam I'm 6.1 I like to have my legs stretched out after using regular pegs for hrs
I'd grind those hwy pegs right off set that low if not lift a wheel or bust them off... Enjoy the new bike!
I have a request for you since I really trust your thoughts. I have owned Hondas four 1800s and upgraded to the 2018. I want to know how to safely tie down these new ones, into a trailer. I am especially concerned about swaying and falling over. I tied to the grips and then found that was not approved. I put on those tie downs at the front on the frame, then found they might break the frame. Can't tip it over without tearing up the bike, so I am afraid to practice in those parking lot practices either. Love the bike but it is not as bullet proof as the older versions. Please help with some comments and recommendations.
Do you ever use S100 when cleaning your motorcycles? I've used it in the past and thought it worked pretty well. Congrats on the new Wing!
I have not. But I am aware of it.
Hey @cruisemansgarage, you forgot to add the Ember cup link in the description :) I've been thinking of buying one for myself, don't like cold coffee either 😎
amzn.to/4awtMDI
I'm surprised you don't have a bike lift yet. Working on the floor sux.
Hey cruisy nice new bike love the black and the white but I could have swore you said in a previous video you said u prefer the Chrome frame and not the black one
I do prefer chrome
Bike looks awesome I just bought a 2024 myself I also noticed the backrest you have on it they don't make that style anymore to match the sest, would you happen to know why?
Which backrest did you go with?
How come you don't use blue lock tite? Or torx spec?
Have you ever thought about buying a bike lift/jack?
Yes. Still considering.
Jealous as heck that you got a 2024 before me, but I've got a lot more brownie points to earn first! I must say, if my Honda dealership miss fit any parts on my bike when they do work on it, that will be the last they see of me.
Any tips on how to make good coffee.?
I enjoy mild to medium roast. I am not a dark roast fan. I have been drinking Cameron's Coffee and I really like it. I use a cheap, 5 cup Black & Decker coffee maker.
I really like the Goldstrike Highway pegs. But resist the urge to push on them to reposition yourself while riding. Looks like it wouldn’t take much to break them off.
I get the same sensation. They do not feel very sturdy.
What is your thoughts on tilting motorworks dual front wheel? Do you know of anyone with the system? Or rode one of them?
Don't know anyone with one. It looks interesting.
what size of hex bolt is that for the lower cowl you took off to get to the hiway peg adj?
5mm Allen
Yes, the Goldstrike foot rests scrape. But if you do it right, it feels like a badge of honor (🤣🤣) But it IS a surprise when you're in a tight turn and you scrape the Bots Dot or road reflector. When you get the setting right, you wonder how you rode without them Excellent product.
I love the scrape!
The standard foot pegs scrape all the time anyway.
🌿 LOVE FROM MISSISSIPPI USA 🇮🇱♥️🇺🇲
Congrats again CG! Question: I'm doing my first tire change owning a DCT and struggling with tear wheel 🙆♂️ I can't get two nuts broke loose without a gear to lock the wheel down. I tried wedging boards under the tire but nothing worked. I even went to hand-held impact drills from 500 to 2000 psi and no movement 🤦♂️
Have someone apply the rear brake pedal to stop wheel from turning 🐸
Did you try the parking brake? liberally spray the nuts with some penetrating oil (be careful it does not spray through the wheel openings and onto the brake disc)
Maybe I’ve missed it but what was your decision to get a 24 and not wait for the 25 anniversary edition? The speculation is that they would be some desirable updates on the anniversary model wondering if you know something and not telling.
I had the exact same dilemma when I purchased my 2024. I figured if I like the 2025 that much I will sell/trade for it next Summer.
I’m surprised you went for the blacked out version. I thought you were a fan of chrome tbh
Doesn't the 2024 already come with (standard equipment) TPMS? Like my 2019 and your previous 2018? I'm just curious since you added the FOBO sensors. Will those mess with the original TPMS units?
The FOBO does not interfere with the OEM. And, it lets you see the tire pressure before the bike is moving.
@@cruisemansgarage True....thanks for the explanation and added benefit.
On my GoldStrike highway pegs, I rotated the "arm" between the foot peg and mount to a nearly vertical position, which means my driver footpeg feelers touch down a hair before the highway peg mount does. Let me know if you want me to send a couple pics.
For info, I have ~30" inseam, and also wanted the highway pegs higher.
Would love to see pics. info@cruisemansgarage.com
@@cruisemansgarage pics sent :)
Where can i purchase the dipstick extender from?
traxxion.com
What is the backrest that you are using?
Show Chrome
my 018 does nor have those engine guard bars, I think they would be standard.
My 2018 had them.
I was wanting to know if you were going to add the Traxxon “Tip Over Protection” before you put the Armor Shield IX on the new bike?
Considering it.
I was wanting to install the Tip Over Protection- but I am concerned about the removal of the Armor Shield on my 2021- any thoughts about removing the coating in the area to get a good installation?
@@Drajrichard99 You may want to contact Armor Shield support about this. I am thinking you will probably need to remove the coating from the entire mirror and face of the saddlebag. You will probably have to strip it off with a random orbital polisher. I am sure their FAQ page has more information on this procedure. After you have it stripped off, you can always re-apply it after installing the tipover parts.
The goldstrike pegs... You can't even imagine how scrapped mine are. I'm destroying them. They are the best looking but dangerous. I jumped my bike in a curve once, I did not panic but my mind went.. OH NO! GONNA DIE NOW! I tend to ride my GL pretty much like a racer once in a while so.....
I'm holding out for the 2025 50th anniversary model. If no significant updates, then I'll buy a new leftover model.
😊
Having owned an 18 and now a new 24, is the engine noise at idle pretty much the same? Or was the 18 noisier? My 21with 22K miles is definitely noisier at idle vs. what my '06 was with 59K miles on it. Are these newer Goldwing engines just noisier vs the last gens.?🤔
Cannot tell any difference.
How do you like the blacked-out version of this bike compared to your old bike?
I still prefer chrome, but the black is growing on me
Thinking of getting a 2023-2024 Goldwing Tour DCT.... is there any reason to believe the engine in the 6th generation won't last 300,000 miles like the 5th gen?
It should
How is that brake pedal still silver in 2024 ????? WTH Honda - LOVE the New Bike Cruze'
Yes. Traxxion sells a black out one.
If you ever drag your foot across the seat, accidentally or not, it’ll leave a mark.
You have always said that until something changes on the wing, you won’t upgrade. Knowing you something is different with the 2024. Do tell us what’s new.
If I had to guess, the change is it hasn’t been wrecked.
Yeah that bike im sure was never the same.
Hey Chris. Tried ordering videos today using your MEMORIAL code. It said that code is invalid.
Try this link: ott.cruisemansgarage.com/buy/2018-2024-goldwing-maintenance?code=memorial
@@cruisemansgarage I’m looking for the previous generation. I have a 2013.
what did you do with the 2018?...
Traded in
@@cruisemansgarage hope you got a good deal... enjoy coffee with the boys
It is inexcusable that the dealer would reinstall that part incorrectly.
As others have mentioned, you really need to get rid of that annoying music. It does NOTHING BUT DISTRACT from your content. If your future videos have loud music, I'm gone.
Love the music
No! to the chosen music
Love my Goldstrike foot pegs. Just need to be sure you give them a good torch down every time you remove them. I had them come loose a couple of times while riding after an adjustment. Also those black wheels just love to attract brake dust. I clean mine almost daily.
do get rid of that stupid soundtrack