Haier Top Loader ERROR CODE E1 - Pump Blocked
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2024
- This is a short photos video on how to clear a Haier Washing Machine pump. It is very difficult to find a service manual for these machines. The machine maybe branded Haier, Aspire, Daewoo or even some other branding. This video may not help everybody.
- แนวปฏิบัติและการใช้ชีวิต
Wonderfully straightforward instructional video. Probably takes a bit more time to type out instructions that are logical than to burble on and on for 20 minutes while you are doing the job, so well done. One of the best videos, and yes, it was a hairclip!
Cheers thanks
Thanks. Your straight forward instructions (mine is an older model with a different looking pump) gave me the confidence to have a go. Pump was fine but through the process of getting to that step a lot of small bits of gunk came out. I put it back together and it's going fine. I impressed the wife, too!
Thank you! My pump wasn't blocked but the bracket had snapped off, and I think it had dislodged one of the wires, because when I put it back together again with a makeshift bracket it worked like a charm AND it no longer knocks on spin (must have been the loose pump). THANK YOU. And FWIW I much prefer this slideshow format to an actual video, because there are very clear steps and instructions written on screen, so I could pause the video in between steps and still reference it. So that worked just perfectly, for me anyway :) cheers mate
Your comment also helped me. After my ex aunt inlaw used my washing machine and way over filled out of spite, have had nothing but issues with it making a loud knocking sound and not cleaning everything properly leaving behind heaps lint...now it won't drain and stuck saying e1 time to drag it outside to find out
Simple, short and soooo easy to understand., 🤦♀Almost threw out a good washing machine because of 2 x 50cent coins. Thank you 🙌
Paul I'm going to try this tomorrow and will update you. I just wanted to mention you apologized for it not being a proper video; but sometimes this is all that's needed. Fingers crossed for tomorrow mate.
Hi Paul, I just want to say thank you for this really helpful video. My machine is a Haier, and had a slightly different configuration, but I was able to adapt your instructions and remove the metal hair grip from the pump. Very satisfying achievement for an old woman! Especially when professional help was more than two weeks away. Thank you most sincerely, and please keep doing these because you obviously have a talent for it❤. And fyi the manufacturers repair video was absolutely pathetic by comparison and comprised only looking down the outflow tube for an obstructive item. Five stars to you!!
Women and there hair clips .....found four hair clips ....2 were jammed inside the pump....thanks for this video mate ....legend
Thanks heaps for the instructional video. I got myself into a bit of a pickle when the pillow I was washing broke apart in the machine and I wasn’t sure how to fix it. Each step was very informative and to the point, and for that my good sir, you have earned my absolute respect and a like on the video for your amazing helpfulness 👏👏👏👍🏻
😊
Thanks Paul! Fixed mine, had some coins blocking the water flow. Many thanks
Hey mate just wanna say I have a different washer but this helped me get to my pump and there was 11¢ that blocked it. I was able to fix it myself and now I just need to get a hose clamp on one end. Thanks again
That's great. It's a shame 11 cents isn't going to buy you much.
I was going to throw it out and buy a new one... Now working perfectly again. Thanks
Thank you so much for taking the time to make this! My husbands away and i got it all sorted with your help. 2 coins were found. Thanks again
Did your husband ever return? If not I’m here to service you.
@@eliwol3789 gross
Many thanks for the video, I had a golf ball marker inside my pump. After removing the obstruction my first wash cycle showed a leak betwwen the two halfs of the pump. At this stage I have fixed the leak with plumbers thread. I will look for a more permanentt fix when time allows
Thank you so much it helped with my washing machine. Hubby was suprised I actually fixed it.😊
Just because you can remove a hose don’t think you know what you’re doing. This is still man’s work and should be done by us and the professional’s. You could have flooded your entire house and broken your machine. Your best bet is to let your husband worry about this stuff and you focus on using it to keep the clothes clean.
@@eliwol3789 Thank you for your input, but I'm capable of doing what needs fixing and if there is something I need help with that is when I ask my husband or maybe I'm a widow. Who knows! Hope you have a blessed day!!
Legend., Followed your photos and fixed mine. Luckily I didnt have to remove the hoses to the pump. One of the wires to the pump had somehow snapped so I just had to attach it back 😀
Glad to hear!
Wow thank you very much for this helpful video, because my issue was a noisy penny inside the water pump!
Didnt need to remove the complete pump to find the plastic stuck in there just the outer housing that you revealed how to remove - Kind Regards
You are genius , I tried and it worked , save good money
Thanks mate was an easy job, appreciate the content!
cheers for video. coins stuck in pump. this video saved me $350 to get someone to fix it. took me 15 minutes to fix problem, cheers from New Zealand :]
Yay. I'm in NZ too
Hope you found heaps of coins. The most I made from someone's washing machine was $17 in coins. Bonus tip...lol...
Thank you so much. This helped me unblock the pipe and found a coin. So appreciated.
It's happened again, no coin so reluctantly going to have to check pump lol. Fingers crossed.
I am going to have a go. Fingers crossed. Thanks for your instructions.
Legend. Saved me $180 repair bill.
Thanks, you're a star!!
Thanks so much for this. 🙏👍
Hi thank you very helpful.
Thank you so much! Had a nz 10c coin stuck in mine so easy to fix following this 💕 off to the shop for some clamps now :D
mine was 2 50cent pices lol
My nieces little lady bra wire in mine 🤦🏽♀️ DIY NZ strong thanks to internet and this video.
Thank you very helpful video, fixed the problem
Helped a shit ton, cheers mate.
Thankyou managed to fix it myself and save on a repairman!
Do you have any thing on E2, water not draining?
Very helpful cheers mate
thanks for this... just opened mine and had a coin the pump!
Thank you it worked! :)
Better than will be by video. Thanks you.
and they use that type of glue to seal that pump to.i just used some cable ties .. quite a cheep pump compared to say a fisher and paykels one
Great video!!! Thanks a lot!!!
Thanks for posting , it's helped me a lot .
Dude you saved my ass. Thanks!
Thank you!! Just got a coin out of one of the hoses!!
Thanks you saved me a couple of hundred $$$😁
Thank you, found 2 50c coins, saving me heaps.
you came out $1 richer LOL
Goin to try this now
I have the same machine the bracket that holds the pump where the two screws are have snapped can I replace the bracket without replacing the entire pump
Yes there should be 2 or 3 extra screws that hold the pump to the bracket
thank you!!! was a darn coin
Only one coin? The most coins I've found stuck in a pump added up to $9.20 ! LoL
i need help pls
Awesome video thanks! Pipes and drain pump are clear, but still noisy when recirculating water so think it might be an issue with the main pump-do you have a video for removing and checking this? And is it difficult to do?
Sorry this is the only video for the pump for this machine that I have. This model only has one pump and that is the drain pump. Maybe yours has a separate recirculation pump which I can't help, sorry. If so, It should be obvious somewhere inside the machine. Maybe it can be pulled apart also. Do you have a model number so I can look in a service manual
@@paulywooly eeesh just had another look, and I think what I was assuming was another pump is actually the transmission etc beneath the drum... Do you know if this is this easy enough to remove? (the belt looks intact so have ruled that out for being worn and causing the noise)
Model is HWMP55-918
Or is it likely to still be the drain pump making the noise and just better to replace that? The white "fan" component of the drain pump was clear of debris, and I could turn it with my finger easily, however it didn't continue spinning if I flicked it-not sure if this is normal or worn...
Thanks so much for all your help and reply Paul!
Did you split the pump apart? This is at 1.20 min . Or maybe it's the motor itself. I found bits of crap inside the motor before. Pull the motor out of the casing( with a bit of effort ) and see if it's clean inside
Sorry I didn't see this comment. I haven't ever pulled the transmission apart before so can't help with that
The pump, slips off the housing, so no need to disconnect the wires.
My E1 was solved by cleaning the drain filters
Does this help fix the water leak
Probably not
I cant understand that !but my grandfather is trying to repair! haier washing machine! pls help... eorror 3 e3 pls
Hey how did you get the wires out
You may have to squeeze the terminal with pliers to push the release button . Here's a picture of the terminal with a lock button
au.rs-online.com/web/p/spade-connectors/6692848
Hi. Do you have a video of a haier machine top loader Er2?
Thanks
Sorry no I don't.
E2 is a lid not closed properly, faulty lid switch or broken lid switch mechanism.
But my video for E3 is very close to what you need. This video shows the "out of balance" switch.
The other switch under the panel you will find, is the lid switch you will need to test it. Hope this helps th-cam.com/video/kstMxO9JLWE/w-d-xo.html
@@paulywooly Thank you so much.
Really appreciate it.
Hi do you have a code for AO? Motor runs constantly as soon as powered on
Sorry Can't help with that code
your computer module is buggered - time for a new machine
Hi Paul.
My machine says E1. I have pulled the pump off and cleared the debri. Pin blocked the pump. All going well. For a few months then E1 again. Pulled it off but nothing blocking the pump. It goes on a run of being Good to playing up. Could the pump be faulty?
Could be a faulty pump. Did you split the pump in half like in the video? The motor can be getting jammed inside the motor itself. Try pulling the shaft right out of the casing and give it a clean up
Paul P thanks for the reply. Appreciate it. Yes I did split the pump but was only looking for debris for it to be blocked like hair pin. I turned the prop in the pump and it felt sticky, If that makes sense so it could be that. I’ll pull the shaft out Thai time and see what I can find.
@@R1PUUP It's been a long time but from memory the impeller and shaft and windings should all lift out of the casing with a bit of effort and rubber sealing ring somewhere. Otherwise the pump can be purchased online
Paul P yes have just pulled it apart and gave it a good clean. It’s held in magnetically. Will pop it back in. And see how it goes. I have new pump I can purchase so if this doesn’t do the trick I’ll purchase the new one an see how that works. Thanks Paul.
@@R1PUUP No worries. Good luck
Hi paul still it's not draining and showing E1
could you pls help me. Thanks
Maybe the pump itself is faulty. If you take the pump out it can be pulled apart like the video then pull up the impeller and shaft together out of the casing. It maybe full of crud. Clean and lubricate with CRC and put back together.
Where is the water inlet valve, for error code E4?
Check my other video to get to the water valves. Jump forward to 45 seconds onwards
th-cam.com/video/kstMxO9JLWE/w-d-xo.html
what about error code E-4 pls?
E4 is a water inlet blockage or water is filling too slow. Undo the water hose and check the filters. Sometimes there can be 3. One at each end of the hose and one in the water inlet valve. The one inside the valve needs pliers to remove. If filters are clean then could mean the inlet valve is faulty or jammed shut.
Meri machine power supply nhi kr rahi...
It is stuck plzz hlp
E2 error??
The lid is not closed properly. Or the lid switch is faulty
hi
Hi Paul. I've gone through and removed the pump and checked any blockage but all clear, no objects inside the pump. I reconnected and still not rinsing water. What could be another problem? E1 message still showing?
If it's not blocked then it's probably a seized or faulty pump. Can you hear a slight humming when it tries to drain ?
@@paulywooly Hi Paul. Thanks for the quick reply. No humming rather a clicking sound ...
@@raytapuai492
Ummm
Is the machine still full of water? Maybe the drain pipe is blocked. Can you blow REALLY hard down the end of the drain pipe and hear bubbles coming up thru the water. If you can't blow freely down the pipe means the pipe itself is blocked.
Are you in NZ?
@@paulywooly I can blow freely through the drain hose and yes it's bubbling as I blow. Also yes, I'm in NZ. Auckland.
@@raytapuai492 ok definitely sounds like faulty pump. What's the exact model number?
This is my supplier in Palmerston North that's probably the best price. You could try Axial Appliances in Mt Wellington Auckland but might be more expensive.
Check the link that it fits your model number
I hope I'm right about the diagnosis.
Good luck
www.appliancespares.nz/products/haier-washing-machine-drain-pump-askoll-h0034000110d-h0034000110-h0034000110s
Pulled pump apart and found rivet mandrel in it. Bloody kids🙄
So you wasted time....