[LG Front Load Washer] - OE Error (Fixing the drain issue)
ฝัง
- เผยแพร่เมื่อ 17 เม.ย. 2022
- Are you seeing the OE error code on your LG Front Load Washer? This indicates a drainage issue, but don't worry - we’ve got you covered! In this video, we'll walk you through the steps to fix the OE error and get your washer draining properly again.
In this video, we'll cover:
Common causes of the OE error code.
How to inspect and clean the drain filter.
Checking and unclogging the drainage hose.
Inspecting the drain pump for obstructions.
Tips to prevent future drainage issues.
Follow our step-by-step guide to troubleshoot and resolve the OE error quickly and easily. If you find this video helpful, please give it a thumbs up and subscribe to our channel for more appliance repair tips and guides. If you have any questions, leave a comment below, and we'll be happy to help!
#LGWasher #FrontLoadWasher #OEError #WasherFix #DrainIssue #ApplianceRepair #HomeMaintenance #WasherTroubleshooting #LGSupport #DIYRepair #HomeAppliances #WashingMachine #LGFrontLoad #WasherErrorCode #TechTips #LaundryTips #WasherMaintenance #FixItYourself #HouseholdHacks #DrainageProblem#lg_front_load_washer
#wmfl_demo_settings, #wmfl_demo_errorcodes, #wmfl_troubleshooting_guide, #wmfl_self_maintenance_guide
Refer our below playlist to know more about LG Front Load Washer Functions & Features:
1. Washer Demo & Settings:
• [LG Front Load Washer]...
2. Self Maintenance & Cleaning Guide:
• [LG Front Load Washer]...
3. Different Troubleshooting Guide:
• [LG Front Load Washer]...
4. Troubleshooting Guide based on Error Codes:
• [LG Front Load Washer]... - วิทยาศาสตร์และเทคโนโลยี
@LG DIY Service I figured out the issue. I tried all lg recommended fixes and had the same issue with my LG front loader OE error code. This is the fix. MAKE SURE THE 3 AIRWAYS INTO THE TUB ARE NOT CLOGGED WITH YEARS OF USE. Specifically, I pulled the hose off between the tub and pump, looked at the inside of the far back connection of that hose, and the inside is white plastic tube about 1.5 inches in diameter and it had crud blocking the small air hole that connects to the hose to the water level pressure switch. Apparently, the Water Level Pressure Switch determines if water has been expelled. The crud was mostly lint and dirt. You can look up the white tube from the front of the washing machine, with the front panel removed, with a mirror and clean it out with some spray cleaner and a couple paper towels crammed into the 1.5 in diameter hole and twisting the towels around with needle nose pliers. Then use a paper clip straitened to clean out the small hole inside that tube. Get all the crud out. If you do this, you may as well clean the top center of the tub air inlet by taking out the black hose pulling out the mushroom looking device and cleaning it. Then to the left of that is a small black hose from the exit water hose. Pull that from the tub and clean that by using the straightened paper clip. Stick it in the little hole at lease 2 inches and wiggle it around to loosen up any crud buildup. There is nothing on the internet about this so, good luck. I wish LG would indicate the water level pressure switch air intakes need to be clean or you could get an OE error as part of their process. LG feel free to award me $ or even a new kitchen set for making this information available. This problem will happen to any if these LG front load washing machine about 15 years old. They are great washing machines!
Thank you!
Thank you, it was very helpful & solved my problem
Thank you for sharing your kind words with us. Your satisfaction is our priority and this keeps us motivated in providing excellent service to all our valued customers like you.
Hope you continue to choose LG in the future.
Thank you for contacting LG, Have a good day.
This vid saved me $80. Thanks!
Thank you!
Tengsss berat ❤
I pulled the black thing and instead it just overflowed all over the ground.
Hello, Thank you for contacting LG Electronics.
Kindly clarify your inquiry and inform us of the unit model number and the country in which you are located to assist you with your request.
You should have gotten the little hose uncapped it and emptied all the water from the pump assembly before opening the filter. It is possible for the little hose to be clogged with sand too if you have not used it in a while, and if so you should clean it so it will clear out the water in the water pump before untwisting the larger plastic filter. I used a wire to break the dirt up in the little hose.
same nothing comes out the little hose
@@LGService4u drain was not work
I am getting an OE error code on my WM2233HU LG washing machine usually on the second wash. I have replaced the pump, pump hose, checked pump filter and it is clean, ran a clean cycle. Even after all that work the error code still comes up usually on the second clothes washing and each following washing for a given day.
Thank you for your message, please let us know in which country are you located in order to assist you with that
@@LGService4u US
Thank you for your message, please visit the below link LG US contact details to get assistance in your inquiry.
www.lg.com/us/support/contact
@@LGService4u I figured out the issue. I tried all lg recommended fixes and had the same issue with my LG front loader OE error code. This is the fix. MAKE SURE THE 3 AIRWAYS INTO THE TUB ARE NOT CLOGGED WITH YEARS OF USE. Specifically, I pulled the hose off between the tub and pump, looked at the inside of the far back connection of that hose, and the inside is white plastic tube about 1.5 inches in diameter and it had crud blocking the small air hole that connects to the hose to the water level pressure switch. Apparently, the Water Level Pressure Switch determines if water has been expelled. The crud was mostly lint and dirt. You can look up the white tube from the front of the washing machine, with the front panel removed, with a mirror and clean it out with some spray cleaner and a couple paper towels crammed into the 1.5 in diameter hole and twisting the towels around with needle nose pliers. Then use a paper clip straitened to clean out the small hole inside that tube. Get all the crud out. If you do this, you may as well clean the top center of the tub air inlet by taking out the black hose pulling out the mushroom looking device and cleaning it. Then to the left of that is a small black hose from the exit water hose. Pull that from the tub and clean that by using the straightened paper clip. Stick it in the little hole at lease 2 inches and wiggle it around to loosen up any crud buildup. There is nothing on the internet about this so, good luck. I wish LG would indicate the water level pressure switch air intakes need to be clean or you could get an OE error as part of their process. LG feel free to award me $ or even a new kitchen set for making this information available. This problem will happen to any if these LG front load washing machine about 15 years old. They are great washing machines!
@@conanthedestroyer7123 thank you for the detailed explanation 👍🏼👍🏼
ذالك انبوب صغير اسود الذي بجانب فلتر عندما كنت احاول إخراجه لقد دخل داخل غسالة كيف اقوم بإخراجه أو كيف افتح غسالة لإخراجه ارجو رد ومساعدة
السلام عليكم
شكرا لتواصلكم مع خدمة عملاء أل جي للالكترونيات
.الرجاء قبول اعتذارنا عن المشكلة التي تواجهها والعلم انه يجب ان يقوم الفني بزيارتكم وحل المشكلة.
أي بلد موقعك الحالي من فضلك؟