Hey nice truck I wanted to know how level the rear of your truck is does the left side sit lot lower than right side. Mines pretty bad even without much gas. Did your front wheels move back after lowered my left wheel back farther than right side
What size are your wheels and tiers just wondering are the good on highways and traveling far I seen ppl say 22 are safer then 24 if you like traveling far
Did you get rid of the blacked out tail lights? Reason I ask I got the same ones but with all the rain in Fort Worth some water made it in the lights curious to hear what happened to yours?
Pass on ihc kit don’t align like they claim and they full of bs . He was probably cool with u because u have a TH-cam channel but costumer service is ass . I think mcgaugjys and djm would be your best bet for your $ they been around longer 👍🏻
I found a lowered new body truck today that look just like yours but with escalade wheels on it, at first i thought it was your old one. i took a picture of it and can email it if you want. the side of the bed was dented in though : /
Do 28's & tubs bro. It stands good to me. If you want to go an inch lower like you said then go for it. You probably going to have to cut some of the fire wall and re locate a few things under the hood.
Running a 2 piece drive shaft ? I got the stock 1 piece on my crew cab and had to notch both my crossmembers but noticed front of driveshaft rubs on the cab now if I have a lot of weight 😂
I have a 2016 ford f150 crewcab with ihcsuspension and it rides rough up front and the bushings squeak a lot even after re greasing it. Swapped it out for some Maxtrac spindles with belltech lowering shocks and it rides way better then the ihcsuspension.
I bet the upper a arms were too long on the tubes I bet you had to cut them at least a quarter of an inch so you can get the truck to align. Because that is what I had to do. But then they wanted me to buy the other said that fixes it. I’m just saying. Buy Bell tech
Ihc arms are not the best they didnt align for me . He sent me wrong ones , Costumer service was ass he didn’t refund my money . They are real scammers . Best kit is djm hands down
Hey man I installed a 4/6 drop kit on my 18 Chevy Silverado 4x4.. so I put some 26x10 borghini but now the rear is shaking like crazy..put my stock wheels and it still shakes.. I took it to get the opinion angle right they said it was off so they fix that but it still shakes on the rear.. you know what else could be or have you had any of problems? Need help
Do they adjust the pinion angle right ,,,also these trucks,have issues with shaking around 65-70 mph could be drive shaft,torque converter on the 8 speed tranny or tranny fluid, Some people do the rear end axles and re balance the drive shaft helps but doesn't fully solve the problem.
Only thing is they can’t weld for shit. Done broke 2 control arms & alignment never stays. Gotta say it rides good but isn’t worth being stuck on the side of the road
Sounds like you want to Please other people about how it looks. If you can’t find a height that’s right for you Just bag it, then you can set it how you think your viewers want it. I thought it was your truck? Maybe just do what you want and not give a sh*t what other people want or think.
I have the same kit love the way my truck rides am in philly representing dallas
Love the truck clean and simple and still breaks necks
Looks good as is, I’d keep it and try some other rims. Out of curiosity what’s your price for the truck?
You need to do reviews of other people’s trucks. Starting with mine lol . I’m in Dallas
Hey nice truck I wanted to know how level the rear of your truck is does the left side sit lot lower than right side. Mines pretty bad even without much gas. Did your front wheels move back after lowered my left wheel back farther than right side
What size are your wheels and tiers just wondering are the good on highways and traveling far I seen ppl say 22 are safer then 24 if you like traveling far
BEAUTIFUL TRUCK
Did you add that clear film to your front bumper ? I want to color match my truck but I’m not looking forward to the rock chips lol
WHAT PLACE IN IRVING DID U GET UR TRUCK DONE ??? IM IN DUNCANVILLE TX.. LET ME KNOW
Did you get rid of the blacked out tail lights? Reason I ask I got the same ones but with all the rain in Fort Worth some water made it in the lights curious to hear what happened to yours?
2 part question what brand and finish are on the wheels, and would u consider selling them
What's up Reese!! We met at QT.
Man the truck is clean the way it is. But whatever makes you happy.
Haha man! right when i uploaded this i was like i wonder if Michael gonna see this haha! i appreciate it man yours is clean as well!
Pass on ihc kit don’t align like they claim and they full of bs . He was probably cool with u because u have a TH-cam channel but costumer service is ass . I think mcgaugjys and djm would be your best bet for your $ they been around longer 👍🏻
I found a lowered new body truck today that look just like yours but with escalade wheels on it, at first i thought it was your old one. i took a picture of it and can email it if you want. the side of the bed was dented in though : /
Where did you got your alignment done?
Do 28's & tubs bro. It stands good to me. If you want to go an inch lower like you said then go for it. You probably going to have to cut some of the fire wall and re locate a few things under the hood.
What do you think about McGauys lowering kit?
Can you still run a 26 with the INEZ kit but have 0 gap like when you ran the mcgaughys kit like in your older video????
If you do tub the front please review it I have a crew cab Denali lowered as well and I’m considering it highly just not sure about it
I would give up the world for this truck 😍😍😩
7-9 mcgaughys lift on 26x16/ 37s. upgrade to the ltz/high country headlights.
Thanks for the review
Where do you buy your wheels?
Can you please give me the info on your suspension guy installer thanks
Good video
Bro what’s the shop that did your lowering kit
how much would you leave the truck for if you sale it ??
How you like those over DJM control arms
Same control arms,IHZ was using moog but not anymore maybe they using a premium private balljoints now
Running a 2 piece drive shaft ? I got the stock 1 piece on my crew cab and had to notch both my crossmembers but noticed front of driveshaft rubs on the cab now if I have a lot of weight 😂
What drop u get?
Where did you get you bed cover?
Wat size r you wheels
I’m running a 2019 Chevy 3/5 inez kit and rides like a dump truck
BrickKickz 😂😂😂
I have a 2016 ford f150 crewcab with ihcsuspension and it rides rough up front and the bushings squeak a lot even after re greasing it. Swapped it out for some Maxtrac spindles with belltech lowering shocks and it rides way better then the ihcsuspension.
Thats on you then. There is no reason the suspension would change at all.
Nice truck
I bet the upper a arms were too long on the tubes I bet you had to cut them at least a quarter of an inch so you can get the truck to align. Because that is what I had to do. But then they wanted me to buy the other said that fixes it. I’m just saying. Buy Bell tech
2wd or 4wd
Drop another video so hard to find dope dropped truck youtubers 👍🏼
Ihc arms are not the best they didnt align for me . He sent me wrong ones , Costumer service was ass he didn’t refund my money . They are real scammers . Best kit is djm hands down
Did you change your struts in the front or did you use your stock ones Because mine is doing the same thing. I need to get shorter struts upfront.
How much was your kit from ihc?
North west dallas here bro💯
Raymundo Verastegui whack
1SlowAvy Cho ass up
Ayyyye Garland! Me too
What you do for a living ?
M6ndo Hernandez probably hangs Christmas lights
Bart Simpson don’t hate just because he doing better than you 😂
no hate here... just answering your question... thats what he said in this video...
Bart Simpson calm down keyboard cowboy. I know someone that does that and makes a decent wage so fuck you for trying to put people down
Xavier he wasn't putting anyone down lmfaooo 😭😭. He said it in the video. Y'all dumbasses need to calm down. 💀
What drop is that
Looks straight like a cartel truck
Hey man I installed a 4/6 drop kit on my 18 Chevy Silverado 4x4.. so I put some 26x10 borghini but now the rear is shaking like crazy..put my stock wheels and it still shakes.. I took it to get the opinion angle right they said it was off so they fix that but it still shakes on the rear.. you know what else could be or have you had any of problems? Need help
Pinion angle*
Do they adjust the pinion angle right ,,,also these trucks,have issues with shaking around 65-70 mph could be drive shaft,torque converter on the 8 speed tranny or tranny fluid,
Some people do the rear end axles and re balance the drive shaft helps but doesn't fully solve the problem.
Did you ever find the problem I have the same setup with the same problem
Any one else have trouble greasing upper ball joints
Only thing is they can’t weld for shit. Done broke 2 control arms & alignment never stays. Gotta say it rides good but isn’t worth being stuck on the side of the road
No way??? 👀 got me a little skeptical
what size rims?
24
what drop
Knock off tire shops on Buckner LOL..... USA Tires everyone one knows what it is
Bag it!
🤤🤤
Sounds like you want to Please other people about how it looks. If you can’t find a height that’s right for you Just bag it, then you can set it how you think your viewers want it. I thought it was your truck? Maybe just do what you want and not give a sh*t what other people want or think.
😂🎉🎉🎄🎁4
Shit is ruined
How much was parts and labor?
How much was your kit from ihc?
Reechoe El destroyer 750$ w/ shipping
That’s nice I have a bell tech 2/4 right now on 26s but thinking of going lower