I have INEZ IHC 4/6 Drop kit on my 2019 Chevy 1500 Ext Cab. I didn’t lose much turning radius. A little but not that bad. 🔥 I love the truck and the content keep it up!! 💪🏼
I’m really liking what I’m hearing about inez. I had a 4/8 drop from djm on an 06 crew cab short bed and it rode like shit. I’m ok with losing some turning on my 14 crew cab as long as it still rides close to stock
I was going to buy the McGaughy's but went with Maxtrac using 2" spindles with their adjustable strut and rear flip kit. I have no issues in ride and turning radius. My truck is a 2018 Silverado crew cab.
I’ve got djm 3/6 kit on my 18 f150 was able to get the alignment back to factory specs. Haven’t heard about any issues with ball joints but deff gonna be on the forums looking more into it lol.
I do my own alignments my truck is on the 5 inch setting with the inez arms my alignment is perfect in stock specs I'm in fort worth if you want me to align yours someone Isnt doing it right
Ezequiel Palacios - nahh this dude is from the DFW area... I’m also in El Paso and I’ve also seen the truck you’re talking about... same truck about the same drop a little more rake on the truck down here in 915 and he’s got some Tahoe ltz wheels instead
i have the new Control arms and turning is fine but the alignment issues are trash, ive had mine aligned 3 times in 6 months and they still cant get it right.. pulls to the right slowing down.. idk im a little disappointed
That shortened radio antenna looks clean I took mine off so no radio just blue tooth from my phone I got a 2015 with a 4\7 drop I really like those 2016 and up front end u have a standard bed or short bed crew cab?
I recently replaced upper and lower control arms on my truck.. stock ... but get i took it for an alignment it still was off like yours.. do yu think my lower control arm caused it??
hey man i was gana ask u a question so i was planning on going 3/6 or 4/6 on my truck i have a 01 silverado but do u think id need a notch or could i just run a flip kit with shocks🤔
Reese Anderson .. question.. so after the new arms where sent out to you did the turning radius come back to factory or close to it?? Are you still having issues with alignment?
I just lowered my 2014 Silverado and the rear of truck always bottoms out. It has a 4/6 drop kit. Looked under truck and noticed bracket for brake lines mounted on top of rear end is hitting the bed. Did you cut your bed for clearance or how did you fix this problem?
I got belltech just the lowering springs 3/4 on my 2018 tahoe rwd LS on stocks wheels it rides great. I had 24s on them and it rose like a 1994 Honda Civic with cut springs
My IHC kit rides like shit. My mcgaughys rode way better. When I talked to IHC about it they said something was out of balance but everything checked out.
On the to do list to remove the plate haha I’ll do that probably this weekend, I’m gonna get a black frame just so there’s something back there haha! What’s so good about this dash cam haha you always comment it I haven’t looked into dash cams to much
I have an IHC 4/6 on my '16 Silverado. Rides good but they have have work to do. Their arms are good but ball joints are junk. Need to replace with moog lowers and need to redo upper arm to fit moog uppers. Both are very cheap chinese made joints. Check out gm-trucks forum for more info. They are a good group of people.
@@HL-kb1ex The kit I received from them had some of the cheapest joints you can get according to my mechanic. If you get the kit pop some Moogs in the lowers. Moog doesn't have a joint that fits the upper but you can get better uppers as well. The arms are built well and the guys at IHC are really cool especially if you need help. The customer service from Inez is awesome and I would have no problem doing business with them in the future.
I did have both lowers sheer off on me. Luckily it was in reverse so I was going slow and not at 80mph on the freeway. I am looking to replace the upper arms with something like the Twisted Metalworkz uppers for greater adjustability. I also have large turning radius that Reese mentioned (not as bad though) but it doesn't bother me much unless I go through a tight turn drive through. : )
Do not buy ihc control arms . They don’t align i tried 2 good known shops that I’ve gone before with djm set ups that did align 100% . Not to mention ihc costumer service was noting like yours was man . It’s sucks they are not professional at all . Will be making a IHC control arm review soon too
I have INEZ IHC 4/6 Drop kit on my 2019 Chevy 1500 Ext Cab. I didn’t lose much turning radius. A little but not that bad. 🔥 I love the truck and the content keep it up!! 💪🏼
Did you use the bolt on c-notch?
I’m really liking what I’m hearing about inez. I had a 4/8 drop from djm on an 06 crew cab short bed and it rode like shit. I’m ok with losing some turning on my 14 crew cab as long as it still rides close to stock
I was thinking the same on losing turning
I was going to buy the McGaughy's but went with Maxtrac using 2" spindles with their adjustable strut and rear flip kit. I have no issues in ride and turning radius. My truck is a 2018 Silverado crew cab.
Eddie Chavez did you have c notch on it?
@Eddie Chavez how low did you go with the maxtrac?
Have any picture? Did you have any alignment issues?
Same the maxtrac is the best and cheapest lol
Appreciate you sharing this now tryna figure out which way to go with a drop kit
I like this truck better than the new one it has, sadly it doesn't have it anymore, just for this truck I subscribed to the channel ...
That would be one unbelievable bad ass sport looking Chevrolet in a two door. The paint and wheels look awesome! Just two many doors for me.
GM brought the reg cab short bed back for 22 but only with 4cyl engine. ☹️
Love this truck it's perfect cuh
Did you adjust it man? Cz I have the same kit and it rides amazing, no camber or any alignment issues. Hands down best kit ever
One year later, do you still like the kit?
Awesome review. What are your thoughts on belltech lowering kits?
Damn first time seeing a vid with no dislikes
Give me one sec...haha jk
I’ve got djm 3/6 kit on my 18 f150 was able to get the alignment back to factory specs. Haven’t heard about any issues with ball joints but deff gonna be on the forums looking more into it lol.
William Hall have a video of your truck? I have an 18 as well. Looking to drop it with the same kit
Just uploaded a video of it
I do my own alignments my truck is on the 5 inch setting with the inez arms my alignment is perfect in stock specs I'm in fort worth if you want me to align yours someone Isnt doing it right
you do alignments?
I have a mcgaughy 4/6 drop flip kit on my 2011 Sierra 4x4 crew cab, and it vibrates when I go 60-75 on the freeway
Could be the driveshaft you need a 2 piece if your going that low
Got belltech on Mine rides like a Cadillac
Badass truck bro, are you from El Paso? I think I've seen you around
Ezequiel Palacios - nahh this dude is from the DFW area... I’m also in El Paso and I’ve also seen the truck you’re talking about... same truck about the same drop a little more rake on the truck down here in 915 and he’s got some Tahoe ltz wheels instead
It flashes because the leds mess with the camera
Also the headlights flash bc of the way the LEDs clash with the camera
I have the 4-in drop upper control arms by spindle source and I lost turning radius from my stock ones 😩 fkn sucks
i have the new Control arms and turning is fine but the alignment issues are trash, ive had mine aligned 3 times in 6 months and they still cant get it right.. pulls to the right slowing down.. idk im a little disappointed
on a 5/8 did you need a custom drive shaft or are you running the stock one???
Dude this truck is so sick.
I'm trying to upgrade and don't know which to go with... GMC Sierra or chevy Silverado.
That shortened radio antenna looks clean I took mine off so no radio just blue tooth from my phone I got a 2015 with a 4\7 drop I really like those 2016 and up front end u have a standard bed or short bed crew cab?
the great Salvador get a shorty antenna there’s a lot of pretty high quality ones my hb has a 50 cal bullet as an antenna
2005 silverado lt crew cab....at what size drop in rear do I need a 2 piece drive shaft want to do a 5,7 drop any advice Thank You...
When you say it rides like ass…what exactly are the issues, lol.
These kits are currently my main choices for lowering my 08 Sierra.
I recently replaced upper and lower control arms on my truck.. stock ... but get i took it for an alignment it still was off like yours.. do yu think my lower control arm caused it??
hey man i was gana ask u a question so i was planning on going 3/6 or 4/6 on my truck i have a 01 silverado but do u think id need a notch or could i just run a flip kit with shocks🤔
David Dominguez dropped it already?
David Dominguez u dont need a cnotch bro
Reese Anderson .. question.. so after the new arms where sent out to you did the turning radius come back to factory or close to it?? Are you still having issues with alignment?
That's what i wanted to know!
What do you for a living man? nice truck!
I thought u were dead ? So Osama what type of truck u like to ride in lol
Did you change the shocks on the mcgaughys kit? Think about getting one for my 03 sierra on 22s.
I just lowered my 2014 Silverado and the rear of truck always bottoms out. It has a 4/6 drop kit. Looked under truck and noticed bracket for brake lines mounted on top of rear end is hitting the bed. Did you cut your bed for clearance or how did you fix this problem?
Mike Lum you have to cut the bed frame rail into c notch bro
Also shocks extenders and street performance shocks bell tech
just use rhe drop spindle i think it will fix your aliment or control arms from reckless
Just buy another spindle set for the front that’s what I did man nice truck
i like my McGaughys kit on my 7.5-13 silverado but i do have singlke cab idk
I got my truck lowered alread and have no idea what lowering kit it’s got I just know the back is a flip it don’t knOw what brand
Whatta about The Belltech 2"/4" how does it ride? cus I'm getting ready to lower my 2018. thanks for your reply Buddy..
Lmk how that goes i want to to do the same drop on my 2003
I got belltech just the lowering springs 3/4 on my 2018 tahoe rwd LS on stocks wheels it rides great. I had 24s on them and it rose like a 1994 Honda Civic with cut springs
Yea flashing does that too I noticed.
That's clean
Nice truck what year make and model and how do I get it lowered
You should get some nice exhaust tips.
no he shouldnt
Mcgaughys is pronounced "magoys" not "magafy" just an FYI!
Did you install the kit.? Or did you take it somewhere to get it install .?
What’s your opinion on belltech?
Hey bro you have a nice truck i wish i had nice truck like that
What brand drop kit you recommend on a 2014 Chevy Silverado lt crew cab I want a 3/5 drop
A lot of people recommend Mcgaughys
For the 18 Silverado, what kit is best for only lowering the rear to be level with the front?
Drop shackles
That looks bad ass
Should i go drop spindles or drop control arms? I want to go 5/7 with my stock 17’s on my 02 silverado
Control arms if you wanna ride 17s with the spindles you will need to ride with 20s
Plus you dont have alignment issues with control arms
Nice truck
What’s your opinion on the max trac drop kits ?
Lmfao “I Don’t want you to think I got some shit going on”. I think it’s called a resistor u can install to make ur led strip lights flash like that
Joshua Hernandez no it’s the frequency of the lights flashing and the frame rate of the camera.
My IHC kit rides like shit. My mcgaughys rode way better. When I talked to IHC about it they said something was out of balance but everything checked out.
What rims do you have
You should remove dealer plate frame and get BlackVue DR900S front and rear dash cam.
On the to do list to remove the plate haha I’ll do that probably this weekend, I’m gonna get a black frame just so there’s something back there haha! What’s so good about this dash cam haha you always comment it I haven’t looked into dash cams to much
Reese Anderson because of stupid drivers,hit and run,Proof that your not at fault,scammers,and many situations that would be super helpful.
What size wheels on truck
My man help me out… I need my 2017 silve dropped I’m in Wylie….
Any body know wick kit works better djm or max trac
what wheels are those]
Anybody know the best kit for a 5/7 drop on an 03 extend cab Silverado
Ever find a good kit?
How much kit bro got 2018 gmc
What would you use if you were doing only a 2/4 drop?
Drop spindle and flip kit with a lift hanger and 2 inch drop shackles
Truck looks good, Mcgaughys is pronounced mcgoys
Get an exhaust set up & do a video on it. Maybe cam🤔 great videos tho man keep it up! Maybe burnout video🙊
Where do you get the lights to make it strobe ?
uriah harvey they don’t do that in person . It’s the camera
How are those rims called
migel reyes gmc reps
what hood is that
What’s the best lowering kit to go with mccaughys or Inez ?
I have an IHC 4/6 on my '16 Silverado. Rides good but they have have work to do. Their arms are good but ball joints are junk. Need to replace with moog lowers and need to redo upper arm to fit moog uppers. Both are very cheap chinese made joints. Check out gm-trucks forum for more info. They are a good group of people.
@@HighToy85 so ihc has bad ball joints
@@HL-kb1ex The kit I received from them had some of the cheapest joints you can get according to my mechanic. If you get the kit pop some Moogs in the lowers. Moog doesn't have a joint that fits the upper but you can get better uppers as well. The arms are built well and the guys at IHC are really cool especially if you need help. The customer service from Inez is awesome and I would have no problem doing business with them in the future.
I did have both lowers sheer off on me. Luckily it was in reverse so I was going slow and not at 80mph on the freeway. I am looking to replace the upper arms with something like the Twisted Metalworkz uppers for greater adjustability. I also have large turning radius that Reese mentioned (not as bad though) but it doesn't bother me much unless I go through a tight turn drive through. : )
@@HL-kb1ex Also wanted to say IHC has made a lot of changes to their kit and quality control since I bought mine in 2017.
Your looks just like mine same wheels and color
What size tire did you run?
Name of rims?
Belltech on my 08. Smooth asf.
And You're pronouncing Mcgaughys wrong. Haha..
How did you get your lights 2 flash like that
busaracer590 it’s the camera that make em look like that
Hows beltech?
OTR ATL beltech is awesome
Yeah man I have beltech 5/7 drop kit on my 94 stepside chevy. Rides smooth asf
Belltech is the best for lowering trucks hands down
Whats a good drop for a 2017 Silverado
The truck in the vid is the same gen 2016-2018 so that 17 silverado is the same one as the one in the vid .
Do not buy ihc control arms . They don’t align i tried 2 good known shops that I’ve gone before with djm set ups that did align 100% . Not to mention ihc costumer service was noting like yours was man . It’s sucks they are not professional at all . Will be making a IHC control arm review soon too
Nice truck bro
What year is your truck? I was looking at the ihc kit to lower my 16 single cab. Tbh I don’t what direction to go to lower my truck.
What city do you live in I live in Mckinney.
Rockwall
Reese Anderson oh cool
Reese Anderson do you go to shows or Dallas cars and coffee.
How u make your parking lights flash like that? Or it comes from factory
Thats due to the refresh in the camera
By the way
Pronunciation of Mcgaughys 🤦♂️
2GUNMASTER it’s “mc- gohes” how it’s pronounced
i have IHC rides like shit on low pros drop spindle and beltech shocks w factory arms rides way better stay away from ihc
Damn, get to the point
Nice content -suelo.buckwheat
Gage Hunter 😉😉😉
Mario Vela uffff
Mcgaughys is trash . Don't mess up by even thinking about getting it. IHC ftw
First
Reese Anderson lol
+bad_wolf 265 I couldn’t resist haha
Reese Anderson nice truck btw
How much was the cost of the truck
Yea djm is garbage ineed that inez kit
Ugly rims..
not yo truck bro
Did you alignment issues when it was 4” in the front ?
First
What is the name of those rims