Great video! Your Helmet screws came out easy. mine are stuck. I will try the screwdriver twist, but if that doesn't work; what size and thread bolt do we use in the other holes to force it out? Thanks
looks easier than doing the same on a alpha one; on mine,the raw water pump has a good impeller, but it does not pull ANY water from the bottom of the boat; customer overheated the AQ151C,melted one piston, and i rebuilt it; now on testing,NO water flows, there is no suction, both coolers and ex manif are ok; do you think it might be the outer hose by the bellows that came apart or loose,or maybe the P/S cooler maybe?
This Was Very Good Information
Definitely great information thanks again! Oil cheats would be awesome!
Great info!!!
Thanks for watching!
Great video! Your Helmet screws came out easy. mine are stuck. I will try the screwdriver twist, but if that doesn't work; what size and thread bolt do we use in the other holes to force it out? Thanks
From memory Ithey are either 5/16 or 3/8 whitworth
looks easier than doing the same on a alpha one;
on mine,the raw water pump has a good impeller, but it does not pull ANY water from the bottom of the boat; customer overheated the AQ151C,melted one piston, and i rebuilt it; now on testing,NO water flows, there is no suction, both coolers and ex manif are ok;
do you think it might be the outer hose by the bellows that came apart or loose,or maybe the P/S cooler maybe?
It could be the hose or a blocked pick up at the bottom of the leg check those before the cooler.
How would you suggest to get it apart once all 4 bolts and nuts are out. Can’t get mine to separate from the lower unit
A few taps with a soft mallet should break the seal.
I one a 1964 Penta you might interested?