Filament from PET bottle
ฝัง
- เผยแพร่เมื่อ 1 ก.พ. 2022
- V2 Build (Petamentor) is finally OUT!!! (Complete for free)
• Filament from bottle f... ❤️
Just wanna say Hi and THANK YOU FOR YOUR SUPPORT WITH LIKES! ❤️
TUTORIAL: petamentor.com/
STL: petamentor.com/stl-files/
PARTS: petamentor.com/parts-list/
Our Forum: petamentor.com/forums/forum/d...
DIY PET filament from Bottles with DIY Petamentor machine 💪
SUBSCRIBE to all available tutorials and parts! 😈 - แนวปฏิบัติและการใช้ชีวิต
Sweet !!! World love the tutorial to make one !!
Sure, I will make in a few next days ;)
Wow nice machine cant wait to see the build video and how too build it !:) thanks a lot!!
Thanks 👍, actually I'm working on simple and cheap version. Allready got working one, but still improoving 😉. Video will be soon.
@@OndrejSraitr thanks a lot :) a salute from Montreal ,Canada :)
So Impressive project and you did so much efforts for this.I really appreciate it!!! . Can u Plz make a Future Video on how to colour these filaments too. It will help alot.Thanks!!!
Hi. Thanks for excellent video. But I have a question. How can I get the pulley system of the motor and spool?. Thanks again. :)
very cool!!!
Thank you
Hello, how do you weld pet strip together ?
Klasická dvoulitrovka Braniku :DDD
Co jineho by se dalo doma najit? 😁
Hi sir will you please notify me about which types of elements used in filament maker like motor type and what which type of heating device and name as well eventually I am working on this project and I have some confusion I am waited for you response as soon as possible....
Excellent video . What size nozzle do you use?
Hi, thank you. You can find full parts list on petamentor2.com
Do You have a vídeo on how to Made the machíne that heats and shapes the plastic from a flat strip to a cilinder? It's the only part that I'm missing
No for this build, but you can watch Petamentor tutorial. Its very detailed tutorial for building the simplier one 👍
Можно два отдельных куска филамента вместе спаять, чтобы не заниматься перезарядкой катушек
is the filament hollow inside or solid because mine is a bit hollow. i tried drilling 2.0 because i didnt have 1.75 with me so tried testing it with 2.0😅 is it because of the big diameter of the nozzle what do you think??
Hi, yes there is hollow 🫡
Why not build a crusher to do filaments?
dobrej braník
Why do you use the fan? Do you have to cool the filment as it leaves the extruder?
Hi, no. The production speed is not too high. The production temperature is to low for making any visible filament changes during the pulling. Its not melting in the nozzle. Its only heated to easy bend it and join on both sides (yes this pet filament is tube with hole in the middle) this is the reason to lift up the flowrate in your slicer
@@OndrejSraitr Thank you, what type of motor did u use? How does your motor system work?
I have been working on a project like this for myself so that I can use some dual extrusion and use recycled PET for support/infill material. I cant wait to finish this project, but bit seems the most time consuming part is removing the label adhesive/glue from the bottle. Anyone have any tips? My best luck is vegetable oil, which is wasteful and messy and could possibly just be setting me back more than buying real filament.
Oh man, thats so bad 😄, it depends on your local possibilities. For me is the best 2litres bottle from the local beer. 👌
Use a razor scraper
If youre in the States there's a stuff I use to remove label glue, called "Goo Gone" Its great. Just sprinkle some on the glue.. and it will rub off with your fingers in a matter of seconds. Stronger glues, the Goo Gone will need to sit on it for a minute and require a scraper. Just keep dabbing more onto it as you rub/scrape it. It has never failed me.
@@ChristopherJones16 I am, and I am a strong believer in the power of goo-gone, but I tried it and I didnt seem to have much luck. Perhaps it was just a stubborn bottle and its worth giving it another go.
Im too struggling with so many things about pet filament. But you have to keep trying, nothing else. Thats the best way to learn something valuable!👍😁
pekna praca, tiez robim podobne od zneipasa, ak to dobre chapem rezes flasu na 7mm hrubku? pri tlaceni aku hrubku trysky pouzivas?
Diky, mam klasickou 0,4 prevrtanou 1.5 vrtakem. projel jsem ji vickrat, nez jsem se dostal na 1.7-8. Sirka prouzku je odvisla od tloustky steny materialu. Tohle je petka od braniku (7mm sirka)
@@OndrejSraitr diky, a ked tlacis pouzivas klasicku 0.4mm trysku alebo pouzivas iny rozmer? u niektorych som videl ze pouzivaju 0.6-0.8 trysku, predsalen tento domaci filament nie je najrovnejsi a najcistejsi, preto sa pytam ci sa ti neupchava.
Koukam, ze tam pouziva nano pro regulaci hotendu. Libilo by se mi to daleko vic, nez pouzivat skoro celej reprap koncept. Mas nejaky tutorial na to arduino (pid), prosim?
@@chovicko ano, tryska 0,4. moc jsem toho jeste nenatiskal, chtel jsem jen sestavit neco co bude fungovat. staci zvysit flowrate na 130% kvuli podextrudovani. jinak filament muze mit hezkej prurez, relativne konstantni. Zalezi na tom, jak nakrajis PETku a na teplote, rychlosti a chlazeni. Tenhle navijak ma komplet tistenou prevodovku a ta celkem kulha => nema konstatni rychlost tazeni a neni to idealni. prave stavim V2, ktera bude mit jen svoji "built-in" prevodovku s dc 12V motorem a lehce odnimatelnou, malou civkou. Zatim se mi tryska ucpala jen pri prechodu zpatky na PLA.
@@OndrejSraitr viac krat som sa snazil odpovedat a dat tu aj odkazy ale asi mi to mazu... zneipas ma na thingiverse odkazy aj na plosny spoj dosky, aj firmware atd... daj si vyhladat petpull, taktiez ma aj skupinu na telegrame kde najdes dalsie veci
"Harvest time!!!" 😁😁😁
😁 yep my favourite part 🫡😂
prosimte jak jsem jmenuje ta část která ten plast zahřívá rad bych to nekd zkusil objednat
hi mate. looking for the firmware for this set up.. help please .
👌👌👍
Thank you sir! ✌️
hey. I thought it was really cool and for that reason I was interested in setting up this project, however, when I try to access the links they are no longer working.
Hi, sorry to hear that. What links are not working please? I will update them 👍
@@OndrejSraitr thanks for answering. actually none of the links available in the description of this video are online.
Hello. What diameter you have at the nozzle 1.6 or 1,7?
Hi, I used a 1.5mm drill bit. Then I wobbled a little bit. I cant measure it, dont know how. It was a try and fail method, untill I suceed. Now Im getting about 1.65- 1.8mm filament. This wast the same with flowrate setting in cura. I had to test a few settings, finally I stuck on 140%. Its work for me very well.
@@OndrejSraitr THANK YOU VERY MUCH
You're welcome 😉
MK8 has a 1.5mm nozzle.. may not need to even drill it. But youll probalby need different heater and thermistor. I dont think the V6 ones will fit into a MK8 heat block. So far the MK8 and I think the Volcano are the only hot ends that have the 1.5mm nozzle. I believe the MK8 is cheaper than a volcano setup so probably better off going with that.. but to keep it simple youll probably just want to get the V6 setup and just drill the hole to 1.75mm. The #51 drill bit will get you a 1.70mm hole.
Hi, its a great poin, will vheck it. Thank you 👍
Je nějaký způsob, jak bych vás mohl kontaktovat ? Rád bych prodiskutoval určité detaily práce. Již jsem vás zkoušelkontaktovat skrze myminifactory, ale nevím jak čast se tam vyskytujete, proto zanechávám zprávu i zde. Předem děkuji za odpověď.
Dobry den, omlouvam se, jsem k zastizeni na fb ve skupine petamentor 😉
Hey Bro! Can u share this fimware from rumps?
Very impressive 👍🏿 Please I would like to have the STL files to make one.
Im remaking this machine to smaler, cheaper and more simple version. Whole project with STL files will be availible very soon.
@@OndrejSraitr All right that sound nice. I look forward to seeing the new version. This will really help us at our innovation center here at GearHub, Nigeria. Most of ones we came across where not English speakers and it was so difficult for us figuring what is exactly the set up. Until then have a good time making!
there is new concept. this is extra small and from only cheap parts...
photos.app.goo.gl/AFur1KbqhNcn3HrM6
Some one help me, I done everything. Came up to the filament. Now I have filament.. changed ender 3 with all metal hotend also.. now when I am printing , extruder crushing the filement and it is not moving into the hotend.as filament crushed, extruder not pushing filament . Is my filement because of crushing not feeding into the hotend or as it is crushed the extruder is not pushing in the filament...i am struck.
Is it Dual gear extruder setup?
how to draw those circuit diagrams
👍
thanks man 😉😁
Is it solid filament or tube like?
Its a tube 🤪
@@OndrejSraitr What is the size of strip and how much pulling power is needed ?
Hi this filament will work on sapphire Pro?
Hi, thats a good question. There are some prerequirements for sure.
Nozzle temp 260C, bed temp 70C. The rest is unanswearable. It mostly depends on your petamentor nozzle diameter. If you make to small hole, the extruder wheels will sliping. Thats all I can tell you.
How to make extruder
💕👍
🥳👍❤️
Wait for the this video tutorial
I want this project bro,can you made for me
Can you tell me how much volt are you using? I am doing it manually
Hi, youre doing manually what? 😁 My PSU is 12V 5A actually. Hope it helps you 👍
@@OndrejSraitr and you are powering it with all 12? Because when i do that it starts melting and dripping and when i give it less it is not a perfect line
Yes, everything is Powered with only one psu. What are you using for temp regulation?
right now i have connected the heating element to a charge and power supply. I didnt want to buy any electronics because i didn't know if i could do it (so no, i dont use a thermistor). Right now i wont to power it with the exact volts to melt it down to a line (if you dont know the exact volts, do you think that i should invest in the electronics or not?)
Try to look at my Petamentor project. Parts are cheap as hell and there is a full tutorial for assembling. We have community forum to help new builders. Visit petamentor.com
I think there is no way how to achieve good results without thermo controller.
Hello, 1:43 do you have stl files of this support? Thanks
Oh, so sorry man, its already deleted. Do you need some? I can make some for you 😉
@@OndrejSraitr its ok thanks xD I printed another from internet, I will test the filament machine tomorrow xD I was printing the stl's xD today I will test the electronics parts, thanks again xD
Is this safe? I'm worried about the possibility of fumes.
Bruh
hello! Can you sell this finished? How much?
I'm actually trying to do one with nema17 arduino uno and a lcd screen the purpose is to do a -30 Euro extrudeur
this could be better one. This is almost full Rep Rap 3D printer. Too much parts and too much of everything 😁
hows the build going/?
@@timgoodliffe I have no time to do it for the moment 😂
that is Cool how can I get all kit
Thank you. There is only one kit for diy pet filament machine. But its made from ender3 printer, wich is waste of parts I think. But you can follow some tutorials for the petamentor machine. Its easy and cheap 😉
2:11 thats in my language lol btw its CZECH
has anyone figured out how to farm multiple bottles into one long strand?
No, I cant find any methods to make one long strip from multiple bottles. But output (filament) can be joined. 👍
@@OndrejSraitr how?
Im personally using filament runaway sensor to change next filament string into an extruder (its the most easiest way for me). There are some arduino project for automatic use and some difficult methods with candle and womans hair ironing machines. Try to search “pet filament joining” 👍
Your comments in notification bar scares me every time 😂. Every time pops up only “TH-cam studio- Ghost in the system…” and my reaction is allways: “WHAT THE HELL IS THAT?!😦” 😂
I would like to buy this machine for you
Hi, its not or sale😉. Check my Petamentor project and find somebody who can build it for you. Maybe it could by good bussiness to sell them
Você pode vender ela ?
Hi, unfortunatelly no. Im providing only free project. Try look at PETamentor and PETamentor2. 🥳
Can i buy it?
Sorry, no
nechceš to prosím udělat česky a dát ty věci co si tam požil do popisku .
priste hodim treba titulky, cz je precijen malinkej rybnicek. Tomuhle prijektu se dal nevenuju, byl na vyrobu zbytecne slozitej. Prave dokoncuju nalinkou, jednoduchou a levnou verzi. Koukni na to dalsi video. Tomu venuju tutorialy a rozpisku materialnu samozrejme nalinkuju i s stl soubory.
@@OndrejSraitr ok děkuji a kdy bude
Vzhledem k tomu, ze pracuju na tri smeny to bude chvilku trvat. Tady je prozatim posledni video, predvedeni konceptu
th-cam.com/video/79gkUiH3ipE/w-d-xo.html
how to build this machine
Hi, got another tutorial for Petamentor machine, try to watch it😀
@@OndrejSraitr I thank you for the speed of response and thank you for this content. You are doing a great work
Thank you, nice to see you satisfied ✌️😉
hai its very nice. can you share your mechanism STL files to me for free😬
Hi, sure. Link is on Petamentor.com 😁
Flaška z Braníku viď?
Yes 🫡😆
really, you tattoed your back of your hand ?
Is it too unusual?
Shit, I got all my comments deleted for spamming all your vids at once. :D
How can it not be produced at 256℃? The nozzle thickness is 0.4
Im not sure If Iunderstand. There is a part with nozzle. It has to be drilled.
Petamentor The Nozzle
th-cam.com/video/WH65QqU2NoA/w-d-xo.html