ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Best video I’ve seen of this process yet
Thanks bro! Yeah not much info about doing the rears properly
Fix your oil leaks. I pull my motor to refresh all the oil gaskets and makes it so much easier and a fun learning experience
The leaks aren’t that bad, will be fixed when I build the motor 😎
keep your work
Finally, a really good video covering the meaning behind "cutting rear fenders" is extremely in-depth, and I am looking forward to doing it to my wagon now. What is the tool setup that you used for your angle grinder and Dremmel?
Thanks mate! I just used a cut off wheel on my grinder and dremel as well as a flappy disk on the grinder, worked a treat!
Could've done 9J all around square it would've had less understeer, and less rubbing.
Wouldn’t have been able to fit a 265 on a 9J, need all the width I can get 😎
@@jpbuilds5 265 fits perfectly square on a 9 inch
@@imnota bit of a stretch on a 35 sidewall, plus my old wheels were 9.5 so wasn't keen to downgrade ;)
Hi, what's your wheels specs and offset? Also, what brake rotors and size do you have front and rear?
Hey mate, they are 18x9 +35 front and 18x10 + 35 rear. Running 340mm f80 4 pot brembos front and stock e46 m3 rear brakes (327mm rotors)
@jpbuilds5 thanks for the response mate! Gonna do a build the same as this.
@jpbuilds5 sorry for the follow up. Did you do a wheel alignment on this? Toe, camber, etc? It could be another good video for this.
@@driver_18 yeah bro ofCourse! I plan on doing a follow up shortly
Which Break is That ?
Front brakes?
Does it rub if you drive aggressive?
Maybe only slight rubbing on the rear bar but I plan to fix that soon 😎
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
Best video I’ve seen of this process yet
Thanks bro! Yeah not much info about doing the rears properly
Fix your oil leaks. I pull my motor to refresh all the oil gaskets and makes it so much easier and a fun learning experience
The leaks aren’t that bad, will be fixed when I build the motor 😎
keep your work
Finally, a really good video covering the meaning behind "cutting rear fenders" is extremely in-depth, and I am looking forward to doing it to my wagon now. What is the tool setup that you used for your angle grinder and Dremmel?
Thanks mate! I just used a cut off wheel on my grinder and dremel as well as a flappy disk on the grinder, worked a treat!
Could've done 9J all around square it would've had less understeer, and less rubbing.
Wouldn’t have been able to fit a 265 on a 9J, need all the width I can get 😎
@@jpbuilds5 265 fits perfectly square on a 9 inch
@@imnota bit of a stretch on a 35 sidewall, plus my old wheels were 9.5 so wasn't keen to downgrade ;)
Hi, what's your wheels specs and offset? Also, what brake rotors and size do you have front and rear?
Hey mate, they are 18x9 +35 front and 18x10 + 35 rear. Running 340mm f80 4 pot brembos front and stock e46 m3 rear brakes (327mm rotors)
@jpbuilds5 thanks for the response mate! Gonna do a build the same as this.
@jpbuilds5 sorry for the follow up. Did you do a wheel alignment on this? Toe, camber, etc? It could be another good video for this.
@@driver_18 yeah bro of
Course! I plan on doing a follow up shortly
Which Break is That ?
Front brakes?
Does it rub if you drive aggressive?
Maybe only slight rubbing on the rear bar but I plan to fix that soon 😎